Tacoma Barricade HD Rear Bumper (2016-2019) Review & Install

  Рет қаралды 24,675

ExtremeTerrain Toyota

ExtremeTerrain Toyota

Күн бұрын

Shop This Barricade HD Rear Bumper: terrain.jp/2WtOX7B
Subscribe for Daily Toyota Tacoma Videos: bit.ly/2FtUeUw
If your 2016-2019 Toyota Tacoma sees use both on and off-road, you should replace that wimpy factory rear bumper with one that can handle the extra abuse. This Barricade HD Rear Bumper is designed to provide excellent protection from all kinds of hazards, while adding rugged styling to your Tacoma. This Barricade Bumper is ideal for those who don't shy away from adventure where ever it may be found.
Barricade manufactures their HD Rear Bumpers to precise specifications from 3mm thick steel plate for superior strength and rigidity. Barricade then completes their Bumpers in a two stage finish using epoxy pre-coating and high-grade textured black powder coating for long lasting durability.
Barricade Rear Bumpers were engineered to be a direct bolt-on upgrade replacement for your Tacoma's original stock bumper reusing the factory mounting points. There is no cutting or modifications required for a simple straight forward install. With the help of a friend and a set of basic hand tools this Barricade HD Rear Bumper can be installed in about two hours.
This Barricade HD Rear Bumper is designed to fit all 2016-2019 Toyota Tacoma models. This Rear Bumper is designed to work with models that are equipped with or without rear mounted backup sensors. terrain.jp/2WtOX7B
Item TT1046
----------------------------------------------------------------
🎞Subscribe for Daily Toyota Tacoma Videos: bit.ly/2FtUeUw
Facebook: / extremeterraintacoma
Instagram: / extremeterraintacoma
ExtremeTerrain.com is your shop for the best in Toyota Tacoma aftermarket parts and accessories!
www.extremeterrain.com
#tacoma

Пікірлер: 30
@ExtremeTerrainToyota
@ExtremeTerrainToyota 5 жыл бұрын
Shop This Barricade HD Rear Bumper: terrain.jp/2WtOX7B Subscribe for Daily Toyota Tacoma Videos: bit.ly/2FtUeUw
@neoanderson7898
@neoanderson7898 3 жыл бұрын
After I got rear ended I purchased this bumper and I really wish I had it in the first place, this thing is absolutely amazing quality
@ExtremeTerrainToyota
@ExtremeTerrainToyota 3 жыл бұрын
We're happy to hear you're happy with the bumper, Neo! Good thing is if something happens again (God forbid), I think your bumper will be the one doing most of the damage next time. -Zach
@yotaforlife8408
@yotaforlife8408 4 жыл бұрын
nice clean fit just wish it had better backup lights
@rodlewis4047
@rodlewis4047 4 жыл бұрын
Why not just plug into or tap into one of the factory license plate light plugs?
@overthehandlebars
@overthehandlebars 2 жыл бұрын
The Fab Fours bumper is very similar but uses the factory license plate lights and trailer plug. Direct swap over no mods required
@ericx4124
@ericx4124 4 жыл бұрын
I ordered one from you. Should be here today.
@ExtremeTerrainToyota
@ExtremeTerrainToyota 4 жыл бұрын
Awesome, Eric! We hope you enjoy it! -Zach
@Zachary_Pacheco
@Zachary_Pacheco 3 жыл бұрын
Awesome video! I wish you could have mentioned the back up assist sensors tho! Thanks of the help
@getnautical9579
@getnautical9579 4 жыл бұрын
When removing the lights and trailer plugs is it easier to do when number installed or once bumper removed. Once plugs disconnected that is of course
@Jeziorski7
@Jeziorski7 3 жыл бұрын
please make one that supports bsm that keeps your factory trailer hitch
@rayf982
@rayf982 4 жыл бұрын
What did you do with the factory light plugs?
@almostsk8terjamie
@almostsk8terjamie 4 жыл бұрын
Does the bolts for the back up sensors come in the kit???
@oniisaac9081
@oniisaac9081 4 жыл бұрын
how heavy is the bumper?
@Wickytang
@Wickytang 3 жыл бұрын
Where can I find this circular light? Not sure why they don’t just come with the bumper.
@seanmurray4966
@seanmurray4966 5 жыл бұрын
Make one with dual license plant light that match oem and add two step cutouts in the bottom corners to make getting into the bed easier. Please
@briancarpenter6413
@briancarpenter6413 5 жыл бұрын
please God!
@yungwats2189
@yungwats2189 4 жыл бұрын
Niceeeeeeeeeeeeeeeee
@jerrymack6123
@jerrymack6123 2 жыл бұрын
question: Why remove the original light fixtures if they will not be re-used? Don't they just get the heave-ho as part of the original "bumper" ?
@denttech8447
@denttech8447 2 жыл бұрын
No one has a video on how to remove the cover to reinstall it WITHOUT REPLACING IT. Its easy if you have a new bumper you dont have to worry about braking bv the tabs on the cover.
@kayumanggi_filipina
@kayumanggi_filipina Жыл бұрын
oh my....$331 to ship in AK!!! 😭
@tubertine83
@tubertine83 11 ай бұрын
The license plate light provided with this bumper is absolute crap.. I’m replacing this bumper after one week. Was intended to replace damaged stock bumper which was quoted at 2k from a superficial fender bender. If this bumper facilitated the stock license plate lights then I could live with it. Not bad but not great either.
@useryggfdcc
@useryggfdcc 3 жыл бұрын
This bumper mess up departure angle for sure. My Taco do hardcore off road 😒.
@tazzyrew
@tazzyrew 5 жыл бұрын
Do the lane assist sensors work with this bumper as well?
@Dtally293
@Dtally293 4 жыл бұрын
tazzyrew I doubt it. I’ve been looking at new bumpers too but each one I’ve seen say they don’t work with lane assist/BSM. I think the steel interferes with the sensors.
@mattlewandowski73
@mattlewandowski73 4 жыл бұрын
it is my understanding that the metal will interfer, however, the real question is does someone make a bumper that can be modified to support them. I am very much interested in an aftermarket bumper that gives me some decent recovery points, and a place to mount a spare tire carrier, and more importantly something that will not get cracked up so easily on the trail. so far I am coming up with a lot of "I don't know" from factory reps of various companies.
@jasonmolihan6930
@jasonmolihan6930 4 жыл бұрын
Sorry, hate me if you want, but the stock bumper looks better.
@ExtremeTerrainToyota
@ExtremeTerrainToyota 4 жыл бұрын
No hate! Everyone has their own tastes and there's plenty of manufacturers out there. Thanks for watching! 😁 -Zach
@jzila9900
@jzila9900 4 жыл бұрын
Im one of those ,I love the black aftermarket one
@almostsk8terjamie
@almostsk8terjamie 4 жыл бұрын
No hate here, but if you accidentally tap that plastic/aluminum foil factory bumper it will crack and bend so easy. not to mention it wont protect the tailgate from damage either. Man these plastic vehicles nowadays .... they dont makem like they used to.! peace.
2016-2021 Tacoma Body Armor 4x4 PRO-Series Rear Bumper Review & Install
19:50
ExtremeTerrain Toyota
Рет қаралды 39 М.
3rd Gen Tacoma Rear Bumper Cover Removal and Installation
7:24
infosponge
Рет қаралды 78 М.
Мы никогда не были так напуганы!
00:15
Аришнев
Рет қаралды 6 МЛН
How Many Balloons Does It Take To Fly?
00:18
MrBeast
Рет қаралды 129 МЛН
아이스크림으로 체감되는 요즘 물가
00:16
진영민yeongmin
Рет қаралды 56 МЛН
КАК ДУМАЕТЕ КТО ВЫЙГРАЕТ😂
00:29
МЯТНАЯ ФАНТА
Рет қаралды 3,8 МЛН
Ironman 4x4 Raid Rear Bumper Suited For 2016+ Toyota Tacoma | Install Guide
22:44
Hidden Features on the 3rd Gen Toyota Tacoma
8:14
The Unrestricted
Рет қаралды 92 М.
2016-2021 Tacoma Body Armor 4x4 HiLine Series Front Bumper Review & Install
38:55
ExtremeTerrain Toyota
Рет қаралды 142 М.
Should you buy the latest Toyota Tacoma 2016-2021?
27:42
The Car Care Nut
Рет қаралды 768 М.
NEW Rear Bumper Installation! [1st Gen Tacoma Upgrade Part 2]
15:01
Giving My 3rd Generation TOYOTA TACOMA A DRASTIC NEW LOOK! + GIVEAWAY!
13:35
EQUIPAMENTOS TOP ? #moto  #motopeças
0:12
Moto Peças 10.0 - Diego Enzweiler
Рет қаралды 25 МЛН
Choose car for Dad 😄#supercars
0:23
Earn Edix
Рет қаралды 8 МЛН
Çokk iyi bir tatktik. Gitti araba😁 #keşfet #comedy
0:15
Savas Aslan
Рет қаралды 5 МЛН