When I did my blower bracket I put a small zip tie on the spacers that way you can still start the bolts then cut them off with no issue. Also the pro meth direct port system is nice. Also with the blower and head adapter gaskets I put a lil Vaseline on them, makes it easier to line everything up.
@corymessick92366 жыл бұрын
Just finished my built 5.3 LSA swapped 2001 Silverado this week. Street tuned Sunday and can't wait to get it dialed in on the Dyno. Trucks making great power.
@JohnDoc6 жыл бұрын
love the new intro
@rickygray77676 жыл бұрын
Awesome video, so much more detail than any other video I have seen on adding LSA supercharger to 5.3. Great job!!!
@theoiv6 жыл бұрын
This was good. I think my 2011 Tahoe will be coming to RPM for the same thing. Time for me to work some overtime.
@Dauntless.steadfast.fortitude5 жыл бұрын
Who is this guy ? Awesome info. Clarity, straight forward, well detailed, easy to listen, easy to follow, easy to learn from. Thank you for your time & humbleness. You are a great & clever teacher. I can tell you are very methodical, precise, & deliberate bcuz you are an open minded student. Look forward to sequels & more builds. I'm currently collecting parts & knowledge for a similar build. Keep up the great work.
@HighPSItv5 жыл бұрын
Thanks for the great comment
@thehoule702 жыл бұрын
Looking good ,I want to put one on my 08 vortec max !!
@delanon3t6 жыл бұрын
Great video, I’m doing the same swap on an ls2 car. Fun watching it happen on a different platform.
@MrTimdtoolman16 жыл бұрын
This is going to be awesome once you get it figured out. I'm looking forward to a dyno run to see what kind of gains you get. Great work Brother.
@Justin87GN6 жыл бұрын
I haven't watched the whole video yet.. but if this thing doesn't have a 4L80 yet, plan on doing that as soon as you get the blower on. When we did the Procharger on our Denali back in 05 it fried the stock trans in like 500 miles on only 5 psi. We've been through 2 built 4L65e's since then. Finally going 4L80 now
@about20886 жыл бұрын
Justin87GN I've watched all your vids, it was inspiration for mine. Like you, I'm going to go 4l85e once I have all the parts.
@EGGINFOOLS6 жыл бұрын
I love that you are doing your own work. It's nice to follow you on your journeys. Keep it up. Much love from Detroit. I have a 4.8 regular cab I want to do this on.
@HighPSItv6 жыл бұрын
+EGGINFOOLS Hell yea. Thanks for the support.
@EGGINFOOLS6 жыл бұрын
High PSI tv You do your own work. How could I not sub and hit the bell. Lol
@heavykevy52586 жыл бұрын
Dont tell john doc, but you are my favorite. Keep up the good work my friend.
@HighPSItv6 жыл бұрын
+Heavy Kevy I won't 😁
@paintdude96able4 жыл бұрын
Smithfield's my favorite . Every time I go home I get Smithfield's and bring it back to GA.
@trentdawg28323 жыл бұрын
Salt cured ham.....yumm...that shit is good on breakfast bisquits in the cold winter
@dragbikedemon6 жыл бұрын
New intro Rocks!
@davidrobertson45386 жыл бұрын
Hey man. I’ve called you guys in the past about my 04 Silverado SS with the LQ9 6.0. I’m ready to start making some big changes. I’m coming back up there soon to work out what I’d like to do. Love the channel.
@johnnyninetytwo Жыл бұрын
Did you ever go
@truckguyjoe6 жыл бұрын
Can't wait for the dyno pulls and tire smoke in the shop parking lot!
@Sandkei6 жыл бұрын
That new intro is really good!
@HighPSItv6 жыл бұрын
+Sandkei John Doc can do some good editing.
@saabeater6 жыл бұрын
"More meth than I will ever use." All your followers in Johnston county are extra tuned in now
@xavierjohnson81986 жыл бұрын
Stephen Barbour i am dying laughing at this
@about20886 жыл бұрын
You didn't need a new water pump.. it slightly touches it but won't harm anything. Oh and two wires need to be swapped going to the map sensor, because it doesn't match the truck pinout.
@HighPSItv6 жыл бұрын
+About20 it would also hit the new front drive bracket
@about20886 жыл бұрын
Ah, yea I forget your not using the same kit as me.
@06goatm66 жыл бұрын
i used to be a tech and i appreciate your technical approach to videos. However a little constructive criticism, take it or leave it, and maybe im off, but id speed up some of the time lapses a little bit, some of them are a little long winded. Other wise keep up with the videos i enjoy the content and the ideas and execution. I'm sad to see you only at 5k subs, but hopefully that keeps growing, I don't see any reason why you and John shouldn't be at like 50k-100k
@michaelcoleman52586 жыл бұрын
nice work
@matthewherring80426 жыл бұрын
need to race the TA when it stock....
@matthewherring80426 жыл бұрын
with the lsa on it.
@47mossracing6 жыл бұрын
You got to let us know the total project cost when it is all said and done. Considering doing this myself, but when it is all added up i wonder what is the cost difference in just putting on a magnacharger kei
@steveww076 жыл бұрын
I think the truck will be fun, but after seeing that acc bracket setup, I think I would have went turbo instead.
@Lysdexis5 жыл бұрын
Caaaarl... that kills people.
@MRALL4FUN6 жыл бұрын
Great video man
@HighPSItv6 жыл бұрын
+ALL 4 FUN thanks
@matthewherring80426 жыл бұрын
hellllll yea love it.
@TylerSmith-xv4yn3 жыл бұрын
Dude would you be willing to come to northern minnesota and do your magic in my Tahoe!!?? I will pay your way plus work!
@FortyTwoAnswerToEverything6 жыл бұрын
Awesome. BTW, please fix the audio where you are too far from the camera to hear. The editing software should have some kind of auto-gain somewhere to amp up quiet parts
@miket26076 жыл бұрын
Well boys and girls....you're looking at approximately 3,500-5k bucks worth of parts. Depends on how you shop (new/used). Should be badass though
@timmarkham5224 жыл бұрын
I’m curious if you could have just De-pinned the old injector plugs and slid them Into the new plugs?
@prentice5086 жыл бұрын
So that 07 n up water pump was a direct fit? Cool if it was cause the previous year ones were faulty.
@HighPSItv6 жыл бұрын
+prentice508 Yes it is
@prentice5086 жыл бұрын
High PSI tv thanks for the info.
@djay236 жыл бұрын
Subscribed
@bertpeterson26686 жыл бұрын
I can't wait to see the Tahoe done it's going to be badass!! I have access to a LSA supercharger I have a 08GMC 2500hd with the 6.0l it's been cammed bigger injectors & tuned!! How mush did all the extra accessories cost you? Thank you for sharing your Tahoe build!! You have me thinking really hard about doing this to my truck!! I was going to turbocharge it but I think that a supercharger would be more reliable!! 👍🇺🇸🦅
@trbolvr886 жыл бұрын
Bert Peterson , turbskies are fun and definitely make crazy pwr, iv built and had personally many of both , I use to turbo everything I touched because in my town when I started driving the turbo awd eclipses and talons were what to have and were kings of the streets around here ,but with getting older and alot of experience lol if I'm doing a more daily driver setup deff go with supercharger, way more reliable esp if your not really into working on your car/truck much . long term in my experience anyway s.c is way to go for a daily just my opinion , don't get me wrong I'm a avid turbo lover esp if your primarily drag racing for the tunability, alot more adjustable for racing conditions . Not saying which to go with to each his own , but again imo , doing more street daily driving and hit a drag race once a month S.C it doing more track/street racing turbo everytime lol
@bertpeterson26686 жыл бұрын
overkill automotive performance I pull a lot with this truck it's pulls really good it has the 6L90E tranny & I put 410 gears in it also & that helped a lot I just want a little bit more hill power & try to get some better fuel economy!! My buddies keep telling me to get a Diesel but I'm just not a Diesel guy!! So in your opinion what would you think would fit what I'm looking for?👍🇺🇸🦅
@HighPSItv6 жыл бұрын
+Bert Peterson I will have to figure out the total cost. Without the blower included I would say you're going to have two grand and parts.
@edwardmoon52216 жыл бұрын
I lmao at all the comments trying to tell the professional how to do what he does for a living
@trbolvr886 жыл бұрын
Edward Moon I know rite , he's obviously done his research and not his first time around the block lol always gotta have the "you tube mechanics" telling every one what there doing wrong lol gotta love em ,even if you know 98% of there drag cars don't run , that's if they even really have one lol
@HighPSItv6 жыл бұрын
+Edward Moon I'm really good at pretending I know what I'm doing
@about20886 жыл бұрын
overkill automotive performance you do understand that the lsa blower is a piece together kit and this is his first time installing one. Granted he's doing a good job, some of us "KZfaq mechanics" have actually done this. My setup, lsa lower, zli lid, stock ls9 injectors, 92 mm TB, 3 bar map on 2bar SD tune, all on a Yukon Denali XL (06) . The "kit" wasn't designed for the truck, so there's lots of parts and research that has to be done to drop it on. There's nothing wrong with giving advice
@moment81032 жыл бұрын
What part number is that bracket from ls simple? Very confused on where to find it
@trentdawg28323 жыл бұрын
Can I run my 3bar map to the 2 bar map?....I wanna do this swap to my ls3 headed lq9 with 11.25:1 compression and truck accessories in a 1974 nova....u think it will work with my fitech 70050 ultimate ls ecu.....I'm hoping so..I don't have room for a centrifugal supercharger or money for a Maggie or edelbrock high dollars unit...
@HighPSItv3 жыл бұрын
I dont understand what you're asking
@fieldshelby2 жыл бұрын
cant find that bracket setup on his page, can you give the link?
@georgem.61366 жыл бұрын
Would have been the perfect time to put the 18% lower on
@HighPSItv6 жыл бұрын
+George Mitchell To many PSI man
@JohnDoc6 жыл бұрын
High PSI tv the channel is called High PSI not low psi
@georgem.61366 жыл бұрын
John Doc Exactly...Just send it...”Dab”
@jacobrecord824 жыл бұрын
What did you think about the Lssimple bracket? I’m considering buying his 8 rib setup.
@frankierwhereyouralwaysast9033 жыл бұрын
Hey brother, can you please tell me everything I should get for a lsa blower to be installed in a 2012 escalade?
@HighPSItv3 жыл бұрын
Best bet is to buy a kit. Search online
@tahoebaby34624 жыл бұрын
I have a 04 tahoe 5.3 3" lift i know what i want out of it but not sure which way to go with my tahoe. Ls1 with supercharger bulit on.
@GS-cy8iy6 жыл бұрын
I know when a person decides to go supercharged you don't think about mpg . But I am curious to know how much it will change , especially with this being your daily . How much does it change on a road trip etc . So if you don't mind include a video with that information also . Thanks .
@about20886 жыл бұрын
G S depends on how often you keep your pedal out of boost..
@GS-cy8iy6 жыл бұрын
About20 lol gotcha
@about20886 жыл бұрын
Your belt issue is because you pressed that Powerade ring pulley on to far, although the instructions say to do it, dont.
@HighPSItv6 жыл бұрын
+About20 I pressed it flush. The design has changed. I'm the lucky test subject.
@kennethallen10374 жыл бұрын
What's the first thing you ever did too the tahoe..
@HighPSItv4 жыл бұрын
Tuned it
@NickF-kd2su6 жыл бұрын
Damn I wanted to do this to my tahoe but it seems way too complicated
@the_truck_farmer2 жыл бұрын
Did you build your 4l60 trans? How did it hold up?
@edwardmoon52216 жыл бұрын
Coolant to help heat up? That don't make sense
@JohnSmith-qn5ib3 жыл бұрын
Would you say for my 2011 GMC Sierra with swapped 6.2 l92 would be a easy transition to lsa blower? Any recommendations for my built?
@HighPSItv3 жыл бұрын
Look for kits. It's easy
@kennethallen10374 жыл бұрын
I have a 2002 what's the first thing I should upgrade
@HighPSItv4 жыл бұрын
TUNING for sure
@harrysacket5 жыл бұрын
1:37 lol
@marcoarias60484 жыл бұрын
How much would that cost to put on the same truck
@harryguy766 жыл бұрын
If the blower is not on yet how do you know the belt won't stay on...it is one big belt right??? or the pulleys not in line with each other??
@HighPSItv6 жыл бұрын
+harry guy it was on, for a short period. Had to switch some stuff up on the other pullies
@Three6GMC6 жыл бұрын
Did you just cut off EV6 fuel injector connectors to just splice in other EV6 connectors?
@HighPSItv6 жыл бұрын
I changed the pin on the wire
@ryanhansen17585 жыл бұрын
I've got a 97 tahoe. Not sure if an lsa would be a better route over a procharger. I feel a procharger might be easier/better. What do you think?
@HighPSItv5 жыл бұрын
Procharger would definitely be more bolt on
@ryanhansen17585 жыл бұрын
@@HighPSItv I've been rattling this crap in my head for 2 years now. I think procharger it is. I'm all broken so if something goes wrong I won't blow my back out hunched over the motor. Yup that's it
@D.hodge875 жыл бұрын
I’m looking to add this same setup to a 07 TBSS with LS2 that has LS3 heads and ls9 cam. Do I still need the bracket for the accessories? Since I have the Ls3 heads I won’t need the adaptors either, is that correct?
@HighPSItv5 жыл бұрын
You will need brackets,but no adapter plates.
@KeithBrousseau6 жыл бұрын
Thanks for my High PSI T Shirt. Do you have any used Turbo Systems For LS1
@HighPSItv6 жыл бұрын
Glad you got it. Nothing used laying around right now
@aztekink14136 жыл бұрын
What brand is that cold air intake I'm new too your channel thumbs up👍
@HighPSItv6 жыл бұрын
I made it myself
@monterico24675 жыл бұрын
How much is this transaction together??
@qtrpounderjosh41826 жыл бұрын
you also emphasize TAhoe
@robertoflores14 жыл бұрын
would ls1 water pump work?
@adamseay48935 жыл бұрын
where did you get the injector connector, weather pack combo from?
@HighPSItv5 жыл бұрын
I believe casper
@ricktokle58486 жыл бұрын
😎🇺🇸👍 Good Stuff!
@scoobee95 жыл бұрын
Wonder if that can be used on my 97 454?
@HighPSItv5 жыл бұрын
It will not fit correctly
@benjaminmccrink64153 жыл бұрын
How long did it take to source all these parts?
@HighPSItv3 жыл бұрын
A few weeks
@Joeshomegarage6 жыл бұрын
Did I miss who makes the kit?
@HighPSItv6 жыл бұрын
LSSimple
@delonking77876 жыл бұрын
Will this work on a 05 Yukon all wheel drive.
@HighPSItv6 жыл бұрын
Yes
@mazi20656 жыл бұрын
How’d you like your Spectre CAI?
@HighPSItv6 жыл бұрын
+Mazi 206 Worked fine
@dickbuttkiss85366 жыл бұрын
FIRST!!!!!!!!!!!!!!!!
@chevvy526 жыл бұрын
U trying to sell the cold air intake im local to the clayton nc area?
@HighPSItv6 жыл бұрын
+chevvy52 Sure
@chevvy526 жыл бұрын
High PSI tv sweet ill have to swing by later this week got a price in mind?
@HighPSItv6 жыл бұрын
Hundred bucks
@havikgilm21214 жыл бұрын
Did you do any mods to transmission?
@HighPSItv4 жыл бұрын
Yes. RPM level 6
@havikgilm21214 жыл бұрын
High PSI tv oh ok your videos have def comforted Me through this painful task lol
@havikgilm21214 жыл бұрын
High PSI tv also one last question I’m putting lsa in a 2008 Denali 6.2 .. do u think it’s necessary for me to swap out cam or would I be ok with running stock cam
@HighPSItv4 жыл бұрын
You can run the stock cam. Youd make a lot more power if you ran an aftermarket one
@jonathanc51176 жыл бұрын
Why not just put a turbo on it
@HighPSItv6 жыл бұрын
I should have. But the blower seemed like a cool idea
@michaelescobar41116 жыл бұрын
How much will that kit run ?
@HighPSItv6 жыл бұрын
+Michael Escobar like all parts and labor included?
@michaelescobar41116 жыл бұрын
High PSI tv sure that will help I got a stage 3 built tranny idk to cam out my 5.3 and supercharger it or drop in my 6.0 and supercharger it
@about20886 жыл бұрын
Michael Escobar this can be done for around 3000-3500 if installing yourself, without tuning.
@ZO6Dylan6 жыл бұрын
Can you LSA swap an LS7?
@HighPSItv6 жыл бұрын
Idk. Not sure you would want too. A whipple would be a better bet
@KeepCruzin6 жыл бұрын
Ill take the old intake off your hands, all that clutter in the shop gets annoying 😉 lol