Taking apart Epson inkjet printer XP-312 XP-315 XP-320 XP series

Рет қаралды 42,350

Күн бұрын

Пікірлер: 44

@johncronk1338 3 жыл бұрын

This is a great video, thank you for making it. I just got a used printer which doesn’t print at all. Now I can take it apart and clean the print head with my ultrasonic cleaner. I hope it works in the end. Cheers from Canada btw.

@bettyspies1761 22 күн бұрын

Thanks 😊

@joesophie90 4 жыл бұрын

Absolutely brilliant.

@2Langdon 4 жыл бұрын

Excellent guide, thanks very much.

@mcBiker 4 жыл бұрын

Thanks, u saved me

@abokaiser1393 3 жыл бұрын

Thanks

@soyunomas5605 4 жыл бұрын

Perfect!

@Electronicview 4 жыл бұрын

nice service printer epson

@alecboudreau8271 4 жыл бұрын

Your video is amazing, one small problem, I accidentally pulled the cable out behind the printer cartridge carriage for which you said "DON'T REMOVE THIS CABLE" ........any advice on how to get it back in? lol It's a real bear to try to push back in, not enough room to put it back in at all, totally see why you said don't pull it out

@mariacocis4639 2 жыл бұрын

Thank you so much absolutely brilliant for an old lady like me. I can do it.

@XwwwEPICwwwX 4 жыл бұрын

Thank you! I need to clean the print head and this video was a life saver.

@beratozel2720 4 жыл бұрын

You could take a warm towel and clean it up? I did that too ....

@CrazyRandomBean 3 жыл бұрын

How do you put the flat cable on the side back in?

@soniablade928 3 жыл бұрын

The cable that they said don't remove came off. Now I am not able to put back. Please help. Thank you

@tiborvisi7438 4 жыл бұрын

I accidently pulled out the upper part of the narrower flat cable from behind the cardridge compartment. I never did before. How can I remove the cartridge compartment from its rail?

@thomasgibert8590 3 жыл бұрын

Hello, Nice and precise video thank you. I have one question, how to remove the whole carriage please ?

@viandant5 3 жыл бұрын

Sorry I have no instructions for that

@terminator82 3 жыл бұрын

Hi, thanks for the video. I followed the instructions and cleaned the print head. After putting back together it now says there is a paper jam. Any ideas what I did wrong? Thanks

@viandant5 3 жыл бұрын

may be a paper sensor is out of position. Check the flags where the paper exits

@Neuralatrophy 4 жыл бұрын

I removed the "other" cable, the 3rd one on the print caddy... how the heck do I get access to its plug to get it back in ?

@viandant5 4 жыл бұрын

you have to dismantle the printer, starting from the side panels

@jm1662 4 жыл бұрын

Did you have any luck because I did the same thing...

@SnazzyJazzy17 4 жыл бұрын

Having the same problem. I'm not sure how accessing it from the sides help since the metal plate directly behind the print head unit is still in the way of even my tiny fingers being able to secure the cable in place.

@soniablade928 3 жыл бұрын

@@SnazzyJazzy17 where you able to fix it?

@steven8148 4 жыл бұрын

Sir. Can you create a video for L210 epson repair? Thanks!

@viandant5 4 жыл бұрын

Currently I have not an L210 in my office, but if I find one of them I'll do it for sure

@aimallamiasiamerafzim2675 3 жыл бұрын

please my printer cartridge cariadge head id damaged how can i get another one?please?

@viandant5 3 жыл бұрын

Try alibaba or aliwxpress, or search with google. Every country has its distributors, I don't know which is the best for you

@florencecollignon6712 4 жыл бұрын

I removed a little piece like a miror by mistake and don't know where to put it back? somebody could help? the message is now they don't recognise BK

@viandant5 4 жыл бұрын

Sorry I don't know. Did you dismantle the scanner unit too?

@florencecollignon6712 4 жыл бұрын

@@viandant5 yes i put it of to move the other pieces, now the mesage is impossible to recognise the BK (black)

@lukaszpluku 4 жыл бұрын

@@florencecollignon6712 I have that same problem - did You find solution ?

@lukaszpluku 4 жыл бұрын

Its on the right side wher the inks are :) when you unscrew the bolt, the element falls out (small plate), you have to put it in there, and then screw in - if you have problem - contact me :) or visit photo: zapodaj.net/3e260266df1c6.jpg.html

@florencecollignon6712 4 жыл бұрын

@@lukaszpluku thank you so much the little miror is in his place again, and i finally changed the black color and managed to print tonight so happy!

@lukaszpluku 4 жыл бұрын

Hello i need a small adwice - could i contact with U somehow ?

@viandant5 4 жыл бұрын

Sure, if I can I'll help you

@lukaszpluku 4 жыл бұрын

@@viandant5 You movie helps me a lot, but I have model epson XP 235, opening was very similar as on the movie but during opening some small part get out and I do not know what this is. It's such a small plate (propably from ink part but not chip), I have a photo or could I send you this photo somehow?

@viandant5 4 жыл бұрын

@@lukaszpluku link.accessori@libero.it

@lukaszpluku 4 жыл бұрын

@@viandant5 thanks for email. I send You an information and photo on this email.

@didiervandermynsbrugge2541 4 жыл бұрын

code erreur 0X9A

@viandant5 4 жыл бұрын

It's related to the ink cartridges

@richardkell4888 3 ай бұрын

Good to see this, but my brain can not cope with this complexity, I've no idea what the fck I am looking at .... existing printer I smashed to the ground; refurbished replacement ordered from ebay. It had better fckng work. Yet more expense.

@viandant5 3 ай бұрын

if you never disassembled an epson printer it could be complicated