So good to see manufacturers showing a field strip. Seems silly but with so many different setups these days and with this type of cost it’s good to see the manufacturers take the time to show you how to work their products.
@user-jb5og2ey5o5 ай бұрын
I was still having a lot of trouble with the slide stop, but then i yelled skiddily doo and it went right in. Thanks!
@alchemy19115 ай бұрын
the "skiddily doo" is the most important part.
@noluck334 ай бұрын
First let me say Thanks for not having NO Ads!!!
@ovidiopruneda18975 ай бұрын
been disasembling the my old Colt gold cup for more than 50 years and haven't seen a dramatic change in performance and I'd say,no change at all...but whatever works for you
@SaintJoy185 ай бұрын
Weird... So very, very weird... I've been carrying a 1911 for almost 30 years and didn't realize there were any ways other than this to field strip... Browning was an f'n genius!
@rockylindgren58855 ай бұрын
This is referred to as the army marksmanship method
@alchemy19115 ай бұрын
Some people just need to be taught!
@farhan.naushad5 ай бұрын
Then you need to watch Roy Huntington of American Handgunner more often. :-)
@user-oe5ll3lx3zАй бұрын
That bushing moved clockwise is not going to hurt anything if it does a marine don't need it! 30 year marine sgt. Hoorah little wear on barrell bullshit😂
@classicgunstoday19725 ай бұрын
I just tried breaking my Springfield GI .45 this way. It works but, for me anyway, it’s easier to take the slide spring out the front first (I can do it easy without it flying off into the world or into my eye or my dog’s eye in the room with me). I can even do it without looking.
@rockylindgren58855 ай бұрын
Hilton Yam calls this the army marksmanship method. Glad to see alchemy putting out a video on how to take down a 1911 the right way
@alchemy19115 ай бұрын
The right way indeed
@Ronin-jp7si5 ай бұрын
Well, I proved I'm an idiot, again. I used this method and managed to launch the GI guide rod across the garage and into that mysterious place where all firearms parts go to hide. I'll find it when I move... Good to have a 1911 spare parts bin.
@TheGreyBeardBiker5 ай бұрын
I’ve done it this way for years. But I learned to field strip my 1911s the GI way.
@alchemy19115 ай бұрын
As did I, and most folks! This is definitely the better way, imho.
@chrisboon45263 ай бұрын
This was a very informative and easy to follow video, thank you Sir!
@wheelguns4wheelmen8025 ай бұрын
Thanks for this. Actually learned something new and useful, which is rare these days.
@alchemy19115 ай бұрын
Glad it was helpful!
@janemarkham41333 ай бұрын
NEVER SEEN DISASSEMBLING THIS WAY. I LIKE YOUR WAY OF DOING IT, IM GOING TO TRY IT MY SELF!! GOOD THING IS , I CAN REVIEW YOUR VIDEO AGAIN & AGAIN IF NEED TO!!!! THANKS BROTHERMAN🙂👍🙃😊~~ HOWARD M.~~ 4/12/2024
@NCSUMAX5 ай бұрын
Fantastic Eli. A lot of us needed this. Thanks!
@alchemy19115 ай бұрын
Glad it was helpful!
@nickbullard424 ай бұрын
I prefer the gi method on standard guide rods. Now on the full lenghth rod guns this is easier. Those spring plugs are so sharp, without the tool or something to press it down, is a nightmare!
@ronphillips63365 ай бұрын
Great video, I use both methods at work. This one is a bit more difficult with a light rail. One trick I like is pop the single side thumb safety out, install slide stop with no pressure from plunger assembly. Reinstall thumb safety. Simple, of course doesn't work with the ambi safety. Many thanks for the video.
@82lowe36id5 ай бұрын
Great video man! I do not own an Alchemy, but I sure am thinking about it more each day.
@Ronin-jp7si5 ай бұрын
Informative, nicely explained and nicely demonstrated, Eli. This method will definitely reduce the amount of space junk in orbit! Looking forward to a possible complete lower disassembly video from you. JMB was a genius, but he must have chuckled when he designed the disconnector and sear whenever he thought about the poor person first learning how to put those little devils back into the pistol the right way...
@bhoover14Ай бұрын
Excellent video. Educate and entertain. In Eli we Trust.
@timtrax918artisan85 ай бұрын
Its nice to hear a name for this method that ive used for sometime. Thank you again for your informative content.
@alchemy19115 ай бұрын
No worries!
@tuttifongul200612 күн бұрын
i locked my slide with the safety, push the plug and rotate the bushing with my fingers. then i remove the plug as this is the least tensioned position. then ill pull the entire spring out, unlock the slide and the rest is, the rest. ive been doing this since i bought it in '03 and my CQB has never had any issues with any guide rods taking out light fixtures or grinding material into my bbl.
@steelluxuries5 ай бұрын
Nicely explained.
@robertcharlesworth68833 ай бұрын
This is also the Ed Brown preferred method, my bushing is so tight that it's almost impossible to turn at the end of the barrel. I have a two piece full length guide rod (also by Ed Brown) so I unscrew and remove the front of the guide rod first. It does take doing it a few times to get used to doing it this way, but I am comfortable with it now. Thanks for the video.
@DARTHDANSAN2 ай бұрын
I just got a 1911 and I’m having hard time putting it back together. I’m for sure don’t want the idiot scratch. Great video . I’m need friend help my put it back together. I’m never gonna take it apart again what a nightmare
@jamesgardner735220 күн бұрын
Right !!!that barrel catch pin doesn't just push back in so easy like they show
@powercouple5605 ай бұрын
Thank you for the tip--!
@alchemy19115 ай бұрын
Happy to help!
@turkeyhunter76173 ай бұрын
Cool 😎 👍
@forensicanatomy5 ай бұрын
Magnum PI!
@w.w.90472 ай бұрын
Jokes on you! I don’t take my Alchemy apart. I just shoot and lube it. Doing just fine so far.
@jcomp42075 ай бұрын
Been shoping for a high end 1911. Digging the Alchemys. Now to narrow down which one.
@alchemy19115 ай бұрын
We appreciate that! Let us know if we can help you narrow it down!
@johnalward21045 ай бұрын
this is a great video, but i’ll always remember your original tear down video on the shag carpet table.
@alchemy19115 ай бұрын
🤣🤣
@fngolfer53124 ай бұрын
Will the Alchemy slide stop fit other 1911s?
@toddprobasco97285 ай бұрын
Never seen someone wear a wool sweater under a wool sweater.
@diondecker98955 ай бұрын
Ha ha ha
@TheGreyBeardBiker5 ай бұрын
It must have been cold and damp that day in NC!
@highxj4 ай бұрын
Might be a bit of a bear with the 24 lb spring in my NH 10mm's, but I'll give it a whirl. I don't want to scratch my spring plugs, ugh.
@mrmaddog695 ай бұрын
Eli - you know about the ACW1776 SN Prime Elite Commander FS on Addicts right? Surprised you haven’t snagged it yet 😎
@jacksmith80024 ай бұрын
I'd rather address the bushing 1st and take the pressure of the recoil spring
@Nontacticalboy5 ай бұрын
I do this since forever, always wondered why bother with the hastle of removing the barrel bushing first.
@pyeitme5085 ай бұрын
Wow
@user-lg3sk5fq8g5 ай бұрын
Tolles Video 😂du hast alles falsch gemacht was möglich wäre 😂😂 LOL
@franzisler2212 ай бұрын
DISASSEMBLY STARTS AT 1:48
@charles175085 ай бұрын
🎉🎉🎉
@edwinsane37694 ай бұрын
Enlighten me pls? Don’t u need to stick a paperclip in to be able to remove barrel and spring? 1911 newbie here..
@doranmaxwell17552 ай бұрын
Does it work on a series 80 with GI guide rod?
@evantheman46435 ай бұрын
Could you field strip a ACW the G.I way I only have one hand so I can’t do the ACW way
@steveferguson83673 ай бұрын
I don’t understand (I admit, I’m new to 1911s). In fact, just got my first one from ACW. I tried this way and hard a hard time doing it (compressing the spring, sliding the frame on with all that pressure, inserting the slide stop with spring pressure). My buddy came over and showed me how to assemble with no pressure on the spring (I guess that’s called the GI method?). It seemed a heck of lot easier. Am I missing something? What are the advantages of doing it this way? Will it affect gun function?
@alchemy19113 ай бұрын
I laid out the advantages in the video: the GI method will open you up to scratching your recoil spring plug, but more importantly, with the barrel in battery you're applying uncharacteristic wear to your bushing/barrel fit when the bushing is turned. This is the way many custom 1911 pistols are taken apart. As I stated, this method is something that you will need to practice, as it is more involved. However, once you know how to take apart a 1911 this way, you'll probably do it with all your 1911s- as I do.
@HWG-wm8ld5 ай бұрын
This takes three times as long.
@alchemy19115 ай бұрын
No…. It does not
@dcb8055 ай бұрын
Sure does
@gdvan015 ай бұрын
👍
@msgt19424 ай бұрын
This is the only way bushingless or compacts can be taken down so nothing new at all. I prefer the original old method! But am forced to do it in defenders officers compacts which is a pain. With a 5 inch its not so bad 16 lb spring, longer slide. On compact 22 lb spring shorter action uughh. The old way is NOT TRICKY AT ALL and u dont fight springs and can use to hands on slide release
@ronaldnocita11065 ай бұрын
Cabot? Are you affiliated with that company?
@jaysonmadlock28445 ай бұрын
Where is Rob at
@robertallen88412 ай бұрын
Tokarev’s are easier that way. I’ll stick with designers method and use the bushing….
@alchemy19112 ай бұрын
Oh yeah? You carry your gun with the hammer up like he designed (ref. 1911 & 1913 patent)?
@robertallen88412 ай бұрын
Has nothing to do with disassembly. There’s more than one way to do most things. Like watching some kid fumble with a pocket hammerless.
@alchemy19112 ай бұрын
@@robertallen8841 LOLOL.
@JugglesGrenades5 ай бұрын
Interesting.... but I will continue to take mine apart the way the US Army taught me.
@aarondbritt5 ай бұрын
Does ACW offer full length guide rods?
@HWG-wm8ld5 ай бұрын
Dawson precision
@alchemy19115 ай бұрын
We do not
@pauljensen6699Ай бұрын
Who’s disassembling their 1911 any other way than this?
@HSmith-uk9hl5 ай бұрын
ACW way? Been doing it that way for over 30 years after being shown how by a gunsmith who had been doing it for decades longer.
@KITESWJSАй бұрын
A whole lot of Bullsh#t ..... I've carried for over forty years without any problems !!!