Taking the FANATEC CSL Elite pedals to the HALL (sensors) of fame!
Рет қаралды 3,649
9 ай бұрынThese Fanatec CSL elite pedals were with problematic potentiometers.
So I tried the Hall sensor mod done to these pedals, to get them to victory lane!
Happy sim racing! Have fun!
Datasheet of the sensors I used (bought from aliexpress):
www.diodes.com/assets/Datashe...
3D print files and instructions from the original author:
/ comm. .
3D Print STL: drive.google.com/file/d/1Q9Ru...
Step By Step guide with alternative magnet fixation.
/ comm. .
I'm not a professional, so I'll admit that sometimes my repair attempts can make things worse. Please don't attempt to copy anything you see on this channel. If you try to mimic my methods and your computer starts to make car engine noises and leaves the room, well, you're on your own... good luck with that!
@Tuxinator66 5 ай бұрын
Got the same Pedalset and found a great Man in Spain who builded a complette Set to change from Potentiometers to Hall Sensors, since then i never had Problems of any Kind with the Pedals. The change made clear that Hall Sensors are more precise than these Potentiometers, i never want them back, the Load Cell in its Kind is a very good Peace and i choosed these Set of Pedals because the LC is 16 Bit. The higher Priced Pedals Set at the Time i get mine was only 12 Bit, thats why i choosed the Elite Set. Nice Video to show how Anybody can change to Hall Sensors. Greetings from Racer to Racer
@jurgieldetka5469 3 ай бұрын
something happend and links to products and to instrucion dont work its like "404 error" could You re upload ? Regards Poland
@_RETROFIX_ 3 ай бұрын
www.reddit.com/r/Fanatec/comments/ji7dyn/step_by_step_diy_guide_for_replacing_csl_elite/
@Petroskoi3000 9 ай бұрын
I just swapped the pots, for hall sensors, put a Arduino micro in the box of the old pcb, and called it a day. Now I have great pedals, for my Elite dangerous HOHAS setup. Going to mod my Fanatec wheel pedals too, when I have time. Hall sensors FTW!
@_RETROFIX_ 9 ай бұрын
Yeah! No more pot cleaning is a blessing. I use hall on my modified g25 pedals also and they are awesome.
@JavierMares 2 ай бұрын
Hi, I'm planning to do the same thing for my CSL pedals, switching to Arduino (and maybe standard sensors, if the potentiometers are not standard), because I don't want to depend on Fanatec for maintenance. Do you have a website or tutorial of some kind I could learn from? Thank you
@GraphicFrost 6 ай бұрын
Awesome man! Unfortunately none of the links are working, could you please share them with me?
@_RETROFIX_ 6 ай бұрын
Thanks for the info! Here is the link: www.reddit.com/r/Fanatec/comments/dknimb/fanatec_csl_elite_pedals_diy_hall_sensor/
@Shootzy-em1dv 3 ай бұрын
Can anyone send me print file?
@_RETROFIX_ 3 ай бұрын
drive.google.com/file/d/1Q9Ruk0A1jtoFUf8mav7U_ryUqV0-pR8a/view
@novelvue4122 7 ай бұрын
Awesome mod. Will do this swap on my own pedals. Can I ask why you are not changing the brake to hall sensor?
@_RETROFIX_ 7 ай бұрын
Thank you! The brake pedal is a load cell, and that's a pretty good pedal!
@Case_ 5 ай бұрын
You could at least use some heatshrink on the connections, that blob of hot glue is just horrible. Nice work otherwise.
@_RETROFIX_ 5 ай бұрын
Thank you! I'll try to make it better looking on the next one ;)
PADLOTOON
Рет қаралды 34 МЛН
Nikita Zdradovskiy
Рет қаралды 7 МЛН
Robert Tinsey - VRS Satellite Racing
Рет қаралды 26 М.
REZAKEAL
Рет қаралды 4,5 МЛН