TAMIYA 1/35 JAGD PANZER ELEFANT【Welded seams and Zimmerit coated sheet】

Рет қаралды 11,030

moshiyan`s hobby scale model research

2 жыл бұрын

Hello everyone. This is an assembly video of Tamiya 1/35 ELEFANT. I tried to reproduce the weld marks using epoxy putty, which I had done only a little before. I am not satisfied with the result, but I think it was an experience that I can make use of in the future.　One more thing, I used Zimmerit coating sheet for the first time. Here's a video of the results! Best regards!
皆さんこんにちは。今回はタミヤ1/35　ELEFANTの組立動画です。以前ほんの少しだけやったエポキシパテを使っての溶接痕の再現を本格的に挑戦してみました。結果　めっちゃむずかしかった　笑　満足はしていませんが、今後に活かせる経験だったと思います。　もう一つ、初めてツィンメリットコーティングシートを使ってみました。結果は動画でどうぞ！よろしく！

Пікірлер: 31

@owenmayes2128 2 жыл бұрын

Excellent stuff as usual. One thing I noticed, the gun shield appears to be upside-down.

@scalemodelresearch 2 жыл бұрын

Thank you! I'm glad you commented. Gun shield upside down? Seriously! I hadn't noticed that... lol

@detlevwalter7495 2 жыл бұрын

Great modelling build 👍

@scalemodelresearch 2 жыл бұрын

Thank you! I'm glad you commented.

@josecesar8657 2 жыл бұрын

Looking great!

@scalemodelresearch 2 жыл бұрын

Thank you! I always appreciate your comments.

@manuelgonzalez4378 2 жыл бұрын

Nice Job! doing big tanks is always exhausting, but yours totally worth it!!!!

@scalemodelresearch 2 жыл бұрын

Thank you! It's a really nice comment.

@rrl4245 2 жыл бұрын

Looks great! Thanks for showing us both your failures and successes with that weld bead technique. I too have considered it, but I've been too frightened to try it. (And I remain too frightened.) Ralph

@scalemodelresearch 2 жыл бұрын

Thanks for the comment! I'm glad. If you try everything, you might see things you couldn't see. Have a great weekend!

@fransvoogt9925 2 жыл бұрын

Nice, zimmerit looks great!

@scalemodelresearch 2 жыл бұрын

Thank you! I'm glad you commented.

@michaelperry4308 Жыл бұрын

The welds around the actual machine gun mount are extremely messy and consist of several beads of "pigeon shit" weld, on the vehicle loaned to Bovington at least.

@scalemodelresearch Жыл бұрын

I see. I'll learn something. Thanks.

@ThatAussieBloke1 2 жыл бұрын

with the welds you have to let it sit in the groove for a few minutes so it will stick to the plastic

@scalemodelresearch 2 жыл бұрын

Thank you! I'll give it a try next time. Thanks for letting me know.

@ModeliteDiorama 2 жыл бұрын

This is a big monster:D

@scalemodelresearch 2 жыл бұрын

yes！thank you👍

@panzer-meister 2 жыл бұрын

お疲れ様でした。ツインメリットコーティング、ドイツ戦車を作る上では避けて通れませんねぇ。デカールは私も使ってみようと思っているので、参考になりました。やっぱ、初めからぶつ切りで貼るのが良さそうですね。

@scalemodelresearch 2 жыл бұрын

ありがとうございます。デカールの方が厚みが無くていいかと思いましたが、貼りにくかった！今度はタミヤのシート試してみます。パテを使って自分でやるのはどうも上手くいかなそうで　笑

@rivetcounter1358 2 жыл бұрын

You should use metal wire for the tow cable. Do not tear apart paper: cut it strait with blade or scissor. Great work anyway!

@scalemodelresearch 2 жыл бұрын

thank you🙌

@rrl4245 2 жыл бұрын

I use .015 solder wire. It's cheap, very malleable and in scale for 1/35. Order spools on Amazon... It is a much better solution than string.

@statoilbensin2190 2 жыл бұрын

Wery nice cast texture! If you want longer working time with the putty you can use Tamiya lacquer thinner with retarder or the mr leveling thinner. I guess you already know this, I dont like using cement for thinning putty because I think it dries too fast.

@scalemodelresearch 2 жыл бұрын

Thank you! You're right, I thought the putty was drying too fast! LOL I guess you're right. I'll give it another try when I get a chance.

@AFV85 2 жыл бұрын

I found the exact same to happen with tamiya putty useless haha but then it's old stuff I used the newer stuff was better but the green stuff putty was just fantastic worked perfectly first time no faffing around lol 😂

@scalemodelresearch 2 жыл бұрын

Thanks for the comment. I see!!! Is it hard to use the old one? I didn't know that. I'd like to try the green putty.

@sferguson1130 Жыл бұрын

I know this is six months old, but if you haven’t gone back to working with it yet, you just need to dampen it with water, from a small paintbrush