Tamiya

Рет қаралды 26,228

4 жыл бұрын

For a kit that's over 20 years old, Tamiya still holds their own. This was a very fun kit to build and to paint up. I was really surprised by how easy Army Painter paints were to airbrush. I used Vallejo Airbrush Thinner at about a 60-40 ratio of paint to thinner. That being said I'm really excited that The Army Painter is releasing an all-new Airbrushing Medium, which has is thinner and flow improver, and that just sounds excellent and will make airbrushing a whole lot easier and more fun.
Just be careful as Mineral Spirits will strip off this paint almost instantly. This is why I was using Enamel thinner in the video, for the panel line wash. #corsair #armypainter #tamiya
A big thanks to Robert at the Model Makers Union, who sent me this kit, you can check out his Facebook page here: / 297836094235989
Music:
Horizons by Scott Buckley / scottbuckley
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/horizons-scott-buckley
Music promoted by Audio Library • Horizons - Scott Buckl...
Lights Of Elysium - AERØHEAD / aerohead
Creative Commons - Attribution-ShareAlike 3.0 Unported - CC BY-SA 3.0
Free Download / Stream: bit.ly/lights-of-elysium
Music promoted by Audio Library • Lights Of Elysium - AE...
Undertow by Scott Buckley / scottbuckley
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/undertow-scott-buckley
Music promoted by Audio Library • Undertow - Scott Buckl...
Track: Wanderlust - CRASTEL [Audio Library Release]
Music provided by Audio Library Plus
Watch: • Wanderlust - CRASTEL |...
Free Download / Stream: alplus.io/wanderlust
Stars in Her Skies - Steve Buckley
kzfaq.info?v...
New Dawn - Ben Sound
/ @bensoundmusic
www.bensound.com

Пікірлер: 109

@rebelsatcloudnine 4 жыл бұрын

The F4U-2 Corsair was designed as a night fighter. Several early F4U-1 Birdcage models were taken off active duty and brought to the states for refitting. These new -2 models featured a bulbous radar pod on the wing and the removal of one 50 Cal to compensate for the weight. These night fighters were designed mainly at the request of the troops on the ground that were bothered during the nights by the Japanese forces flying around the islands, not exactly doing the best for the troops moral. On the plus side these -2 Corsairs were actually quite successful in their role. Another notable feature were the longer night time exhaust stacks on the underside of the aircraft. This Corsair "Black George" was the 4th option with the Tamiya kit and has a few minor errors, I should note that I didn't find this picture of "Black George" until the build was nearly completed and I found it by accident. 1: The wheels are incorrect for this version and should have a tread pattern. 2: On a close inspection of the photograph, it appears that this Corsair has the blister on the main cage that housed a rear view mirror and not the straight back birdcage design as was built. 3: The radar equipment for the interior is not present with the kit, but I can't fault Tamiya for this as I don't believe any F4U-2's still exist.

@stevethefishdotnet 4 жыл бұрын

I was wondering if that growth on the one wing was a malignant tumor in need of a biopsy.

@josecesar5952 3 жыл бұрын

That looks awesome!

@davidmaya8516 4 жыл бұрын

What a beautiful Corsair, congratulations!

@krugmeister7301 4 жыл бұрын

Excellent Job And a AWESOME kit and Aircraft..👏🏻👏🏻👏🏻🤗

@robbo1068 4 жыл бұрын

Very nice job indeed! Your modeling skills create most impressive models......lots of great ideas demonstrated and excellent visuals. Congrats.

@jeffleduc1398 4 жыл бұрын

You nailed that finish! She looks amazing 😉

@GYRUSS 4 жыл бұрын

It is quite mesmerising watching you work. Nice music too.

@rebelsatcloudnine 4 жыл бұрын

Thanks Rich, I'm glad that the music is good. It took me 2 days to find some appropriate music.

@secretariat-13 4 жыл бұрын

Absolutely love this particular aircraft, my fav of all time, more so than the P51 and spitfire, the Baa Baa black sheep squadron show was special to me mainly because it showcased this aircraft, good job putting it together..

@modart6339 4 жыл бұрын

I love the painting of this, beautiful model !

@rebelsatcloudnine 4 жыл бұрын

Thank you kindy Michael :D

@p40f20 4 жыл бұрын

Never seen a Corsair painted like this before. Very nice!!!!

@rebelsatcloudnine 4 жыл бұрын

Same here, but I only found one picture of it after I basically had it completed. It looks darker in the pictures, but I'm pleased with it.

@waynehayman8183 4 жыл бұрын

Absolutely great work and uplifting to watch during the current crisis

@rebelsatcloudnine 4 жыл бұрын

Thanks Wayne, I'm glad that the video is helping. I'm certainly getting a lot done on my current project. Maybe I'll have another up sooner than I originally planned, provided those new wheels arrive in the mail soon.

@MrOrmesby 4 жыл бұрын

Great build and an excellent video presentation of same. I always enjoy watching your builds. Thank you..from the U.K.

@derekpierkowski7641 2 жыл бұрын

That's a beauty!

@jzghostrider66 2 жыл бұрын

I REALLY LIKE that COLOR very nice.

@russellgosselin3325 4 жыл бұрын

Excellent model building and video making. Always a pleasure to see your work!

@rebelsatcloudnine 4 жыл бұрын

Thanks Russell, always great to see you around. Have you worked more on your Lancaster?

@russellgosselin3325 4 жыл бұрын

@@rebelsatcloudnine Yes, I have been working on the Lancaster. Fuselage is glued and filled. Waiting for a canopy mask set. Too much greenhouse for me. Can't wait to start painting.

@rebelsatcloudnine 4 жыл бұрын

@@russellgosselin3325 I agree completely, I did that to both of my Lancasters almost at the same time and it nearly killed me. I've got 2 more Lancasters to build and I'm just going to buy mask sets for both of them... and the 3rd one I'm also going to buy. I think I've got a Lancaster addiction.

@tommyboyscalemodeling4988 4 жыл бұрын

Absolutely beautiful build Jared!

@michaelhintz5870 4 жыл бұрын

She looks GREAT!!!!!! Very Nice Build!!!!!

@rebelsatcloudnine 4 жыл бұрын

Thanks Michael :D

@SprueFascinationChannel 4 жыл бұрын

Beautiful work.

@brianliddle2197 4 жыл бұрын

Nicely done, it looks just right. I have that kit myself, I'm glad you've shown us how it's done! Excellent!!!

@rebelsatcloudnine 4 жыл бұрын

Thanks Brian, did you get my e-mail a while back? I think it might have gotten lost in the junk mail?

@brianliddle2197 4 жыл бұрын

The last email I received was 1/20/20

@brianliddle2197 4 жыл бұрын

Check your email I sent you a message

@andreasdahms3056 4 жыл бұрын

Looks great. Thx for posting

@rebelsatcloudnine 4 жыл бұрын

Thanks for watching Andreas :D

@FlyingSModels 4 жыл бұрын

Great looking Birdcage! Enjoyed seeing it come together!

@rebelsatcloudnine 4 жыл бұрын

Thank you very much :D I've grown rather fond of the Birdcage, it's got a menacing appearance.

@jcwoodman5285 3 жыл бұрын

Sweet🤗. You nailed that faded sun baked shade o intermediate blue!

@panzer-meister 4 жыл бұрын

Hi, it's nice work. Especially, painting is very impressive and understandable. I'm going to watch your another video. Thank you !!

@rebelsatcloudnine 4 жыл бұрын

Thank you very much :) I'm glad that you enjoyed the build.

@RussellModelCars 4 жыл бұрын

great looking build

@joshuajames2832 4 жыл бұрын

Stunning.

@cellardwellerproductions5125 4 жыл бұрын

Absolutely wonderful.

@rebelsatcloudnine 4 жыл бұрын

I appreciate that Dave :)

@TheWaggishAmerican 4 жыл бұрын

Thanks for providing a song list also. Gives me some good ideas

@rebelsatcloudnine 4 жыл бұрын

Well, I sort of have to or face the wrath of KZfaq.... again.... and again.... and again...

@TheWaggishAmerican 4 жыл бұрын

@@rebelsatcloudnine lol I can relate. Although I'm not yet hooked up to adsense and only recently got the point where I would even be eligible. I have never had a video taken down for copyright- usually the owners just stick ads on for themselves.

@rebelsatcloudnine 4 жыл бұрын

@@TheWaggishAmerican I'm going to be resposting one of my videos as this is the 3rd time I've been hit with a copyright claim.

@EthanBuildz 4 жыл бұрын

I know I'm late but this kit looks like it goes together really nicely, I might have to give it ago myself

@rebelsatcloudnine 4 жыл бұрын

Thanks Ethan, it's and older model but it's still a lot of fun and it fits together really well. One day I'd like to try the 32nd scale kit.

@monkey555500 4 жыл бұрын

fantastic

@TheWaggishAmerican 4 жыл бұрын

That light blue is to die for. Nice job. Never a huge fan of the corsair, but something about the birdcage always got me.

@rebelsatcloudnine 4 жыл бұрын

Thanks TWA :D I was really thrilled with the colors after I had removed the maskings. Yeah it looks more aggressive, kind of like the birdcage is like a helmet or something.

@johnmccarthy684 4 жыл бұрын

rebelsatcloudnine p

@matthausrex5973 4 жыл бұрын

Lovely build mate, Not seen that colour before but I like it. Well done!

@rebelsatcloudnine 4 жыл бұрын

Thank you, I agree, this Corsair was just odd enough in all the right ways for me to build :D

@dennisgraham3087 Жыл бұрын

AWESOME JOB. I Hope I can build one and at least come close to how beautiful you built and painted yours.

@Eugen_TV 4 жыл бұрын

nice kit! subbed!

@EventHorizonModels 4 жыл бұрын

Very nice build as usual

@rebelsatcloudnine 4 жыл бұрын

Glad you like it :)

@cushionbelly2519 4 жыл бұрын

Good build. I like that you didn't over do it with the chipping and weathering. Very subtle detail. 👍🏻👍🏻👍🏻

@rebelsatcloudnine 4 жыл бұрын

Thanks David, I do like some of the more weathered Corsair's, but it just didn't feel right for this build. Still I wanted it to have a nice used effect.

@gsr4535 4 жыл бұрын

Very nice. And rare, the F4U-2 night fighter if I'm not mistaken. Well done! 👍

@JDsHouseofHobbies 4 жыл бұрын

That is stunning! I see you're using Army Painter paints. You're the third modeler that I've seen use them. I bought a set but haven't had a chance to use them yet.

@rebelsatcloudnine 4 жыл бұрын

They make an excellent primer for something that's an acrylic, it's pretty hardy and you can sand it down. Plus their Flat Base is the best I've ever come across, far superior to the Tamiya Flat Clear. I was really impressed with how nice these are to airbrush, and that I had a lot of control with the paint. At first they were clogging up the tip of the airbrush, but some Tamiya Acrylic Retarder sorted that out quickly and I was back in action.

@Harikejn 4 жыл бұрын

Very excellent work pal. Greetings from Novi Sad.

@rebelsatcloudnine 4 жыл бұрын

I thought that said "Greetings from Nova Scotia" Gee, my brain is off lately.

@Harikejn 4 жыл бұрын

@@rebelsatcloudnine The city is Novi Sad, which is in Serbia. You can find it on internet if you are interested.

@user-fn2ov5bm2e 4 жыл бұрын

It's cushdy! I love it.

@undraftedplayer 4 жыл бұрын

Hello from France, Awesome job ! Thanks you for sharing. I am new in this hobby but the Corsair is my best plane from far ! Maybe it is due to the "black sheep squadron" episodes ! All the Best.

@rebelsatcloudnine 4 жыл бұрын

Thank you kindly. I bought season 1 of the show a few years back and I agree I think seeing those real Corsair's flying are certainly and inspiration for building.

@robertsalanon2909 4 жыл бұрын

Un très beau résultat et une peinture de l·époque ,Félicitations ,,,A+

@rebelsatcloudnine 4 жыл бұрын

Thank you very much Robert :D

@Alantheleopard 4 жыл бұрын

Fabulous work, and I specially drooled at all the details on the cockpit (and shame on me that I have still failed to master the technique of making seatbelts and harnesses with that degree of accuracy) and engine. I have never been fond of the airbrush- it seems to me that it takes forever and that I age bad to have the surface primed or painted on when using airbrush, while the hand brush seems much quicker. Nonetheless I have to admit that there are duties for which the airbrush is the best if not only option, like panelling. 10/10 work, as always.

@rebelsatcloudnine 4 жыл бұрын

I know what you mean. Sometimes it's difficult to even get an airbrush to cooperate properly. That being said I do have a lot of fun using it.... at least when it's working properly.

@giuseppetrovato8863 4 жыл бұрын

Bellissimo modello

@BasicModelling 4 жыл бұрын

You are holding that metal object with a funnel on it... and paint appear on the plastic!? It must be magic... 13:24 ..aha, that's more like it!! Glad to see you have skills!! ;) And the end result?? Stunning.... :)

@Serg.Y.M. 4 жыл бұрын

Отличная работа мастера!!!

@AnthonyBrown12324 4 жыл бұрын

Another beauty . I don't go in for weathering myself but yours is so subtle ( like the subtle panel lines too . ) This kit is probably from the original 90s kits . What we were just saying ; probably still better than Airfix . I built the F4uD years ago the fit was excellent . The only thing I don't like ( which Airfix do do . ) is an easy option for flaps and undercarriage up .

@rebelsatcloudnine 4 жыл бұрын

Thank you again Anthony :D I'm really glad that people like the weathering I did on this, as I'm not a big fan of weathering, because I think I do too much. So I tried to create a more used version of the Corsair. I think this kit came out in 1996, and yes it still holds up. I don't usually like models with the folded wings in sections because they don't fit well when extended, but this was the first time I didn't have that as an issue. I think possibly because Tamiya doesn't really sell a separate stand for their models like Airfix, that they more or less assume that most modelers will want the gear down. That being said their larger 32nd scale kits are designed to be in flight or landed.

@AnthonyBrown12324 4 жыл бұрын

@@rebelsatcloudnine I just hang them on hooks with clear plastic wire ; underneath shelves to add storage space . I think I am more of a collector of aircraft ; than a modeller . So I like the clean lines of the aircraft . Models will never be truly realistic ; so it's a matter of taste ; how they look . Clearly some look better than others of course .

@andrew9545 4 жыл бұрын

Very nice build! What is that glue you use to assemble the fuselage halves? Is it thin cement or something else?

@ENB1968 3 жыл бұрын

Very nice build...fun to watch! One question: as you are applying the pinwash to the panel lines, what did you use to remove the excess - a swab or small paper towel piece? I find that it's almost as easy to remove the wash settling into the crevices as it is to remove the excess wash on the panels! Just wonder how you walk that tightrope.

@rebelsatcloudnine 3 жыл бұрын

I used a cotton swab dipped in some enamel thinner. One thing I do is leave the wash to dry for about 24 hours, this lets it harden and dry properly so that when I remove the excess the paint in the panel will stay.

@pierrebrosseau6558 4 жыл бұрын

Super build 1 question you are using primer on the exterior but not inside the cockpit any perticular reason

@rebelsatcloudnine 4 жыл бұрын

Only because I wasn't going to be handling the interior parts the same as the exterior. The exterior is opened to more abuse, and I wasn't totally sure how the Army Painter paint was going to react. But I'm pleased to report that it was strong.

@1942catman Жыл бұрын

I would really like to know what the blue colour is thanks

@MoonwalkerModels Жыл бұрын

Excellent build! I know this video is two years old. But I am curious as to where you picked up those army painter paints? Thanks 👍

@rebelsatcloudnine Жыл бұрын

Thank you very much :) I bought these at a comic book store not to far away from me. Army Painter are easily available online and since I made this video, they have come out with their own brand of airbrushing thinner. I haven't tested it out, but when I spoke to the company they said it has a special formula that has a sort of retarder mixed in.

@MoonwalkerModels Жыл бұрын

@@rebelsatcloudnine Thanks for the info and the reply! Kenny

@billbrowning3021 4 жыл бұрын

Just curious - why did you choose the Army Painter brand? That's one I've haven't tried to lay down through an airbrush. Worth trying? Great build of a classic kit.

@rebelsatcloudnine 4 жыл бұрын

I've been using their Primer and Anti-Shine Matt Varnish for a few years and I've been thinking for a while if I could airbrush with their paints, and things just fell into place and I tried it out here. They are very nice and easy to airbrush. I was very impressed with how thin I could get the paint, and it kept a good consistency. The coverage was great it never thinned out, like I've experienced with some Vallejo, and it dried quite hard. Honestly, I'd say give them a chance, there's a bit of learning curve to finding the right thinner to paint ratio, but I run into that every time I try out a new paint, but after that you're sailing :D

@PeteCourtier 4 жыл бұрын

Love it👍 I’ve saved loads on not buying canopy masks as you’ve taught me how to do it😀 Btw where did you buy those tiny stainless steel bowls you mix your washes in? Top work 🍺

@rebelsatcloudnine 4 жыл бұрын

I'm glad to hear that, I find it very satisfying to mask my own windows, but when I dod the Lancaster I nearly died haha. I can't remember, but I think they are called Mr. Paint Trays? They are made by Mr. Hobby and easy to get online like ebay.

@PeteCourtier 4 жыл бұрын

rebelsatcloudnine Thanks dude👍 stay safe🍺

@DrewsModels 4 жыл бұрын

Very nice build of my favorite WWII plane!! Inspiring video!!

@rebelsatcloudnine 4 жыл бұрын

I'm glad that you like it Drew, the Cosrair is a great looking aircraft. A bit tricky to assemble as a result of the design, but I think next time I'll have to try the 32nd Tamiya kit.