nice video . build another bikes bro

Suzuki GSXR 1300 R Hayabusa 1:12 Tamiya please!? Greetings from Marbella!

The Inner Nerd please build a Ducati 916 but custom as a 916 sps. That would be epic with your skills

Yes I realised this after I had done all that work. On the reference photo I was working to the light looked as though it was one piece of fairing, but turned out to be two sides and a nose. My next motorbike build will be a scratch build Cafe Racer based on the 748. Thanks for watching :)

The orange peel is in the colour not the clear coat, needs level thinners and a high grit sand between 2nd and 3rd colour coat

Thank you. Best of luck with your bike build and what a colour! I have a 916 to build sometime this year hopefully after a few more aircraft. Thanks for watching :)

Thank you and thanks for watching :)

Thank you. The brake lines are all standard from the kit but I remember they did need some persuasion to get onto the nodules they locate on. I think brute force is what worked for me in the end. Thanks for watching and I plane to make some more motorcycles in the future :)

Thank you I'm glad to hear you enjoyed the video! I'm not into maritime models in the shape of a battleship - far too many PE parts and mini pieces for my liking! I would consider a PT or Gun Boat of some sort however in the future if enough people wanted me to go away from the normal military aircraft theme :)

Thank you and thanks for watching :)

Thank you. Yes the music is a bit too much I know. I got for a more chilled vibe now and hopefully it's less stressful to watch :)

Thank you! Noted, I have a pretty special idea for one of those already 👍

Thank you! For the thinning of the surfacer I use Mr Color Self-Levelling thinner. It’s by far the best thinner I have used for lacquers. I thin roughly 50/50 so it lays on nice and smooth

Thank you and thanks for watching :)

Hello and thank you. The instructions do call out the colours, but I now tend to just look at a reference and go from there. As you build up a paint collection that's a luxury you can have. But most kits will have a colour callout in them if you're shirt on paints. Thanks for watching :)

Thank you. Cleaning out th airbrush completely isn't absolutely necessary. I try to work as efficiently as possible so that I maximise the colour that's is the cup at that given moment as well as plan work based on what colour is needed. So for this one I grouped parts that were silver, black and red so that I could spray each colour in one session, saves putting the colour in just to clean it out after one part. It's a given this isn't always going to work but it does save a lot of effort if you can group together the main colours of a build. Also I clean the airbrush just enough so that the colour isn't going to affect the next, only doing a full strip-down clean once I've done for the day or a few hours. I find it's not necessary to do a full strip down between colours, as long as there is no paint residue of the previous colour coming through once you're ready to start the next. Hope this helps, airbrushing is by far a quicker and more consistent way of painting a model so I highly advise you stick with it. There are also sonic cleaners which will help with the task of cleaning out your airbrush at the end of a session, getting to those areas you can't by any other means. www.amazon.co.uk/Uten-Ultrasonic-Cleaner-Cleaning-ultrasonic/dp/B08YJBB637/ref=sr_1_11?dchild=1&keywords=Sonic+Cleaner&qid=1625119873&sr=8-11

Thank you! And yes I know, but I was making a track bike copied from someones own converted road bike. Therefore it still has some road bike features and not s fully converted race bike, but thanks for the tip

@@TheInnerNerd Okay, all right. Everyone likes it. I used metal paint on my models for the exhaust systems, but I do not know the manufacturer, but they are super mixable, and they make nice metal titanium look. Good as you are But I did not build the model at a long distance. More like that .. Great hobby.

Спасибо и поправьте. Это было то место, где я использовал мои скрепки для рисования, чтобы удержать кусок во время рисования. Я забыл исправить это до того, как все прозрачные покрытия, поэтому было слишком поздно, чтобы исправить. Я знаю в следующий раз

@@TheInnerNerd да,над передним колесом и под ветровым стеклом... то место белым покрашено...

Thank you. The boggest difference for me as I usually make aircraft is the surface prep. Back and to with the primer to get rid of any blemishes. Also test fit and make as many sub assemblies as possible to paint. Hope this helps and thanks for watching :)

Thank you and thanks for watching :)

Thank you and thanks for watching :)

Thank you! I hope your build goes well, I really fancy doing a 916 also as that has got to be my favourite bike!! And welcome to modelling. If you have any questions just let me know in the comments and I'll do my best to answer them for you. For commision builds for Cars and Motorcycles please contact the.inner.nerdYT@gmail.com

Honestly, juts go for it. If you'd like to know more about what to buy first off then just let me know and I can give you a few pointers so you don't go wasting your money :)

Lucky number 7 it seems!

Not on the track bike version. The cowling on the front is one piece going from the picture I copied to make this scheme :) Thanks for watching :)

@@TheInnerNerd Think u are wrong I remembering seeing that bike in real life and it had definatly a seam ! Search 1993 falappa Giancarlo police duc and on the pictures u will see the seam aswell . Nonetheless fantastic job on the model !

Dafuq do you want 'em to use?! You have to be able to screw 'em in!

@@maximusmax4557 magnets

Dunlop?

MICHELIN?

Clearly Michelin.

Yes this is possible. From a rattle can you may find it hard to apply as light a coat as you can with an airbrush and the primer itself can be a little think too compared with the control you'll get from using something like Mr Surfacer. But if you're not too particular about such then yes, go ahead :)

I use a Harder & Steenbeck Evo Silverline with 0.2mm needle. The working pressure I use is 15psi and the paint is thinned sufficiently not to spatter or create lumps that spit out of the brush when spraying. If you are having trouble with flow it is most likely be one of two things since you are spraying at such a high pressure. 1 - The paint is too thick. On this model I used Zero Paints which is pre-thinned ready for airbrush use. But if you are spraying Tamiya acrylics for example they will need to be thinned with Tamiya X-20A or Mr Color Self Levelling Thinner. One trick is to get a brnad new pot of paint and add enough thinner so that the bottle fills up tp the neck of the jar. This si then typically ready for use through an airbrush straight from the pot in the future. 2 - The airbrush is clogged. Ensure you have the correct thinners for the type of paint you are using. Using the incorrect thinners can cause some paints to become like jelly or not thin them at all which can cause flow issues. Make sure you clean your airbrush thoroughly after each session as dried paint can form and collect in teh nozzle which will eventually cause the airbrush to clog completely. I find putting the airbrush in an ultrasonic cleaner for around 4 mins after each airbrushign session keeps it clean and in perfect serviceable condition. If you don't have access to one of these then I suld suggest a full strip down and clean with the appropriate thinner and cotton buds. An airbrush is made from stainless steel and should be easy to keep spotless even in the coour cut if cleaned after every use. In effect they should last forever if you're taking care if it. One final additional factor could be that the needle is damaged. A bent needle tip could be blocking the gap on your nozzle and restricting the flow so be sure to check this too. If you let me know if this heps and what type of paints you use with what thinners I'm sure we can get to the bottom of your issue. Many thanks and good luck The Inner Nerd

@@TheInnerNerd I use Tamiya paints and thinner. The airbrush is a HSeng. It's new, and very clean. I think it's a setup problem more than anything else. The airbrush didn't come with any instructions on settings for it, so it's sort of a hit and miss atm.

Ahh okay. Hard to pin point what is wrong exactly then other than your air pressure seems a but high compared to what I'm used to working on.

@@TheInnerNerd I tried running it at lower pressure (15), it didn't seem to work as well. I think the problem was too much thinner. I'm not sure on what the right ratio is to paint to thinner and clear to thinner. I read somewhere, take a full pot of paint and fill it with thinner n it'd be about right. It improved it, but it's still comes out very thin.

Thank you. Unfortunately I cannot change it now it's uploaded but I now use a less dramatic soundtrack to the videos and gone for more clam and classical. I find it difficult to get enough calm music that is still engaging to watch and builds as the model gets more complete

@@TheInnerNerd i think that any kind of chillout music will do, Vanilla for example, no voice just nice sound. Good luck and i wait for more uploads!

Baloney! This music was MUCH better than the EDM/techno pop/dream pop garbage everyone else puts on their videos. I actually *listened* to this video while I watched it. Kudos, Nerd!

@@maximusmax4557 to each it s own

@@TheInnerNerd Try Mozart or Vivaldi, Mr Nerd.