@elodiegarrandes9450 2 жыл бұрын
Merci beaucoup, les vidéos sont très bien faites. 😀
@robbrennanrc 2 жыл бұрын
You are very welcome my friend. tu es le bienvenu mon ami
@catcancrunch7260 2 жыл бұрын
Ok so I wondered why I was having steering issues??? Then after watching you put a second lot of bearings on before attaching wheel hubs I referred back to the manual and guess what I didn’t do??? And then looking back in box saw four spare bearings 😡😡😡 what a stupid rush arse I am !!! We live and I certainly learn from Mr Rob !!! I bet when I run my tt02b it suddenly won’t have steering issues lol Thanks for your uploads from the 54 yr old half wit …
@robbrennanrc 2 жыл бұрын
Hi Cat. I did exactly the same thing when building my DF-02 Aero Avante. The problem though was I was with Mark and Alf when we discovered the issue lol. But on the plus side I bet you will never do that again lol. Many thanks and all the best my friend.
@catcancrunch7260 2 жыл бұрын
I definitely won’t mate lol and would you believe it after putting in bearings it is still pulling to the right under acceleration??? Back to the drawing board 😡
@MavAuto-Pete 3 жыл бұрын
Core 9016 servo hpi 15t, 20t pinion 65t high speed gear, waterproof hobbywing esc is just some of the setup with mine and I've painted the underside of the spoiler matte black along with the inside of the body as well and it's come up with quite good results. I'll see what I can do about a video. I'll kept the driveshafts standard for now along with the abs but I've put a Tamiya shaft Tamiya connectors to the gearboxes.
@mikeymike3240 4 жыл бұрын
Hi Rob, niiiiiiice build vid. Yeah, have to agree, slightly heavier oil, and heavier rear springs. Keep the pre load to a minimum. That’s a funny looking word lol 😂. 😎👍👍👍🇬🇧
@robbrennanrc 4 жыл бұрын
Cheers Mikey. Although it's soft it still looks to handle really well. But I am going to try some longer springs I found off my Lunchbox to see what they do.
@madsrcbuggy 4 жыл бұрын
I got a couple days of crap weather, so I think I'll start assemble mine today and then probably paint the body in the weekend... Your videos definitely make me want to get started!
@robbrennanrc 4 жыл бұрын
Go for it. Hope it goes/went well.
@madsrcbuggy 4 жыл бұрын
Mechanically complete, 2 short evenings of assembly, was fun, now some paintwork over the weekend, hope to take it for a run Sunday! :D
@Remoteaddicted 4 жыл бұрын
Nice build Rob! I'm so looking forward to the plasma run! Have a great weekend 👍
@robbrennanrc 4 жыл бұрын
Cheers Charlie. At least with the body painted it didn't take too long to complete hehe.
@hellion1770 3 жыл бұрын
The spacers Do not stiffen the spring they Just change ride hight Need to change the springs of you want stiffer.
@ShenRC 4 жыл бұрын
👍 Looks nice! Should be a good ripper! maybe some heavier weight oil in the rear shocks?
@robbrennanrc 4 жыл бұрын
Cheers Steve. They already have the thickest oil I have 1100CST so I may have a look to see if I have another springs that will fit and try them, but honestly after running it it handles the rough ground of our overgrown track very well.
@CarminesRCTipsandTricks 4 жыл бұрын
Well done Mate!! Chassis finished! 👌👍👍💯 With regard to Servo Savers.... NEVER use them. Except for the Kimborough Servo Savers. The Tamiya ones especially, are the biggest source of SLOP!! However - on Buggies, I reckon it's absolutely necessary, because the Front Wheels are SO exposed. If you have it, I'd strongly recommend either 800 or 900wt Oil in the Rear Shocks... I'm surprised that Tamiya actually included Springs that are too SOFT. Typically they're WAY TOO stiff! Did you feel odd, fitting Tyres in that manner?? 😲 I understand that you're following the Manual for the benefit of the less experienced, but it just looked ODD. 😜 Also, I've been remiss in mentioning, I like the Industrial sound effects when you're working!! Clever and humourous! I like to bring that stuff up, because it's part of the work we put into our Videos.... I just designed an entirely new Intro on my last Video, that absolutely NOBODY noticed! 😲😞 I guess it's OK, I'm happier that some People mentioned the Song that I wrote for my Denise.... It was melancholy, and also a risk to include a Ballad.... So the Body... The Windows were Painted OVER by Tamiya, right? 😖 Were you planning on doing anything about it, or just fitting black Window Decals and calling it a Day?? It should look good regardless. Cheers 🍻 Mate, and stay SAFE! 😷 Carmine ✈🚂🚙
@CarminesRCTipsandTricks 4 жыл бұрын
BTW (and I seem to have too much to say today!!), on my TT-02, I've decided on a different direction. It will be going full stop, On-Road Car!! A Friend is sending me a Yeah Racing Aluminum Ball Raced Steering Bellcrank Kit!!! That somehow has changed my mind from building it as a Buggy! Although next year, I'm planning on getting a TT-02B, and doing it RIGHT!! 😊
@robbrennanrc 4 жыл бұрын
Thanks Carmine. I must admit I don't like these Tamiya black ones at all but have no choice at the moment. The front has 900 and the rear 1100. Just found some longer springs off my Lunchbox so have stuck them on see what happens. IT wasn't too bad as I've done it before especially on buggy wheels. When I got into RC I got blisters on my thumbs when fitting the Thunder Dragon tyres (the rubber was so hard hehe) Those came with my editing software so thought it would be a change from music, glad you liked it hehe. Yes really liked it but didn't notice on the first one as honestly I was rather distracted by having to sort out my crashed YT disk, almost lost 1.2TB of videos but I think I have restored them now. Yep the body was pre-cut and painted. I might look at cutting them out at some point but don't have any spare drivers at the moment so window stickers it is for now. That is cool watched your vid earlier. Here's hoping you can get a body and a new chassis sooner rather than later. All the best mate.
@MarkBryanRC 4 жыл бұрын
Great work, Rob! Good to see the chassis completed! This video is nice and bright, have you got some new lights? Very easy to see what's going on. Another detailed and informative build my mate, good you left the cock-up in - we all make 'em! Thumbs up and hope to see ya soon dude! :))
@robbrennanrc 4 жыл бұрын
Hay dude. Cheers mate. No new lights, think I must have remembered to brighten it in the editor hehe. Yeah and at least it didn't take too long to correct. Maybe get together over the weekend (as well still seem to be able to meet up outside in public places)
@rcdays2595 4 жыл бұрын
Same thing happened to me. After completed I noticed the rear suspension was too soft. I added some spacers but in the future I will change to thicker oil.
@robbrennanrc 4 жыл бұрын
Thanks for comment bro. Mine was still soft but I have just found a couple of springs off my Lunchbox. They are longer but I'm going to give them a try.
@MavAuto-Pete 3 жыл бұрын
I put 1000 oil from ftx in and it's nice and firm but it's a good balance.
@rcdays2595 3 жыл бұрын
@@MavAuto-Pete Yes I will eventually change to thicker oil but at the time I had just assembled the dampers and did not have thicker oil available.
@MavAuto-Pete 3 жыл бұрын
@@rcdays2595 I've found still by using the 1000 oil I've also had to put the medium spacers on and it's just right
@fencenaoghen3569 4 жыл бұрын
Hi, Rob! And thank you for that video. It’s always so nice to follow your builds. I agree with you on the motor cover. For the tires, you didn’t want to add foam? I know he doesn’t have any in the kit but I was thinking that the tensile effect might be more important with a foam inside. I can’t wait to see your work with the body, this TT-02B looks like he’s keeping his promises. I hope you’re all right. Keep up the good work. Take care mon ami.
@robbrennanrc 4 жыл бұрын
Your are very welcome Alex. The problem at the moment is finding parts in stock, but I do have several buggies that run fine without foam so don't normally add them as an upgrade. Just need to add the stickers on the body so it was a lot quicker. I may at some point though consider cutting out the windows so I can install a driver. Many thanks for following the series mon ami and have a great weekend.
@fencenaoghen3569 4 жыл бұрын
@@robbrennanrc Yes install a driver in this buggy ! This is the Rob's touch we love !
@Skyde67 4 жыл бұрын
What servo did you use? Trying to figure out what would work best for my kit
@robbrennanrc 4 жыл бұрын
Hi. It was a Turnigy TGY-1501MG 15.5Kg metal gear. Hope this helps.
@Skyde67 3 жыл бұрын
It does! I'm thinking of upgrading at some point because I'm using a servo I had laying around from another car. Might see how it performs but im new to the hobby 😄 thank you!
Fabiosa Best Lifehacks
Рет қаралды 29 МЛН
Addam's Playground
Рет қаралды 8 М.
Fabiosa Best Lifehacks
Рет қаралды 29 МЛН