I think we need a “it might go pop!” T shirt making 😂
@TAMIYALegends4 жыл бұрын
Chris Wizz Pmsl love it 😂👊🏻
@duffduff49484 жыл бұрын
That was fantastic! and quote of the month 'we're gonna need a bigger road' :) loving it
@TAMIYALegends4 жыл бұрын
duff duff Pmsl 😂👊🏻 Love it 😊
@markhollinshead57954 жыл бұрын
great comparison series thank you glen
@TAMIYALegends4 жыл бұрын
Mark Hollinshead Thanks Mark 😊👊🏻
@TheTobyT4 жыл бұрын
Following this speed series is very enjoyable, and I've been eagerly awaiting each instalment! 84 km/h so far - wow!! All the best, Toby
@TAMIYALegends4 жыл бұрын
zombiethon Thanks Toby, plenty more speed on the way my friend 🤩👊🏻
@Aro8004 жыл бұрын
Thanks , another great video! Can't believe these little cars can go so quick. I thought my technitune was quick back in the day. Thanks again. Love your work.
@TAMIYALegends4 жыл бұрын
Aro800 Thank you 😊😊😊
@tigers91224 жыл бұрын
Please keep up the great channel awesome video once again 👍👍
@TAMIYALegends4 жыл бұрын
god dam The channel will keep going my friend, it’ll just be less videos from next month but still one a week 👊🏻
@DustyFingersRC4 жыл бұрын
Another great video. Always interesting stuff.
@TAMIYALegends4 жыл бұрын
DustyFingers Thank you 😊😊😊
@Leonsrchobbys4 жыл бұрын
what a fantastic run Glenn mate looking forward to the next one😎😊👊👍🇬🇧
@TAMIYALegends4 жыл бұрын
Leons rc hobbys Cheers Leon 😊👊🏻
@ericwood27904 жыл бұрын
It looked pretty fast to me Glenn , nice job ! Keep up the good work, I’ve learned some new tricks watching your videos. Thanks
@TAMIYALegends4 жыл бұрын
Eric Wood Thanks Eric 😎👊🏻
@Zeros_Hobbies4 жыл бұрын
Im still waiting for some tamiya legands T shirts. Glenn take all the time you need buddy but dont give up on the channel brotha you are a legend.
@TAMIYALegends4 жыл бұрын
ZERO'S HOBBIES Thanks Jon 😊👊🏻
@svenmaier24024 жыл бұрын
As usual: perfect run! Thanks for sharing!
@TAMIYALegends4 жыл бұрын
Sven Maier Thanks Sven 😊👊🏻
@mattmclafferty62654 жыл бұрын
Wicked Mate! Thanks. Gauranga :)
@TAMIYALegends4 жыл бұрын
Matt McLafferty Thanks Matt 😎👊🏻
@davepearce63594 жыл бұрын
Hey Glenn. That’s amazing. Really great to watch and such great speed. Brilliant. ☺️👍🏻
@TAMIYALegends4 жыл бұрын
Dave Pearce Thanks Dace 😊👊🏻
@RCHobbyShed4 жыл бұрын
That's going great on 3s. Maybe some foam tyres might have more traction on that surface. I found my old TA-04 was a lot more driveable on asphalt after changing from rubber slicks to foams. Goes great though! 👌👍
@AB-80X4 жыл бұрын
Hard foam tyres for the speed runs on this is definitely way to go.
@TAMIYALegends4 жыл бұрын
RC Hobby Shed Thanks Mick, and yes I completely agree with your comment on Facebook about me being tired. You’re absolutely spot on my friend. I lost track of why I’m doing this, well actually doing it for the wrong reasons now. The content will slow down dramatically from next month onwards 👊🏻
@RCHobbyShed4 жыл бұрын
@@TAMIYALegends Rest up mate. The frequency of your videos each week is a huge amount of work, especially doing them in the detail you do. I say just cruise and do it at your own leisure. Take it easy mate! 👍
@bluesimon13ify4 жыл бұрын
That's good going,😀😀😀
@TAMIYALegends4 жыл бұрын
bluesimon13ify Thanks for watching buddy 😊👊🏻
@paulus8420004 жыл бұрын
Absolutely brilliant video! Can't wait to see the next video. Shame it's not a bit warmer weather to up the performance.
@TAMIYALegends4 жыл бұрын
paulus842000 Excellent thanks for watching buddy 🤩👊🏻
@thecretanbull47844 жыл бұрын
Good morning Glen!! That was very entertaining! I wish I can help you or offer some advice but I only stick with sport tuned motors. Just getting my feet wet again because of your channel. Not brave enough yet. Keep up the awesome videos. Loving it! Thanks
@TAMIYALegends4 жыл бұрын
chris venianakis Excellent Chris 🤩 Thanks for watching buddy 👊🏻
@paulsrc21954 жыл бұрын
Brilliant stuff so much fun to watch
@StewMac5704 жыл бұрын
Noice! TAMIYA POWER!!
@TAMIYALegends4 жыл бұрын
Stew- Mac Cheers Stew 😎👊🏻
@adrianharrison52084 жыл бұрын
that next motor you are about to try is the one I used to have in my lunchbox, took it out and sold it on as it was just too much for it.. to be honest I was not expecting that Tamiya brushless to go any better so glad to see it did.. sounds better also
@TAMIYALegends4 жыл бұрын
adrian harrison Yeah the next cheap combo 4370kv is a big jump up in mph 😎🚗💨💨💨
@adrianharrison52084 жыл бұрын
Glen its going to fly :)
@mitchbek4 жыл бұрын
Nice run bro thats seriously quick
@TAMIYALegends4 жыл бұрын
Bearded Tech It’s going to get much quicker yet my friend 😎👊🏻
@mitchbek4 жыл бұрын
@@TAMIYALegends wow serious that awesome cant wait to see it!!!
@RCACTIONAUSTRALIA4 жыл бұрын
Looks like a Top performer 😎👍🏻
@TAMIYALegends4 жыл бұрын
RC Action Australia It’s got plenty to come yet 😎🚗💨💨💨
@rcalltypes82304 жыл бұрын
Makes for some interesting footage, high speed with only rear brakes. Next, Glenn will say “ I should have fitted the front diff” well maybe. Anyway it’s fun to see. 👍🏻😎
@TAMIYALegends4 жыл бұрын
Rcalltypes Lol 😂 yep 😬
@slebdad4 жыл бұрын
Always seems to jump up speed with brushless! Still loving this motor test series!
@TAMIYALegends4 жыл бұрын
slebdad Thanks for watching buddy 😊👊🏻
@patricksadler35874 жыл бұрын
Love it I have that setup in my buggy I know it’s fast it’s good to know just how fast cheers 🍻👍
@TAMIYALegends4 жыл бұрын
Patrick Sadler Thanks Patrick 😎👊🏻
@Mini-z19944 жыл бұрын
Really need too swap out that front one way diff too a 2nd rear diff or if possible buy another ball diff so you can actually stop with all 4 wheels instead of essentially pulling the handbrake too slow down with. (Usually for very grippy surfaces you want the rear tires too brake like racing indoors on carpet kind of stuff or with an esc you can adjust the brake force on quite a bit or if you are making a drift car essentially, it helps throwing it around the corners.
@toulee80513 жыл бұрын
Or just delete front diff all together, and roll like real NSX - REAR WHEEL DRIVE
@paulgarwood1924 жыл бұрын
Getting closer to the ton! The 5750kv will be insane. I like Mick’s suggestion foam tyres, should grip better, but when you hit the brakes that might tear them to shreds. I’ve never used them on 1/10th asphalt so I am only guessing. 👍🤓🇦🇺
@TAMIYALegends4 жыл бұрын
Paul Garwood Yes we actually get passed the ton soon 🤩
@nickrobertson24504 жыл бұрын
Nice! Its awesome youre doing this, mate, as I have a TB04 & TA06 both NIB still yet to build & don't yet know how best to chose a gearing, motor, esc set up for them. But 3s Lipo on the tble02? Wow! Spec in manual says like 7.2V max! I am amazed that it isn't tripping its safety cut offs & here's why... I run my Blitzer Beetle with the tble02 hooked up to a 13.5T Speed Passion & a 4000mAh 7 cell 8.4V nimh (specially made off center hump pack to fit the strap) & use the bigger of the 2 pinions available in the gearbox (15 tooth?). Now I must be pushing it pretty hard, it runs good & never cuts out, but... The tble02 will NOT pull the Speed Passion 10.5T I have on the 7 cell bomb, as it just trips the safety cut off (current draw or temperature?). Now my multimeter tells me the voltage of the pack is over 10V straight off charge, & obviously the BB has got much bigger wheels than the TA05 so I don't know how the ratios compare. But that's still quite impressive it ran so well without tripping. Maybe the cold weather is helping after all! Awesome!
@nickrobertson24504 жыл бұрын
7 cell bomb? Lol. 7 cell nimh. Damn autocorrect.
@TAMIYALegends4 жыл бұрын
Nick Robertson Yeah it’s definitely not to be recommended Nick that’s for sure 😬😬😬
@TomleyRC4 жыл бұрын
You know when you have reached the peak of speed for these when you have to go retrieve them lol, I lost signal on my old TA03R at about 60mph.... that didn't end well!
@AB-80X4 жыл бұрын
Which tx do you use?
@TAMIYALegends4 жыл бұрын
Tomley RC Lol Phil absolutely spot on 😂👊🏻
@earltaisenchoy3764 жыл бұрын
Great video Glen, I've really enjoyed following this project. I do hope the ruma that you're gong to stop doing videos isn't true.
@TAMIYALegends4 жыл бұрын
Earl Tai Sen Choy I’m just slowing down from next month Earl, the channel will continue just not with 3-4 per week my friend 😊👊🏻
@earltaisenchoy3764 жыл бұрын
@@TAMIYALegends Excellent! I totally understand that you need a break. So many of us have depended on you for our 'fix' over the past few months. Thank you so much for all your hard work!
@MavAuto-Pete3 жыл бұрын
I think for reading a few people don't get on well with the Tamiya electronic speed controller because it just keeps cutting out after about 8 to 10 minutes. The BZ Superstock is very fast at 36 mph on 2s
@r35553h4 жыл бұрын
Hi Glenn, you need some 20R radial tires to get some grip on cold days. Speedmind mounted should be good and the dish wheels should help with aero as well
@TAMIYALegends4 жыл бұрын
rese banget Excellent thanks buddy 😊👊🏻
@aviano724 жыл бұрын
You're like like Clarkson now: More powerrrrr !!
@AB-80X4 жыл бұрын
If you want to calculate loaded rpm, use 3.6 volt rather than 3.7v. If you want to get nuts, give the new TP Power 3630CM 7000kv motor a try. It's 3S rated and physically a 3658 size can... A real beast of a 540 style motor.
@TAMIYALegends4 жыл бұрын
ABOlsen80X Wow excellent thanks for the information buddy 😊👊🏻
@RichardE30463 жыл бұрын
In my opinion the Sport tuned is for the purpose of more speed the most buck for the money. They are not that expensive and fine to run on the tble 02s wich come with most cars. And you keep everything in one piece.
@druscanam Жыл бұрын
I'd recommend when running on the street run a tyre with a tread pattern instead of full slicks. Makes alot of different when it comes to grip and stability.
@paulsrc21954 жыл бұрын
As Marcus says adjust the drag brake on the ESC to help pulling the car up Also try to find a spool for the front give you a little weight saving over a diff
@TAMIYALegends4 жыл бұрын
Paul's RC Thanks buddy 😎👊🏻
@martynbutterfield7316 Жыл бұрын
Hi Glen Top video love watching all your tamiya legends videos. Im in the process of building a tamiya TT02 type s with a few upgrades and cant decide on a body shell for it though? What shell is fitted to this car please as looks really cool 👍👌
@alexr1292 жыл бұрын
how things have changed i used to have the sprint motor back the day with a black can and red end bell and the endurance one with the blue end bell they were fast back then ... but didnt last too long when all you could have was a 1250 battery pack ha ha
@hotdognobun4 жыл бұрын
I miss the mechanical speed controller on my Hornet/grasshopper. Remember the battery door on bottom coming loose with the heavy hump pack battery?
@TAMIYALegends4 жыл бұрын
hotdognobun Oh yes I remember that 😂👊🏻
@AB-80X4 жыл бұрын
Good stuff. Did you see the link I sent you in the vid with the Durga regarding the hexes to get your wheels on?:)
@TAMIYALegends4 жыл бұрын
ABOlsen80X Yes I did thank you for that 😊👊🏻
@Freddie44utube4 жыл бұрын
Couple of plastic spacers and fit the protection bar (you rebel) To switch reverse on/off simply fire up speedo holding button then release when LED is on red. Didn’t know you could run a TBLE02S on 3s did it survive
@TAMIYALegends4 жыл бұрын
Neil Fastfreddie Anderson Yeah I’ve ran a few now on 3s mainly on a 540 though, but haven’t had one go bang yet lol 😂
@Freddie44utube4 жыл бұрын
TAMIYA Legends that’s interesting to know it clearly states 2s but I’ll give it a try
@flashtu4 жыл бұрын
Got the same problem i use now the flysky gt5 transmitter and the receiver with build in gyro now it drive like on rails at high speed:)
@badaboom494 жыл бұрын
Forgive me for asking an unrelated question, but did you prefer the DT-01 chassis with the Mad Bull tires or the Stadium Blitzer tires? Never been into the 2wd cars, but your Rookie Rabbit Mad Bull made me order one. 😁
@TAMIYALegends4 жыл бұрын
badaboom49 100% with the Stadium tyres fitted 😊👊🏻
@badaboom494 жыл бұрын
Thanks buddy, sounds good!
@wayneyates52564 жыл бұрын
Great run, will we see 60mph? I'm running a ta04 with a skyrc cheetah 8.5t 83 spur 46 pinion(48pitch) and on 2s I get 50.6mph with foams on front and rubbers on rear. However when I run my Hpi sprint with the same spec it hits 53.9mph.. But they both r insane with 3s as couldn't get it to stay straight lol. Looking forward to seeing the next vid 👍👍👍👍
@TAMIYALegends4 жыл бұрын
Wayne Yates Yes we see 60+ mph 😊😊😊
@dmfman1234 жыл бұрын
Brill vid 👍🏻 my hotshot has the same set up ( apart from drive pinion size) and is rapid. I didn’t think the Esc could handle lipo as no cut off. Is 2s safe on this esc in your opinion ? Thanks, keep up good work 👍🏻
@bunjy8144 жыл бұрын
ESC's don't "need" a cut-off to be lipo safe; they just need to be able to handle the voltage and current output of the battery. The lipo cut-off setting is to prevent permanent damage to the battery from over-discharging. Just make sure to stop running when the car slows considerably and/or use an external voltage monitoring/warning device and you should be fine. I've been doing this for years and have had no issues.
@dmfman1234 жыл бұрын
bunjy814 ahh thankyou very much bunjy 👍🏻
@DrDiff952 Жыл бұрын
6 cell NiMh and 2 S LiPo have the same voltage. The difference is run time. If you want a real difference use a 3S LiPo
@mitymike4 жыл бұрын
I know it won't make much of a difference but I think you need to retest the RZ motor with new bearings instead of the old ones you pulled from the acto-power motor. I was just wondering if it would help it's top end significantly or not. 🤓
@TAMIYALegends4 жыл бұрын
mitymike 1996 Wow that’s a great shout, I’d actually forgotten they were old used bearings 🤔
@peterrenaud96394 жыл бұрын
I laughed out loud at all that panting! Great job, thanks Glenn. How were the cars temps after the 3s? Do you think that speedo will hold using only 3s? Do you have any plans to do any videos at a local track?
@TAMIYALegends4 жыл бұрын
Peter Renaud It was barley warm tbh, but literally only in the car for a couple of minutes. I’ve run 3s before a couple of times with the TBLE02s in 540 motors and haven’t had one go bang yet 😬 Unfortunately no indoor or outdoor tracks even remotely close to me Peter 😭😭😭
@peterrenaud96394 жыл бұрын
@@TAMIYALegends the barnyard in Perth doesn't look that far?? It's not that fancy, but still looks like a good time. I am hoping to go colasanti's in kingsville this summer, about 30 minutes from my house. Pretty sure there won't be any other Tamiyas there, but I don't care. Thanks again!
@Gene_the_OG_Raver4 жыл бұрын
Thats slower than Stock Mabuchi Can Motor
@darkiee694 жыл бұрын
Huh?? The stock motor was the first one he ran, and it's the slowest one yet.
@Mini-z19944 жыл бұрын
Wut ? the 10.5t motor did 64 km/h though on top speed running 2s which is faster then the stock 540 on 3s lipo. + The tbl02s is not exactly the greatest brushless sensored esc as it's very conservative on timings for less heat & more runtime which gives less of a punch under acceleration if that's what you are wondering about.
@paulobumaye64254 жыл бұрын
You what mate? Somebody hasn't followed the series.
@tonyallen86264 жыл бұрын
Did you have to calibrate your radio to your ESC if not some time's it doesn't hurt to re do it, turn your end points and dual rates to 100% before hand that mite give a bit more speed every little help's
@TAMIYALegends4 жыл бұрын
Tony Allen Yes it was a new speedo and comes set for brushed motors I believe 🤔. So yes had to do the full setup procedure 😎👊🏻
@gaz19674 жыл бұрын
Great run Glenn, how's the car holding up. Are you having to tweak the car.
@TAMIYALegends4 жыл бұрын
Gary Rawlins Tbh I haven’t had to touch it which really surprised me Gary, this is such a great chassis 😎👊🏻
@cm6gaming2594 жыл бұрын
This might be a reach of a request, but will you be able to compare the Traxxas Titan 12T 550 brushed motor, Arrma Mega 15T 550 brushed motor vs both of the Tamiya Super Stock brushed motors? PLEASE????????????
@TAMIYALegends4 жыл бұрын
Jason Giles Unfortunately there motors I don’t have, maybe in the future 😊👊🏻
@crnkin24 жыл бұрын
Any chances of measuring the motor/esc temps Glenn?
@TAMIYALegends4 жыл бұрын
crnkin2 There barley getting warm given the outside temperature and the actual amount of run time 🤷🏼♂️
@1114mat4 жыл бұрын
Could you Recommend the tamiya ESC and servo, coz I just brought my first two tamiya buggy’s bigwig (Marmite)😂and a top force.
@r35553h4 жыл бұрын
1114mat the TBLE-02s maxed out at 23T brushed and 8.5T brushless. If you have the newer bigwig re-re, the stock motor is equivalent of BZ motor. The ESC would not be able to handle Technigold or Dynatech 01R or Dynatech 02H. If you have an older motor, it is best to get some old LRP ESc or some tekin brushed instead. For servo, any newer metal gear servo will work. Please keep inmind that the Bigwig has the Rack and Pinion Steering not the regular setup
@Mini-z19944 жыл бұрын
The kits should come with an esc in the box tbl02s & a standard 540 motor, you'll need a radio, receiver, servo, paint (i think for the top force at least.) battery & charger. It's all fairly standard these days for everything unless it's micro sized uses Futaba plugs with 3 wires. Or mentions it's non standard in any other way. Like say a sensored brushless motor or non sensored brushless motor doesn't always work with every esc out there if it doesn't meet the specs of being able too manage a say 5.5t sensored brushless motor on an esc that has 8.5t as the top end brushless motor limit it will certainly fail after a bit if it doesn't manage too shut down while overheating. If you are just going too be running these buggies about outside & not on a track & don't want too buy a new radio for every kit I'd recommend flysky's gt3c (Can bind up too 10 different receivers & can just switch between them on the radio pretty much.) If you don't mind multiple radios on the shelf the flysky gt2e works fine or any of their similar radios. Specially if you don't do any racing on the track at all really. bunch of different models here too check out. www.flysky-cn.com/car-1 Could ofc just buy one radio & a spare receiever & bind too one car every time you go for a drive with one of the two or have it attached too the car via velcro & just move over the receiver too the other buggy when you want too drive the other one. Planning too run higher end brushless power similar too the video ? I'd look at hobbywings sensored trackstar esc & motors they are pretty good quality wise, on par if not much better then tamiya's esc's, motors im not sure there is a whole lot of difference performance wise other then the trackstar motors perhaps having more adjustability on the motor timing as well. Can buy those on for example hobbyking.com or similar sites. If you want too keep it cheap though you can stick with the tbl02s esc & get a sensored motor for that included esc (down too 10.5t i believe which is fairly decent speed wise as you can see in the video here with a tall gearing, specially on 2s lipo with the motor timing turned up a bit.) If you need a stronger esc for some modified brushed motors like say a 15t 540 motor or a vintage motor of some sort with similar specs or lipo batteries I'd go with a hobbywing 1060 for sure. Down too 15t brushed motors on 3s lipo is pretty quick if not faster then what you've seen in the video here as long as the gear ratio is balanced somewhat. & 12t brushed motors on 2s lipo which is also quite fast. You can run 2s lipo batteries in the tble02s voltage wise but you'll need an external low voltage alarm of some sort so you know when too stop running the car before the battery starts taking damage from running too empty beyond it's safe cutoff voltage limits.
@1114mat4 жыл бұрын
Marcus60661 yeah, no esc in the box
@1114mat4 жыл бұрын
Marcus60661 thanks for your advice
@1114mat4 жыл бұрын
rese banget what Servo would be best for the Rack and pinion ?
@sitmark4 жыл бұрын
HI Glenn, you would not really need to adjust the timing on a brushless sensored motor with a proper ESC that can program the timing. i can do 2s 85Km/h easy with a 10.5T brushles with an hobbywing xrun esc boost and timing configured. you would be amazed with a programmable esc. I don't know if tamiya even makes that kind of ESC
@TAMIYALegends4 жыл бұрын
Steven Peirsman I’m not sure Tamiya did one 🤔🤷🏼♂️
@AndrewMurphy83833 жыл бұрын
the issues is that you still need to let off sooner than you are
@davidshort9522 жыл бұрын
I’ve not been able to run my xvo1 with the rz motor on the tbleo2s speed controller on 2s lipo as it just keeps overheating !!! Any advice ?
@TAMIYALegends2 жыл бұрын
Yeah it needs the Tamiya optional fan on the ESC unfortunately 😅👊🏻
@ChrisLee-UK4 жыл бұрын
If you go much faster, you're gonna have Elon Musk knocking on your door for ideas Glenn haha. Rapid AF! Hope you're well buddy
@TAMIYALegends4 жыл бұрын
Chris Lee - UK Pmsl 😂 Chris 😂
@rixsta9113 жыл бұрын
Esc limits the motor. Better off with a sensored hobbywing esc. The difference is massive.
@jamescunliffe98724 жыл бұрын
Looking at what's coming an aero undertray might be good with a front splitter/bumper to protect the body a bit and to smooth the airflow?:)
@bradkalman23534 жыл бұрын
There is a tz motor and a dirt tuned motor and gt tuned motor.
@kometkamerat4 жыл бұрын
Drag brake setting on the ESC?
@TAMIYALegends4 жыл бұрын
Kometkamerat Don’t think so on the TBLE02s 🤔🤷🏼♂️
@kometkamerat4 жыл бұрын
@@TAMIYALegends Called Neutral brake in the manual: www.tamiyausa.com/media/files/45057ml-801-efb9.pdf
@ryainestudios01284 жыл бұрын
You can adjust the nuetral brake if your using Tamiya brushless motor with TBLE02s
@honokami-sama84624 жыл бұрын
Time to break 100kph
@TAMIYALegends4 жыл бұрын
Honokami-sama Oh yes 😎🚗💨💨💨
@MavAuto-Pete3 жыл бұрын
I know the car is a Honda NSX but is it an actual Tamiya?
@andymerk6017 Жыл бұрын
with a gool rc setup in my tto1e it'll run 50 even on a 3s . maybe time for a new chassis LOL
@yvessehnaoui35324 жыл бұрын
Nice body would look much nicer with some smoke ps paint on windows try it
@TAMIYALegends4 жыл бұрын
yves sehnaoui Once I’ve finished the speed runs with it, I’m fitting a Tamiya cockpit into it 🤩👊🏻
@schuttrostig57294 жыл бұрын
No, dont start smoking bad for your health
@shaunkoger45504 жыл бұрын
What’s the diff set up?
@TAMIYALegends4 жыл бұрын
Shaun Koger Real diff, front one way spool 👊🏻
@digeolrc85863 ай бұрын
Ran on lion battery?
@user-ln1nx9dy3m2 жыл бұрын
😊😊🤝💪👍👍👍
@darthnagus54574 жыл бұрын
You're gonna need a bigger road.
@TAMIYALegends4 жыл бұрын
Darth Nagus Yep I found one, but it turned out to be not long enough for the 6.5 motor 😂👊🏻
@paulobumaye64254 жыл бұрын
Please please please get you a proper 540 brushless motor and leave that 380 in a grasshopper!
@TAMIYALegends4 жыл бұрын
Paulo Bumaye Pmsl 😂 All I’m doing is trying every motor I have 🤷🏼♂️