Hi, please, do you know what the connector marked ETH is for? Is there any way to connect an Ethernet cable? I have several of these cameras on my 3D printers and if they could be connected by cable, it would solve a lot of my problems. Thanks man
@kabirsingh11715 ай бұрын
can you tell how to solve frequent disconnection problem after firmware update 1.3.9 in c100?.fed up with this issue
@khalildas741 Жыл бұрын
How do you disable those 3 led's? I want to place it behind a window, point it outwards. The led's cause a glare at night. Only workaround is using it in daylight mode. I can try wrapping tape over the led's but that may cause it to get overheated.
@Live_Loud Жыл бұрын
Only yellow led can be turned off. 3 red led are for Infrared and they're not so bright
@khalildas741 Жыл бұрын
@@Live_Loud I removed the led panel, which solves the problem. Cam still works without it, but the mic is also included in the led panel, so no sound. So I drilled a hole into the 3 led's at the top, but the led's were still functional. So drilled even deeper into the led's, and now all 3 infrareds are disabled. Now functions perfectly as an outdoor camera, placed inside the house. I put back the led panel inside. This drilling-into-led solution I got from quora.
@PragmatistSoul8 Жыл бұрын
@@khalildas741 what if we disable the speaker. Will the camera work???
@khalildas741 Жыл бұрын
@@PragmatistSoul8 I havent tried that.
@PragmatistSoul8 Жыл бұрын
@@khalildas741 ok thanks.. in case if you try it out... just put an update here.. thanks..
@danilopvc11 ай бұрын
Can someone point where is the WIFI ANTENA in this board? I plan on extending it but I don't know where to solder.
@kabirsingh11715 ай бұрын
can u find it?? if yes please tell me in detail
@degzero2 ай бұрын
Check for a text ANT1, it's close to ethernet connector. But it doesn't have sma connector so you may need to solder the antenna directly
@akshat01109 ай бұрын
Bought c100 today for 1700. Would you recommend any other indoor camera? Cloud storage is priority
@Live_Loud9 ай бұрын
I brought cp plus recently check video. In bbd they're being sold for 999rs right now. Order ASAP
@degzero2 ай бұрын
Even mine died recently, it's just hangs with red led and infra red leds ON, if I tap and hold the rest button for a brief moment it's indicates of system reset but again it gets back to hanged state, I'm assuming one or more components has failed and system is unable to initialise sensor due to this failure.
@Voke_Roblox2 ай бұрын
Mine rn is having an issue earlier where the status light is red and after reseting it turn to Red and Green flashing idk how to fix but i don't also want to lose it because is just 2 months now is acting
@MSU.Ай бұрын
Planned obsolescence is the only thing I can think of.
@degzeroАй бұрын
I agree it could be planned obsolescence, cos I couldn't use any of its core components for other purposes, the camera sensor was just bare sensor directly soldered on to the pcb, processor was from realtek with no usable debug points, IR sensores have a proprietary driver with its details etched off, so it was pretty much a scrap, I got new camera from qubo, hope it will last longer 🤞
@brizv Жыл бұрын
Can you tell me how you opened it please ? I want to open mine.
@Live_Loud Жыл бұрын
Open black plastic cover first by some knife or screw driver then all stuff is easy
@IamSkylordBoy Жыл бұрын
Sir can u tell me the problem why my basstube 8 inch speaker shake very hard with out playing music also 😢 when I stop the music also it shake like I playREBASSED song 😢 plss help me sir 😭💔
@Live_Loud Жыл бұрын
Shakes means? Subwoofer cone is moving without playing music? Rca cable ground issue might be there. Try to unplug the rca and check if it still moves.
@IamSkylordBoy Жыл бұрын
@@Live_Loud wowwwww 😭😭😭thnk u sir it work I just take out and plug the rca wire now the problem solve ❤️❤️❤️❤️❤️❤️❤️❤️
@ishmaelchibvuri10 ай бұрын
I had 2 of these exact cameras which just stopped working. That is very weird. What are those PINS for (marked ETH on the board?) Could that be hacked for Ethernet support and use this camera on Ethernet 🤔?
@Live_Loud10 ай бұрын
Mine aren't even turning on!
@ishmaelchibvuri10 ай бұрын
Yes. Mine are not turning on either. Nothing - no lights or anything. So I guess its a Tapo C100 thing then 😕
@Live_Loud10 ай бұрын
@@ishmaelchibvuri yeah they engineered it so complex that even their service center cannot repair it and we're forced to buy new camera. I already brought 2 new CP PLUS cameras and they're pretty much the same at half price
@MrJammer9 ай бұрын
My Tapo C210 went dead this month as well, When I put the power on the Camera Heats ups but not LED Blink no moving nothing@@ishmaelchibvuri
@sushantasinha31968 ай бұрын
Same to me tp link 200 camera not working after 1and half years
@GlenRichardE11 ай бұрын
Can you tell the tp link customer care number in tamilnadu
@Live_Loud11 ай бұрын
Kindly Google it. They don't repair anything only replace the product if it's under warranty.
@Voke_Roblox2 ай бұрын
Is your c100 fix already?
@Live_Loud2 ай бұрын
No it's not repairable. Scrapped
@Voke_Roblox2 ай бұрын
@@Live_Loud what was the problem? May i also ask did your C100 memory go unformat what I meant was when you check playback it said memory card not formated? because that happened to me earlier and the camera is 2 months and i was scared because i rely on this cctv so much as it if now it's the only security in the house currently
@Live_Loud2 ай бұрын
@@Voke_Roblox service center told me it's not repairable. I threw it away and brought new cp plus cameras
@Voke_Roblox2 ай бұрын
@@Live_Loud still tapo?
@Voke_Roblox2 ай бұрын
@@Live_Loud btw have you ever encountered the same problem as mine the one i said in my older comment