Cool, I'm a retired plumber so this is right up my alley. Went down to Lowe's and got it together and these are fantastic thanks.

This is probably the best and most simple video of making a shooting stand. Thank you!

Thank you so much my friend for doing this video! I’m commenting 4 years after you made it- but I just came back from Home Depot and put it together! You are one of my favorite You Tube channels! Thanks again- Long live the Republic!W.F.L21in Cali- unfortunately!

I would glue everything except the two horizontal pieces so it could be disassembled. Also, you can just staple your cardboard to the 2x2s and forget the plywood. Just a thought to keep portable. Not all of us have home range you luck dog.

Just finished building one. It was a piece of cake by following this video. Great tutorial.

Thats awesome! Some good ol KZfaq engineering!

Excellent DIY video, brief and to the point. Easy to follow as well. Thanks for posting this.

Nice stands. Never seen anyone do in pvc. Gonna try that. Thanks!!

Very nice build, simple and cheap, thanks my friend. Take care and God Bless!

You' re the man I use PVC for my photography reflector panels you got it right

PVC is definitely the way to go. I built similar stands a few years ago. They lasted almost 2 years with lots of abuse. ( a few misplaced rounds of bird shot did them in. LOL!) They are super conveinient. I did not glue mine because we were traveling to different ranges. I just slid them apart and tossed them in a duffle bag I found at Goodwill. Well done. Got to love projects.

Great DIY project my friend.

Wife and I have been shooting a lot lately using old discarded campaign signs, been thinking about building something similar to these! Thanks for the tips! Real nice!

Thx perfect Aiden God blessed you with more ideas 🙏 thx for shearing.

Thanks for sharing this great plan, they are so simple and sturdy. Really great..

Very creative. Great target for $18

Cool trick is if you fold a piece of 8.5 x 11 sheet of paper. It's the same size as the A zone of a USPCA target. For the head I use a credit card to trace might be a little smaller but tighter tolerances.

Great video! I love these, and I don't think they will ever wear out. Uses mine for years now and there still going strong!

Great video it helped me out very much. Thank you.

If you glue it together and it gets shot accidentally it is harder to fix. If you just stick it together and accidently shoot the stand it's easier to replace the individual piece that was shot. It is easier to travel with if you break it down throw all the pieces in the box

this is awesome,,looking forward to more videos as you work on your range!

Good stuff. I have made PVC stands for over 20 years. Not one time has it ever occurred to me to use wood. Super cool.

Thank you for this! Great ingenuity! And saves me some money😁

Thanks for this. It's pretty dope!

Nice job. Those targets will definitely work.

Awesome set up. wish I had my own range.

Very cool, I have something similar made of steel tubing but have it pretty shot up now.

This was awesome thanks mate

Pretty cool .thanks for sharing.

Very cool my friend, one thought, do you think the wind will blow them down? With the big wind catch on top may blow over. Just a couple suggestions, one you could fill the bottom tube with concrete (cheap and pretty easy). Or you could go get a couple, per target, large nails from home depot. They are like ground spikes, I think like a 3 penny nail or something, .89 cents. Then you could drill a hole through the ends of the feet and spike them into the ground. Just a thought... Very cool

U earned a sub

Very neat.

Nice job dude. I'm gonna make a few. Thanks bud.

I like your design but think I will put end caps on the base and fill with sand, blocking the riser with wood plug held by hot glue. This might help in a light breeze.

Good job my man!!!!!!👏👌😎

Awesome job man :)

Carry out Pizza boxes work good too

nice...plan to make some myself

Only change I would suggest is to not glue the crossbar on so it takes less space in a truck or automobile. I have a pvc stand I designed but yours looks better in that it won't tip over. I have to pile rocks at the base of mine.

Nice work, Thanks for the info

Very helpful my friend.

hey do you think this can support the weight of some steel targets ?

Looks great!

Did you have any problems of it falling over due to wind?

How much to make? Great video👍

would adding caps at the bottom and filling with sand make them better? I am about to make some and am wondering if there is any stability issues with wind where sand would be needed

I like it!

Easy DIY Target Project

Awesome idea! Thanks for sharing! ? Where did you get the template to make the target?

Looks good

Love the stands but 2 cost me 80 dollars

Thats cool

*Don't use PVC glue.* *If some jackass shoots the stand it's easier to replace a section if it's NOT cemented together with glue.*

how height is or back stop/berm

Can I have your steel targets? : )