Am i the only one who watched till the end just to see if he was gonna try and put that thing on a real firearm?

A moment of silence for all the people who thought this was intended for a real gun.

The rebar hacksaw was the coolest part of the video😎🤘🏻

Disposable muffler, what a great idea !!! Rock Wool is great for sound reduction. Used in sound deadening applications.

Im 57, and my father made them from a Briggs and Stratton lawn mower mufflers, basically the threading back then was the problem the muffler already came threaded, but, they worked better than the ones you can actually buy

Anyone else waiting to see it blow up???

It's actually amazing with some effort how effectively can silence lots of stuff , just for short use probably can make fairly effective.

I like the concept of using whatever you have or can buy at the hardware store. The design is kind of like a glass pack muffler, doubt it would reduce the decibels much. I do like your hacksaw frame built from rebar.

I started playing paintball in 1986, back then we had to make all of our own accessories, I made silencers exactly like this. They worked well for paintball, I would never try them on a real firearm.

Now I MUST make one of those... rebar hacksaw!!

Tri bolt I remember now,the actual thread cap was steal, the spring loaded locking divots were brass,as the paint came off and we were able to see the yellow brass color anyway again very cool

Beautiful work as usual. Works very well with high pressure gases like n-gas, etc. Absolutely love your design. Nice work. +1 a chamber inside a chamber with inlets.. for which the gases will go into as the projectile passes w/the high pressure gases directly behind it.. this works in physics. nice work. A+

I made one similar about a year ago for a cracked barrel .22 air rifle. It works damn good for squirrels, rabbits, and raccoons.

Oil filters make great silencers...The longer the quieter...The female threaded inlet, will fit specific threaded nipples...You secure the nipple to your piece, I silver soldered mine, on an HP .22, extended barrel, after removing some of the sleeve, over the barrel...It's cast or pot metal, melts easy too, so be careful...Then just shoot the first round through for the end hole, and you have a replaceable silencer...Sounds like a cap gun...Longer filters even quieter...

Great idea but those materials will almost surely melt and/or catch fire at much above a .22lr when exposed to repeated, rapid firings (note there was no attempt to validate its capabilities in actual use). The most fragile suppressor material I've yet to see is aluminum; there's a valid reason.

I like the dual use of his tools.

I would like to hear it on a 22LR and how much difference it makes.

I did something like this (not as detailed as this one) and it worked for the first shot. I didn't secure the dampening layer (I used sponges) and on the 2nd shot it all went flying out. Told myself I'd try again but just got busy with other stuff. Also my module was twice a thick and probably a 15" long.

Awesome. I don't know about using it as a silencer but I will make one but use it for a barrel shroud. Thank you.

I've got a damn pellet gun in .177 cal and that sumbich is LOUD! Louder that all of my 22LR's for sure. Only 1 pump and CRACK... which kinda sucks LOL. I think it's about 1,300 FPS which is more that common 22LR but it's close in either case. I think THIS item would suit it very well and I may try something similar to this as I think it'll work fine for an air rifle. Nice little tutorial vid and like many others have stated, killer rebar hacksaw!

How many shots can you fire before the plastic melts?

I love foreign films. I can't wait to see the one where it melts. 🙂

that's cool bro, i'm curious if you could add more baffle, or an end cap, i guess you could tape over the end and poke a hole,

For sweat kind of gun is that suppressor? The barrel looks too big

This design could be improved by making more room for more of the media(cotton or something synthetic?) and changing it to fine steel wool, which would last much longer.

galing ah..pwede na yan ipa order sa mga may kursunada budi..

Yes I was waiting for the demo. Ive always felt that the hardest part to a silencer was getting the extended threaded barrel. Where do those come from?

Muy bien hecho pero tienes que probarlo

It’ll work on a 22 caliber if you shoot bullets below about 1100 fps. The hardest part would be keeping the tube perfectly straight, in-line with the bullet travel. Keeping the bullet from making any contact with the inside tube, deflecting it. Perfect alignment could be a problem with an inner tube that small. Bullets over 1080 or 1100 fps you’d get a secondary boom coming from the bullet breaking the sound barrier.

I have a .22 MAG with threaded barrel. Maybe I'll throw something together like this and see if it makes it any quieter. Cool DIY!

Thee old bare foot clamp .. haven’t see that in years😊… but for real. Man your dope ✊🏽💯

Apparently designed for use with a water pistol.

I've seen hard metal silencers melt. So how well do you really think this will function?

Really love the colour. At least you're getting views! And that's the main thing these days. All the best.

But how effective is it?

Still think it would be interesting on let's say .22 caliber or so. I wonder how much it reduces the sound. Great build though.

Looks like a silencer from a 1970's dirt bike

Just hit the play to see the airsoft toys. Is the a sprinkler?

It is probably worth mentioning that civilian firearms are illegal where this dude lives. All they got over there are air guns, and most of them are home made. This is a tutorial on how to build a suppressor for such a gun. If you believe putting one of these on an actual firearm is a bad idea, you a correct. It is.

I bet 22 Lr would be ideal for something of those materials regardless that's pretty darn Cool

Ang galing, salamat sa pagbahagi at may paggagatayahan ako

What air gun is this most effective on? The Benjamin bull pup?

PVC gets really pliable when you ad heat, gonna act like an al dente noodle when it gets hot. We used to use a simple plumbing torch to make our own bends in electrical conduits

This guys going to put SilencerCo out of business.

A cap on the end drilled out over sized and a tire repair patch rubber cemented on the inside as a wipe would probably compliment the look completely

besides being illegal, would this not melt..?

I don't think that would hold pressure. But you can engrave your form 1 number with a pocket knife....

Hell, empty water bottle and steel wool works real good,too. For a 22.

Am i the only one thinking this is gonna melt snd likely catch fire?

Thanks for the heads up...wont waste my time...

First off...ONLY way it wouldn't explode on first shot is if ONLY USED ON A .22LR. Then there's not going to be any appreciable sound reduction overall because it's open ended. Need a wipe or cap to trap the gasses or it'll simply be a redirection device. The sound may be attenuated from the shooter's perspective but that's only because it was redirected.

It's only going to work until it gets too hot and melts, I've seen silencers glow red from being fired through too rapidly and this thing would be on 🔥! Cool idea for a toy gun or if you just needed to use it for a shot or two if you know what I mean 😀

Use stainless Brillo pads to take the heat away

No, I did too. Was curious to see how quiet it was going to be. And to see I how it would handle the heat. 🤔

A oil filter fits on a threaded barrel it's easier

For a 22. Rifle A 20oz mountain dew bottle filled with 00# steel wool and duct taped over the barrel would "probably" work really well, especially with Subs. Don't test this idea!! But remember it

Back in the day made them out of 2 or 3 liter bottles would work for a couple shots they would make a gun with power quite

Is ther a test video Wher it get used?

If your gun has a threaded barrel just use a oil filter

ATF : PVC PIPE IS A FIREARM

If pvc was a good material to use to make a suppressor manufacturers would have been using it along time ago. It probably cost way less than using the metal they use now.

I want to see it in action!

Is that for a super soaker?

Wow, what if someone accidentally used steel instead of pvc. Steel wool instead of cotton. That would be so horrible.

Prescription pill bottles the kind that can snap together clear orange colored with holes drilled in center, insert scotch brite or steel wool wrapped around a pencil which is used as a guage for hole size electric tape and super glue them as a monocore baffle inserted into a maglite flash light body for the can.. tightly wrapping duct tape on the end of 22 barrel so the can fits really tight when put on and as long as you dont mag dump a ruger 10-22 all you really hear is the reciever ejecting the casing but if you rapidly empty your mag its only good for about 4-5 rounds then heats up and fudgea up alignment and you're monocore pill bottle baffle is done,, of course this is all hypothetical and ive nwver made a surppressor for a ruger 10-22

Super 👌

Bro wont the silencer decrease power of Toy air gun?

For airsoft right?

Might work on a .22. Right?

So does it work or not?

Won’t it melt on the first magazine?

Its a cute novelty item.

Full auto rated?

This item would best be used on a slam fire shotgun. Paint it Black and put it on the end. I think that might just be a nice little adjustment.

Sabali talaga ti ilocano...adu diskarte na agannand ka lods

Did that filling MELT??

Maybe with a .22 for a shot time. Anything else and it’s melted to slag but most likely the first shot sends it on a one way trip down range.

Please visit and support my KZfaq channel guys😇 I would be grateful and I promise to improve all my future DIY project 😇 Thank you.

how does it attach to the gun

Great thank you!!!!!!

Show de bola.

The barefoot and home made rebar hacksaw. I'm dead. 🤣

Airsoft?

And now what about testing it to see if it works???

hey it might work for 2 shots then melt?

Think this would be more effective on the end of an exhaust pipe than on a weapon.

Magaling trabaho! This is how the NPA & HUCKS make silencers.

Good idea for urban air guns if you can't find one for your rig.

Nice share dis video

Lawn mower muffler ?

The feds are drooling over this one lol😂😅

I wonder if it would even stand up to 22 subsonic pressures? Maybe just launch lead and plastic into your target...

can you make a video for building a hacksaw

I'd like to try that out but I don't know who would get there first.. The aft or the range officer. 😂

Yeah the plastic would melt upon firing on a real gun. I made mine out of aluminum. Works great, but I'm going for steel next. 👍🤠💯

We need test of concept! I'm concerned the PVC pipe won't handle repeated muzzle pressure and start cracking or worse. Fun video, however.

WHy do I get the feeling this would be like holding on to a big old firecracker saying watch this

I'm digging his hack saw

The foot vise and rebar hacksaw are what made me think this is legit.

I actually saw something similar built from plumbing hardware. It was entirely ineffective.