How to change a brake chamber/ How to change a brake chamber on a semi-truck/ Brake chamber replace

Рет қаралды 157,918

2 жыл бұрын

New Shop Info: goo.gl/maps/HzwG98iioszjQWRP6
TAT Express Inc.
972-225-3017
4140 Langdon Rd.
Dallas TX 75241
How to change a brake chamber/ How to change a brake chamber on a semi-truck/ Brake chamber replace
brake chamber,air brakes,air brake adjustment,truck parts,air brake,brake chamber adjustment,brake chamber repair,brake chamber replacement,brake chamber release bolt,spring brake,brake chambers,brake chamber leaking air,brake chamber air line,air brakes explained,air brakes test,air brake adjustment training,semi truck repair,semi truck repair videos,How to change a brake chamber,How to change a brake chamber on a semi-truck,Brake chamber replace
Now Hiring!
Here at TAT Express, we are always looking to work with highly motivated people and service specialists to join our dedicated and knowledgeable team.
CURRENT POSITIONS
Service Advisor/ Service Manager
tatexpressinc.com/service-adv...
Journeyman Technician
tatexpressinc.com/journeyman-...
Apprentice Technician
tatexpressinc.com/apprentice-...
If this video has helped you in any way show your appreciation for supporting the channel
Cash App:$tatexpress
If you have any questions feel free to reach out to us at
info@tatexpressinc.com
New Shop Info: goo.gl/maps/HzwG98iioszjQWRP6
TAT Express Inc.
972-225-3017
4140 Langdon Rd.
Dallas TX 75241
Join our Facebook group
/ 2517634715134383
Check us out on Facebook
/ tatexpressinc
~-~~-~~~-~~-~
Please watch: "Most common issues on DD15"
• Most Common Issues Wit...
~-~~-~~~-~~-~
~-~~-~~~-~~-~
Please watch: "How to clean DPF/ Semi Truck/ DPF Maintenance/ Buying a used Semi/ How to avoid DPF issues on Semi"
• How to clean DPF/ Semi...
~-~~-~~~-~~-~
#TATExpress#DD15 #TATExpress #semitruckrepair

Пікірлер: 100

@ataata5152 8 ай бұрын

I overhauled my engine in this shop in 2022, spent 50 thousand dollars on my and first month engine broke parts inside, every month my truck was in the shop for leaks, and broken parts, after a year the engine still burn one gallon oil every 15k miles, totally regret overhauling in this shop

@raekwonmartin5627 2 жыл бұрын

Dope lifts didn't even know these existed for heavy duty equipment and great video. Feels good to have some refreshers.

@JayCalderon211 2 жыл бұрын

I may never do any of this but still I like to learn how is done. Thank you again Adam for the great content. I wish you well

@marcusmarcus3934 2 жыл бұрын

I’m no mechanic but am working a new parts job for peterbilt with no prior knowledge and these videos have helped me understand what these parts are, where they are, and what they do. Thanks!

@geoestrada5001 2 жыл бұрын

I’m a trucker and circumstances make myself self a mechanic too, sometimes the shop are very crowded and no time to loose, thanks again brother for letting me know how to doit with safety first,

@blairotv 2 жыл бұрын

Nice video we need more educational videos like these and how to do stuffs that aren't complicated to save shop time

@CastroEulis145 2 жыл бұрын

You done blown my mind off when you pulled out those lifts. Love this educational stuff because you do it better than most.

@sonofmontezuma3732 2 жыл бұрын

Hmmm on the road I do it different, sometimes the roll pins are frozen and I hv to cut the clevis or the slack adjuster has to come off and work it loose on vise, so at time I split the brake chamber to avoid all that. Back back in the day we use to replace diaphragms on the side of the road

@hardeepkumar7211 2 жыл бұрын

Thank you for teaching all the important stuff 🙏

@aussieinavan1774 Жыл бұрын

Thanks Adam loving these, I just bought a Sterling with a Detroit 60 still a bit unclear on cutting the push rod on the brake

@edwinrenemartinez5149 2 жыл бұрын

Glad to see you back either Spanish or English I enjoy your videos I'm the one who requested the video about your tools thank you again boss keep the hard work

@DNG1966 2 жыл бұрын

Cool jack stands u got there,awsome video much knowledge thx

@TATEXPRESSINC 2 жыл бұрын

👊🏼🔧

@mikekotarba5828 Жыл бұрын

Thank you for making this video.

@frank9649 2 жыл бұрын

xtra deep socket for the caging bolt, got one off the tool truck. Gotta make sure a guy get the right size clevis and pin size, there is bushings ya can get for that....important , otherwise they are out of sync with the other brakes 😉 Thanks for the vid, be well! PS: love them Gray lifts you got....$$$

@elcamionerous3894 2 жыл бұрын

Excellent brother great job thanks for sharing this knowledge

@DanielOrtiz-jn9tc Жыл бұрын

Thanks Adam I'm a self contractor, i do undecking and like to see videos like this so I can have more knowledge of how to do things even though I'm not a professional mechanic i like to have the knowledge and skills. Thanks on not forwarding fast like other videos does, you go slow and explaining on details, i really appreciate it, you're the best 🤜🏾🤛🏾 keep the hard job on teaching.

@amsoiladam 2 жыл бұрын

I have those same Mac wrenches, I love them Best wrenches I have ever had.

@michaelclark9278 2 жыл бұрын

Great job done 👌🏽👍🏼

@unperuanoenlascarreterasde9964 2 жыл бұрын

Thank you for your time !!!

@jehovaniaguilar-bl7wc Жыл бұрын

Thanks Adam I being learning so much about your great content.

@zebedeoarias288 2 жыл бұрын

Perfect video. I liked it

@donitmyself8935 Жыл бұрын

TA quoted me 400 for one chamber replacement. Thanks for this info. Saves me about 600 for 2 of em.

@Hallahanify 10 күн бұрын

That's the labor or the part too?

@Tanker_Wanker 2 жыл бұрын

Great info 👍 👌

@LONEWOLFTRUCKA 9 ай бұрын

Thanks bro for making these videos

@ArrowV4 2 жыл бұрын

great how to video !!

@darrylpina910 5 ай бұрын

I really like your blog ,,,, nice job

@ismaelhinojosa1418 2 жыл бұрын

I have a box truck hino when it idling engine sound good but when you push gas it makes a knocking sound where do I start working on it

@unperuanoenlascarreterasde9964 2 жыл бұрын

Great video bro

@guerrillahughey440 2 жыл бұрын

Great video boss

@TATEXPRESSINC 2 жыл бұрын

We appreciate the support 💪🏼🔧

@louiscruz3351 8 ай бұрын

i wish you did an actual replacement

@sandistephens210 Жыл бұрын

dang thats a cool truck lift!!

@mikeviolate666 Жыл бұрын

Awsome video thanks man.

@TATEXPRESSINC Жыл бұрын

Thanks for watching.

@michaelclark9278 2 жыл бұрын

What brand of wrench u use 🔧?

@bigaproduxions117x6 10 ай бұрын

And if your parking brake spring is broken which most the time is why your replacing it than how do you get an accurate measurement for your pushrod

@vaughndibble4598 2 жыл бұрын

good luck getting that caging bolt in michgan lol

@hdroadservice2021 Жыл бұрын

Did you release air pressure from the tanks?

@fernandocordero5464 2 жыл бұрын

What year should I stay away from freightliner cascadia? Looking to buy my first truck

@brkbrk5205 3 ай бұрын

When i replaced the brake chamber on the trailer what i did was: Release the brakes, back off the slack adjuster all the way and then pull the red line and then take off the hoses. Vise versa for installing. Can i do the same on the truck ? i miss understand that part thank you

@frostyxmeboi8878 6 ай бұрын

@ 2:56 i was taught to never position myself in this way for any reason regardless of safety precautions taken. Should I disregard that?

@jimmiller4951 2 жыл бұрын

Great content. Why did you have a chain over the axle and what was it connected to ?. Please explain the process . I am getting ready to change all 4 cans on mine for the first time and I do have lifts /

@wingnut5730 Жыл бұрын

The chain is put on before the vehicle is raised up. Chain goes around axle to the frame. Keeps the axle from sagging and putting strain on the suspension. The axle he worked on was not under the lift.

@Endangeredgenius Жыл бұрын

Solid video, excellent camera angles, plenty of knowledge. A+ brother. Just to be funny here though.. it's not "Carter pin" it's Cotter pin" hahahaha but for real, keep those videos rolling out, you're doing great.

@soundhealingbygene 11 ай бұрын

i work on 53 ft trailers but this helps

@sroc2766 2 жыл бұрын

Please do a video with a new brake chamber

@frkalo2008 2 жыл бұрын

Different procedures on front chambers?????

@slimer240 2 жыл бұрын

Where can I get those brake tools that you used for the adjustment with the orange handles.

@BigGeorgiaBoi Жыл бұрын

That a slack adjusters tool you can get it off of Amazon

@chalfantservicesllc2003 4 ай бұрын

Just paid $500 for a replacement (89$ chamber) I should have watched this video a few days ago.

@Hallahanify 10 күн бұрын

Why do you have trucks out of service sitting around the shop?

@ELDIABLO444 Жыл бұрын

You cut the length fully released !!! The way your doing it means the brake will require more pressure to apply the brake !!!!! Cause the pushrod is under more spring pressure. Screw in a air fitting to the spring break side to help compress the brake chamber before using the caging bolt (makes it easier to do.

@TATEXPRESSINC 11 ай бұрын

Thank you for sharing

@davidtitus5254 Жыл бұрын

Suggestion- instead of hammering a wrench, try interlocking unused ends for easy to control lateral force.

@TATEXPRESSINC Жыл бұрын

David, thanks for your input. I was used to using a hammer before the lifts gave us more space to work

@RR-qf9re Жыл бұрын

Great video but i wish you were doing an actual new chamber so we can see the whole clocking process

@TuggSpeedman_ 2 жыл бұрын

Im still learning how to do chambers but i was always told to never taking the caging bolt out once its off the truck is that true? They always said u take a risk of it exploding and i also was told to make my measurements with the chamber fully caged and then cage the new one before i cut….. any insight u could give me on this would help.

@TuggSpeedman_ 2 жыл бұрын

If its totally safe to remove the caging bolt from the chamber once u have it off the truck im going to start doing it because the cutting process i was taught confuses the hell out of me lol

@flyingmonkeydeathsquadronc968 2 жыл бұрын

@@TuggSpeedman_ Its relatively safe if the housing and the clamps are in good shape. Those parking brake spring are no joke though. Id advise doing it how you where taught and also understand that the cage bolt should be reinstalled until the parking brake spring is cut for disposal. They can kill.

@TuggSpeedman_ 2 жыл бұрын

@@flyingmonkeydeathsquadronc968 so cage both chambers, measure the old one and make my cut on the new one fully caged?

@flyingmonkeydeathsquadronc968 2 жыл бұрын

@@TuggSpeedman_ This is the right way. It sets the brake up properly so that it will minimize strain on the mechanism while maximizing braking potential. You never know what idiot replaced the chamber last so its good to make sure its right. I even have got a copy in a binder in my toolbox for reference. www.cbsparts.ca/admin/bulletins/PUSH%20ROD%20CUTTING%20PROCEDURE.pdf

@DONTCALLMETHAT 6 ай бұрын

So then what are the symptoms of a bad brake chamber?

@iMasterMechanics_1 2 ай бұрын

you're never supposed to use the old chamber to measure pushrod length . you use a square and tape while chamber is mounted on truck

@amonosrecio84 2 жыл бұрын

No soy profesional....menos tengo un Shop asi...pero en mi punto de vista es mejor,desajustar los frenos siempre!!

@AbdennourrrRNG 2 жыл бұрын

2015 Freightliner Cascadia with DD13 500 HP and 590 miles do you think is good for OTR?

@mauricemotors8207 Жыл бұрын

Anytime dealing with air brakes I always use colored zip ties for the air line and take pictures

@123tlamb 9 ай бұрын

Ratchet wrench would have been nice

@RampFisha 2 жыл бұрын

how do you change the rod and size it?

@speakingthetruth3830 2 жыл бұрын

Cut it with a grinder to match the original

@johnrtrucker 2 жыл бұрын

I am confident in my abilities to replace a brake chamber or even just replacing the diaphragm but I know what damage those brake chamber can do so if I can help it I'd much rather let a shop tech do it because for lack of better terms, once the brake is caged essentially you have created an IED lmao so I really dont like messing with em but I can if I have to especially when doing just the diaphragm or "clocking" the air ports

@level5599 2 жыл бұрын

Feels like I’m holding a bomb lol

@flyingmonkeydeathsquadronc968 2 жыл бұрын

Its more of an IED without the cage bolt especially if you drop it on one of the ears of the clamp and they separate had one fly 45ft once and it was worn out.

@Themba1222 2 жыл бұрын

Where can I get lifts like that

@maddenterprisesllc.3914 2 жыл бұрын

Like $20k a set of two I love ‘em as well though 🦾🦾🦾

@m.m.t.garageband688 2 жыл бұрын

*****🇺🇸🎼🎸🎤We like T new equipment 🤗 is more safety N easier 2 work 🥰 have space 2 move around more complicated 😇Tks TAT 4 another safe work video 👼🏻UR upgrade with technology 4T new trucks their R here already 🙏🏽🥁🎹🎶🇺🇸*****

@TATEXPRESSINC 2 жыл бұрын

Thanks for watching 👊🏼 🔧🚚