TAYLOR RC 35 USERS MANUAL AND DISCUSSION

  Рет қаралды 2,501

Meyer’s 2 Stroke Rc Garage

Meyer’s 2 Stroke Rc Garage

2 жыл бұрын

In this video we go over the Taylor RC 35 users manual and Do some discussion on it.
Here’s the link of the video first start of the Taylor 40  • RCMAX FIRST START THE ...
PARTS ON THE BUILD
Taylor Rc WT velocity stack
Taylor Rc small bore side pipe
Taylor Rc 54mm clutch carrier
Blackbone 54mm clutch bell
FS 9500 steel clutch
Rovan 63035 kill switch
Roller Baja
Taylor Rc 35cc engine

Пікірлер: 26
@renedoppenberg4762
@renedoppenberg4762 2 жыл бұрын
i can't wait for the vid to see how it runs !!!! I don't have the funds for such an engine but what a beast this power plant should be. and what fun it would be to see you run it... Congrats !!!
@Meyers2strokeRcgarage
@Meyers2strokeRcgarage 2 жыл бұрын
Thanks bro 😎 it’s supposed to be delivered sometime today 👍🏼 i’m going to put up all sorts of videos
@Losi5t20
@Losi5t20 2 жыл бұрын
Very nice, I just upgraded my 1107, with the spiral diaphragm, , MSD ignition, it really woke up my stock 32Z losi 5ive 2.0
@Meyers2strokeRcgarage
@Meyers2strokeRcgarage 2 жыл бұрын
I have a new video up of the 35 with a 990 rooster tail full mod carburetor if you wanna check it out TAYLOR 35cc NICE LITTLE RIPP IN THE PARK 100+ DEGREES FAHRENHEIT🥵🥵🥵🧨💥💨 kzfaq.info/get/bejne/Zq1hq7x42N-XYok.html
@Losi5t20
@Losi5t20 2 жыл бұрын
@@Meyers2strokeRcgarage Ooooo i idid , I'm waiting on my settlement and going to build 2 . Questions. Is the new carb equip with the sprail diphram, since it can handle more flow and higher gas octane. The the way it idles , dam it is sweet
@Meyers2strokeRcgarage
@Meyers2strokeRcgarage 2 жыл бұрын
As far as I know the rooster tail full MOD 990 does not come with a spiral diaphragm from Mike anyway 👍🏼
@Losi5t20
@Losi5t20 2 жыл бұрын
@@Meyers2strokeRcgarage Ok, was just curious. Thanks. Keep up the great content.
@mrmayhemftw6512
@mrmayhemftw6512 2 жыл бұрын
I order that same killswitch and came in yesterday so far best one for the price I had a Dynamite killswitch but it’s didn’t work it was brand new but nothing wouldn’t kill the engine so went with the one u have really happy now that I did
@Meyers2strokeRcgarage
@Meyers2strokeRcgarage 2 жыл бұрын
Mine just recently failed but the one I used lasted over a year 👍🏼 just a little heads up bro 😎 probably a good idea to replace them every now and again
@mrmayhemftw6512
@mrmayhemftw6512 2 жыл бұрын
@@Meyers2strokeRcgarage yea kind of figured they will only last a while but ones that happens to me I’m gonna go with killer bee next I hear that’s the best Option for any 1/5 scale but for now I’m good with the one I have
@mrmayhemftw6512
@mrmayhemftw6512 2 жыл бұрын
@@Meyers2strokeRcgarage I had a question when I start my Baja it revs high I hold the brake but ones I let go it’s want to take off I tune my carburetor and still the same idk what else it could be
@Meyers2strokeRcgarage
@Meyers2strokeRcgarage 2 жыл бұрын
@@mrmayhemftw6512 it sounds like you have some binding in your throttle linkage. It’s hard for me to say exactly what it is not being able to look at it but it sounds like you need to adjust the two stops with screws in them that have that spring between them in the throttle linkage if you catch my drift bro 😎
@mrmayhemftw6512
@mrmayhemftw6512 2 жыл бұрын
@@Meyers2strokeRcgarage I fixed it it was that thanks a lot now time to hit them fields
@15scalercgarage76
@15scalercgarage76 2 жыл бұрын
Congrats 👍
@Meyers2strokeRcgarage
@Meyers2strokeRcgarage 2 жыл бұрын
I’ve seen your videos brother congratulations to I didn’t comment on them but I gave them a thumbs up 👍🏼
@EZR
@EZR 2 жыл бұрын
Thanks for the masonry line engine stop idea man. Never heard that before. Gonna try it. I like using the clutch stop tool but not always possible.
@Meyers2strokeRcgarage
@Meyers2strokeRcgarage 2 жыл бұрын
No problem brother 👍🏼
@jovee75
@jovee75 3 ай бұрын
Question, top near carb fuel connect is return line back to tank? And the connection under the car is fuel feed to the carb from tank, correct?
@Meyers2strokeRcgarage
@Meyers2strokeRcgarage 3 ай бұрын
Correct 👍🏼
@deontay79ify
@deontay79ify 2 жыл бұрын
Hey anyway to contact u before I order mine so I know wat to get. U seem to know wat ur talking about
@Meyers2strokeRcgarage
@Meyers2strokeRcgarage 2 жыл бұрын
Yes do you have Facebook?
@Meyers2strokeRcgarage
@Meyers2strokeRcgarage 2 жыл бұрын
I also left a parts List in the description of the video 😉
@deontay79ify
@deontay79ify 2 жыл бұрын
@@Meyers2strokeRcgarage yes. DEONTAY hieb
@Meyers2strokeRcgarage
@Meyers2strokeRcgarage 2 жыл бұрын
Look my group up Taylor RC and Rovan RC performance group👍🏼
@deontay79ify
@deontay79ify 2 жыл бұрын
@@Meyers2strokeRcgarage sent friend request
TAYLOR RC 35 UNBOXING AND CLUTCH / CARBORATOR INSTALL
30:59
Meyer’s 2 Stroke Rc Garage
Рет қаралды 3,2 М.
TAYLOR RC 35 FIRST FIRE
11:28
Meyer’s 2 Stroke Rc Garage
Рет қаралды 2,4 М.
Wait for the last one! 👀
00:28
Josh Horton
Рет қаралды 134 МЛН
Sigma Girl Past #funny #sigma #viral
00:20
CRAZY GREAPA
Рет қаралды 32 МЛН
Did you believe it was real? #tiktok
00:25
Анастасия Тарасова
Рет қаралды 38 МЛН
MEGA BOXES ARE BACK!!!
08:53
Brawl Stars
Рет қаралды 35 МЛН
Husqvarna 61. First muffler mod
12:45
Tongue power saws
Рет қаралды 3
TAYLOR 35 RC ENGINE - TOP END REBUILD/SERVICE TUTORIAL
24:12
TAYLOR RC
Рет қаралды 8 М.
Understanding 1/5 Scale RC Clutches and Springs
13:06
CrucialRC
Рет қаралды 2,2 М.
Sending it full throttle. Taylor Losi 5T 40cc Baja 50cc DCRR Part 1 of 2
12:31
Drive Crash Repair Repeat
Рет қаралды 22 М.
AMERICAN muscle BIG ENGINES & LOUD startups
9:39
Shabang
Рет қаралды 8 МЛН
TAYLOR 35 given a good THRASHING!
5:58
RCmaxxUK
Рет қаралды 3,3 М.
Cunning GUYS 🤣
0:15
dednahype
Рет қаралды 2,7 МЛН
Me: Don't cross there's cars coming
0:16
LOL
Рет қаралды 8 МЛН
Телега - hahalivars
0:55
HAHALIVARS
Рет қаралды 2,8 МЛН
1❤️
0:17
Nonomen ノノメン
Рет қаралды 12 МЛН