this is xy-wj01 timer which have multi functions settings but we need to set it on loop setting which will we useful for incubator egg turners and other things we need to work for limited time. #xywj01 #timer #wiring
Пікірлер: 37
@simulatedfish199511 ай бұрын
Thank you for the clear instructions and assistance and setting this up for DIY use
@Umairworkshop11 ай бұрын
You are welcome
@balik_tutkusu2 жыл бұрын
Thank you for explanative video. You saved me to loose time to decipher this control unit.
@Umairworkshop2 жыл бұрын
You are welcome
@nonam28632 жыл бұрын
best youtuber and videos bro big fan from nepal
@Umairworkshop2 жыл бұрын
Thank you
@pearljameric2 жыл бұрын
This will work well for my live well timer in my bass boat. Thanks
@Umairworkshop2 жыл бұрын
You are welcome
@yasinkizilirmak74682 ай бұрын
Thank you.
@Umairworkshop2 ай бұрын
You are welcome
@enriqueavila2234 Жыл бұрын
Muy bueno y bien explicado gracias solo mejor que fuera en Español
@Umairworkshop Жыл бұрын
You are welcome
@anooky1 Жыл бұрын
Humidity and temperature controller mai kosi acha kam karta hai ?
@Umairworkshop Жыл бұрын
Xm18 is better
@lynnzimmerman48536 ай бұрын
I am controlling an LP generator and would like the timer to be on OUT for 1 hour (OP) and remain off for 2 hours (CP), then loop back to the beginning to start the timer again. I am using (P4) but I am having trouble with setting the times with multi decimal points, etc. Can you show me what the settings should be for 1 hour when displayed on the screen, showing the number and how many decimal points show?
@Umairworkshop6 ай бұрын
If set like 9.9.9 it means these are minutes and if set like 99.9 it means it is hours
@robbousquin96305 ай бұрын
could you tell me why my unit " ALWAYS " "Always" shuts down completely after 5 mins exactly 5 mins. is there a setting someplace to prevent this thank you
@Umairworkshop5 ай бұрын
I think it is set on saving mode only display will shut off but will keep working, if it shut down the circuit and you have to set again then it might be a circuity issue.
@cyberbeast17892 жыл бұрын
Is your FAN 220v AC? i just bought one of this and upon checking the board inside, the relay spec is 20A 14vdc and 125vac only. And in order to safely run 220v appliances a relay must have 250vac. from philippines.
@Umairworkshop2 жыл бұрын
Yes fan is 220v , relay must be 220v or it will burn
@enesaydn60542 жыл бұрын
Thank you for video sir. Can you explain too p4 if it possible
@Umairworkshop2 жыл бұрын
Here is the full detail kzfaq.info/get/bejne/mrZ7g92Al7OlmGw.html
@enesaydn60542 жыл бұрын
@@Umairworkshop thanks a lot
@Umairworkshop2 жыл бұрын
@@enesaydn6054 you are welcome
@v.gedace1519 Жыл бұрын
What happens if e.g. program P6 is running, the power fails and after a few minutes the power is back? In this case, does the last used program (P6 in our example) start automatically or must some button be pressed?
@Umairworkshop Жыл бұрын
Once the setting is set it will be save on it , if light fails and come back it will start counting from the start
@pearljameric2 жыл бұрын
Is there a way to turn it completely off?
@Umairworkshop2 жыл бұрын
Yes it can be turn off by on off button
@anooky1 Жыл бұрын
یہ بہتر stc سے ??
@Umairworkshop Жыл бұрын
Yeah sirf timer hai
@anooky1 Жыл бұрын
@@Umairworkshop acha mai tu samja tha ya humidity and temperature controller hai
@anooky1 Жыл бұрын
@@Umairworkshop stc mai bhi humidity and temperature setting controller hai woh acha nhi hai ??
@Umairworkshop Жыл бұрын
@@anooky1 stc series bhi theak hain lekin un mein degree difference ata hai
@anooky1 Жыл бұрын
@@Umairworkshop ZFX.W9002 ke bari btay ya bhi temperature or humidity sath mai hai?