In this video I am testing/using the TBS Crossfire system: tiny.cc/TBS-Crossfire-TX16s on the AR Pro Wing: tiny.cc/AR-Wing-Pro 🤘🏻 For a full kit list with links please see the video description. Thanks for watching 👍🏻
@teejay24k2 жыл бұрын
That view is A M A Z I N G
@AdamGdoesFPV2 жыл бұрын
It never gets old ⛰ 😍
@chuckkissel27853 жыл бұрын
Nice Video. No reason to use anything else but what you got. Radiomaster Tx16 with a Micro TBS, it is the perfect combo for anything from Drones-Planes-Wings.
@AdamGdoesFPV3 жыл бұрын
Yeah I'd agree it's a great combo. It'sthe kit i'd recommend people go for if they're just starting out in the hobby now. Skip the 2.4g control with it's fail safing😁
@fatihbirkan85273 жыл бұрын
10 kilometers away and below the tree tops. Awesome flight. Thanks.
@AdamGdoesFPV3 жыл бұрын
Thanks 👍 This is the must fun type of flying for me
@stuweFPV3 жыл бұрын
Welcome to the CRSF club :) I'm amazed how good your video is and how you fly 12km out! Nice run!!!
@AdamGdoesFPV3 жыл бұрын
Cheers Stuwe. I cannot wait until the weather improves, once I can fly in calm conditions I'll try and push it a lot lower than this :)
@stuweFPV3 жыл бұрын
@@AdamGdoesFPV can't wait to see it :)
@alexgrigoreas48253 жыл бұрын
I don't know why I have been nervous about using the Crossfire for longer range, but I'll give it a shot now. Great vid Adam Thank you.
@AdamGdoesFPV3 жыл бұрын
No worries. Make sure your failsafe is working well and go push the range👌🏻
@Joyplanes3 жыл бұрын
I need to get one of those 1.3 Ghz video systems.
@AdamGdoesFPV3 жыл бұрын
For sure it's a complete game changer moving from 5.8g. The freedom it gives you is incredible🤘🏻
@chiewy7783 жыл бұрын
You're at this field so often they should name it after you. Nice flight and thanks for sharing the video.
@AdamGdoesFPV3 жыл бұрын
Haha yeah well at the moment with restrictions in place I can’t go from home, so the local flying field it is. I do love this spot anyway 😁 cheers
@damienmilk30253 жыл бұрын
As always; no-nonsense concise information. Thanks.
@AdamGdoesFPV3 жыл бұрын
Thanks Damien, I appreciate the great feedback🙌🏻😊
@anonymousdrft2 жыл бұрын
So impressive almost hard to believe. I’m having trouble getting over 1-2 km running at 1w.
@AdamGdoesFPV2 жыл бұрын
Sounds like you have either an issue with your setup or interference in your area. People have been known to go as far as 80km on 250mw 😯
@mpsaeris18553 жыл бұрын
Hi Adam, awesome video as usual. it is Nice to see that even with everything installed so close to each other,, there is no interference (as I was told to place the "trinity" as much apart as possible).
@AdamGdoesFPV3 жыл бұрын
Thanks 😊 Ideally you do want to keep the 3 components separated as much as you can as it will give you the best chance of it performing well. However, as you can see from this video it doesn’t have to be a huge distance apart.
@OliversAviationvideo3 жыл бұрын
Lovely video and you have a great spot.
@AdamGdoesFPV3 жыл бұрын
Thanks 😊 I do love this location 🤘🏻
@EnglishTurbines3 жыл бұрын
Had a lockout on my R9M at close range yesterday on my quad. Not heavily invested in it, I decided to give it the push. Ordered a Crossfire Micro V2 TX Module and a Nano SE RX.....The new TBS App that runs under OTX finally pushed me into it. This and the RF in OSD etc...This is your fault....lol...
@AdamGdoesFPV3 жыл бұрын
Lockout at close range is bad news, flying with a reliable control link makes the hobby so much more enjoyable. I think buying a CF is a good move and you’ll really like it. The app is nice, this user friendly setup and config is a huge advantage over Dragonlink. Anyway, if it’s my fault you bought one, it’s a good thing, so... you’re welcome 😄
@EnglishTurbines3 жыл бұрын
@@AdamGdoesFPV I think it was a combination of the TX on Flex dropping its output and the VTX antenna being between me and the Rx antenna. It's a bit weird TBH, the RX just froze but I did have FS set to hold, which it did. The RSSI on the DVR was nailed at 99%...the quad was pretty low, so no real damage...I'm sure CRSF will be a more secure link...😳😀😀🇬🇧
@AdamGdoesFPV3 жыл бұрын
CF won’t let you down 👍🏻
@ObsidianFPV3 жыл бұрын
Well hey, I learned that that Xfire info is available in the Inav osd!! Did not know that.
@AdamGdoesFPV3 жыл бұрын
It's really handy to have! You get a much better indication of how your link is in comparison to RSSI. Cheers for watching Mike
@ObsidianFPV3 жыл бұрын
@@AdamGdoesFPV not sure how I missed this. lol
@rwdkai3 жыл бұрын
Brilliant as usual, especially with that wind..
@AdamGdoesFPV3 жыл бұрын
Thanks! Yeah I can't wait for calm days
@AerialWaviator3 жыл бұрын
Great video. I learn a few new things (to me) from each of your videos. Was surprised at how low you managed to maintain beyond 7 km out. Definitely a fun route. Thanks for sharing.
@AdamGdoesFPV3 жыл бұрын
Thanks for watching! I do love this route, I plan on running it extremely low in the summer. Glad it was helpful. Cheers
@raffyturc3 жыл бұрын
nice combo. 868/915 and 1.3GHz 👍
@AdamGdoesFPV3 жыл бұрын
Sure works well 🙌🏻
@EnglishTurbines3 жыл бұрын
Nice real world demo matey...from your Irish Mountain top...lol...I like how iNAV?...shows your RF level. I wish the R9M system could do that...Did you have your CRSF antennas vertically polarised?...Silly question I know..🤔🤔🤔😀🇬🇧🇬🇧
@AdamGdoesFPV3 жыл бұрын
Cheers mate, yeah the OSD items are super handy! I love this kind of info.Yeah I have antennas vertical on both ends 👍🏻
@kerbouchaud13 жыл бұрын
Awesome vid as always. I'm just now getting into I've been using the 2w crossfire for years now, but It looks the real star of the show is your 1.3g video, Crystal clear!
@AdamGdoesFPV3 жыл бұрын
Oh yeah 1.3G video is what makes FPV fun for me. Without it I’d feel quite restricted
@EdwardChew3 жыл бұрын
Dang the osmo video is so smooth
@AdamGdoesFPV3 жыл бұрын
Yeah it's a good piece of tech. I still prefer it to any of the gopros that exist
@glenncarter21263 жыл бұрын
Great clip, I'm a huge crossfire fan, it works great and the whole thing is so simple to configure and update 👍
@AdamGdoesFPV3 жыл бұрын
Couldn't agree more! I love the user friendliness.
@eckythump64292 жыл бұрын
In line with what others have said and problems Coyote had I’ve stayed away from 1.2/3 with CRSF. Your video and link look rock solid. Think I might have to give it a go. Great vid by the way. Looking forward to the river run premier….
@AdamGdoesFPV2 жыл бұрын
Yeah I heard of people having problems but I just needed to get out there and try it for myself. As you can see, no problem at all 😄 I think the key to it is making sure you're not stood too close to your groundstation. Enjoy
@ninjafox89443 жыл бұрын
It's hanging out like shit in an ice hole.😄 Thank you for sharing your experience with cross!
@AdamGdoesFPV3 жыл бұрын
haha🤪 no worries mate
@WinstonSmith19843 жыл бұрын
Thanks for the detailed info. That's a fantastic place to fly. If you know where all the cables or other dodgy spots are on that route and if you go there on a calm day, then you can get down really low where possible. That'll be awesome.
@AdamGdoesFPV3 жыл бұрын
Yeah I'm looking forward to some calm days. I have plans to try and fly under the bridge at 7.5km, but it's very high risk of crashing.
@jimclayton873 жыл бұрын
Amazing flight/video once again
@AdamGdoesFPV3 жыл бұрын
Thanks Jimmy😃
@Ard14003 жыл бұрын
Great video Adam! And what a good video quality. I am very impressed.
@AdamGdoesFPV3 жыл бұрын
Should hope so when I have a $360 video antenna on the ground 😅But yeah video is pretty solid and it seems to play nicely with CF👍🏻 Cheers
@IdeologieUK3 жыл бұрын
Hey Adam, Richard here (Flyboysee). Glad to see you’re still doing the LR and building, flying etc. I’m keen to get back into it... could we have a chat sometime? Sorry if you saw the LDO podcast, I totally forgot your name :) Hope you’re doing well!
@AdamGdoesFPV3 жыл бұрын
Richard! Welcome back, great to hear from you! Yeah I'm still into it and glad to hear you're getting back into it too. No worries for forgetting my name, it has been like 5 years since we last spoke 😂. Yeah happy to have a chat some time. Cheers👍🏻
@BigDaddyI1I2 жыл бұрын
This is how this would go for me: Step one: Go out and get a long range FPV system. Step two: Buy an ATV or a horse or rent a helicopter to retrieve my model when something fails and it goes in somewhere so remote that no human has set foot there in a thousand years... ...I think I'll do it anyway. 😬 Great video, excellent background comments.
@AdamGdoesFPV2 жыл бұрын
Haha sounds like you'd have fun collecting it anyway 😆 Thanks for watching and for the feedback 🙌🏻
@blaqmoses52743 жыл бұрын
dang adam .i really enjoyed that one. tell me one thing tho.how did u get the crossfire output power and the lq in the osd?is that part of the most recent nav?thank u
@AdamGdoesFPV3 жыл бұрын
Thanks, glad you enjoyed it🤘🏻 I think it's new OSD items in iNav 2.6.
@z3kir3 жыл бұрын
Love your flyings!!
@AdamGdoesFPV3 жыл бұрын
Thanks 🙌🏻
@k1ortia3 жыл бұрын
Great video, and a awesome wing
@AdamGdoesFPV3 жыл бұрын
Thanks Kyle😃
@n1vca3 жыл бұрын
Thanks, very interesting ... I would have guessed that 1.2 GHz video TX, being relatively close to the 900 MHz crossfire TRX's frequency would desensitize it, but it seems they have quality bandpass filters on the front end of the tiny trx that avoids this effect. Since we have mobile networks operating around 900 MHz in Europe, I guess they had to add very good front end filtering to maintain good receiver sensitivity without being overloaded by the very strong nearby signals. I am planning to build a long range wing this Q2 as well and am still unsure if I should go with a digital high res DJI FPV system or since I am a radio amateur, also operate a 23cm (1.2 GHz) analog transmitter that I can run with as much power as I like. If going analog I have to put a real ground station together, which has the beauty that I can build my own high gain antennas and get a very good range. The problem is that I am already spoiled with a digital 720p HD signal from my Parrot Disco wing and as I see here on KZfaq, watching analog can be painful at times. Though your analog system looks pretty good. I guess I have to make up my mind soon and order stuff from China, since it will take a month to get here and the fun flying climate is coming to Germany soon.
@AdamGdoesFPV3 жыл бұрын
Whatever they've done it works. I'm running mine on the legal channel here which is 868. I also have a 720p HD FPV system on my mini Talon (Shark Byte) and to be honest although the picture is clearer, i prefer 1.3g analogue so much more. The freedom it gives you cannot be matched by any HD system that exists today unfortunately. In fact I'm going to sell my HD system and stick with analogue 1.3. Cheers
@FPVTrond3 жыл бұрын
Thanks for sharing :) Didn't think crossfire and 1.2/1.3GHz was a good combination, thanks for showing that it is. You are using 5.8GHz relay from ground station to goggles right? By the way the link for Matek VTx in your description doesn't work. Is it 630mW?
@AdamGdoesFPV3 жыл бұрын
Glad I could help! Yes it seems a decent combination for me so far, had no issues with it. Yes 5.8g relay to goggles. Thanks for the info on the link, I'll fix it. The vtx is the 630mw yes: www.banggood.com/MATEK-System-1_2Ghz-1_3Ghz-9CH-VTX-1G3-9-International-INTL-Version-FPV-Video-Transmitter-for-RC-Drone-Goggles-Monitor-Airplane-Long-Range-p-1602996.html?p=RB010715711422015054&custlinkid=1514695&cur_warehouse=CN&ID=6301681
@rclatebloomer78803 жыл бұрын
Great video! I have DL and always had an itch for crossfire, but the thing with 1.3 ghz always made me think twice, but after watching your video, on the first chance I get (moneywise, he, he), I´ll grab the CF MT V2, Cheers!
@AdamGdoesFPV3 жыл бұрын
Glad I could help! I was unsure what to expect but it works great. Cheers
@rclatebloomer78802 жыл бұрын
@@AdamGdoesFPV Did it! Bought the CF Micro V2, just one question, do I have to have a notch filter with my 1.3 Groundstation? (sorry if you´ve already answered) Cheers!
@grim-upnorth3 жыл бұрын
Crossfire looks solid af mate!! Very interesting seeing the stats on screen, especially seeing how it deals with keeping a good connection with a combination of increasing the power (I'm assuming dynamic power mode on the TX) and changing RF profile to different frequencies. ☁ ☁ ⚡ ✈ ⚡ ☁ ☁
@AdamGdoesFPV3 жыл бұрын
Cheers mate. Yeah using dynamic power mode, should have mentioned that at the start really. Crossfire is certainly very capable! 😁👍🏻
@aidanmcgee59003 жыл бұрын
Awesome video as usual Adam. I also took the plunge into Crossfire, sold all my R9 gear. Very happy with it, couldn’t believe how easy it was to bind RXs and setup. Needed 3 hands binding FRsky receivers 😂. Will you go full out CRSF on all models now? Or stay DragonLink?👍
@AdamGdoesFPV3 жыл бұрын
haha I hear you on the FrSky binding! CF is for sure the most user friendly of all control systems I've used, real nice design. I'll stick with Dragonlink on the planes that already have it as it just works, but new planes will probably get CF as it's easy to get hold of and cheap! Cheers mate
@Checkyoursix773 жыл бұрын
Great content as usual! 👍 How much did the crossfire affect the video quality? Did you use a notch filter? Didn’t know you could use crossfire with 1,3 ghz video without interference. That’s why I use 433 ghz mfd link but I would love to use the crossfire instead.
@AdamGdoesFPV3 жыл бұрын
There was no loss in video quality, as you can see from the live feed my video was pretty solid throughout most of this. I used no notch filters, I believe the trick is physical separation between your CF Tx and tour video receivers. Take a look at the landing at the end you’ll see I was stood a nice distance away from my tripods. Cheers 😊
@ronbo4223 жыл бұрын
Adam, awesome video! My Mini Drak currently is equipped with a Myflydream 433MHz RC link, with 1.3GHz video. I'm thinking of trying Crossfire on it and am curious how the 900MHz and 1.3G video play with each other? Did you have to do any filtering on either the wing or your goggles?
@AdamGdoesFPV3 жыл бұрын
Hi, no filtering on either end, this is just plug and play. I had some separation between my CF tx and video rx and I believe this really helps. Cheers
@MrBulukuduk3 жыл бұрын
always Awesome.. compare to other type you have, MTD mini crosswind, which one do you prefer for long range fpv?
@AdamGdoesFPV3 жыл бұрын
The MCW for long range. It’s more stable and relaxing to fly, it can carry whatever you want, it can fly for hours if you need it to... and it’s super quiet in comparison. Cheers
@MrBulukuduk3 жыл бұрын
@@AdamGdoesFPV Thank's adam.. Seems AR wing is born for speed according to specification, and also other prove that both type can reach 200km flight than glad to hear from you who have both plane.. :)
@RakishRc3 жыл бұрын
Great flight 👍 is it the 900mhz tbs crossfire?
@EnglishTurbines3 жыл бұрын
868mhz only here in the UK....915mhz is our Cell phone system...🤔🇬🇧
@AdamGdoesFPV3 жыл бұрын
It's switchable between 868 and 915. Mine us running on 868. Cheers😃
@RakishRc3 жыл бұрын
@@AdamGdoesFPV Nice to know that 👍
@QTMagic3 жыл бұрын
Whereabouts are you flying? Are you in the UK? The scenery is lovely!
@AdamGdoesFPV3 жыл бұрын
Not UK, this is Ireland. It’s a lovely flying spot 😎
@goku4453 жыл бұрын
Range is incredible flying so low. Video quality is near perfect as well.
@AdamGdoesFPV3 жыл бұрын
That's 1.3g with good antennas for you😎 for me nothing can beat the experience of this setup. Thanks
@GameBug133 жыл бұрын
What's up with the Matek VRX-1G3-V2. He used to have big problems. How things are now with TBS.
@AdamGdoesFPV3 жыл бұрын
I'll be trying it again soon with CF
@andrewjamez3 жыл бұрын
Awesome flight. Do you have line of sight for the whole flight?if so pretty incredible location.
@AdamGdoesFPV3 жыл бұрын
Not quite, I'm behind land and trees for a lot of the river section. Thats why I run high gain antennas for video😎 cheers
@flyhigh_hifi3 жыл бұрын
Hi Adam! Thanks for video, waiting for my pepperbox now to dive into 1.3 🙂 By the way did you use telemetry in this flight? If yes where did it fell off?
@AdamGdoesFPV3 жыл бұрын
Pepperbox is awesome, you'll love it! The tx gives voice commands to tell me when telemetry is lost and recovered. I did lose telemetry for small periods of time maybe 3 or 4 times during this whole flight. Cheers
@egtreadway42322 жыл бұрын
Hey Darren I know you no longer have your ar wing pro but looking at this video I'm just wondering how and why did you install the immortal t antenna out on looks like almost to the wing tip? I have new wing s coming for mine and will do the same as yours. Were did you mount the receiver? Did you use the extra long 120mm antenna? I've always mounted my rx antenna vertical in fuselage on one side and 5.8ghz fpv antenna on other side of fuselage. I'm thinking the way you do it might help with signal for both. Just to let you know after following your advice on autolaunch this wing launching pretty good, I used to launch in cruse mode and I never took a few steps in direction of flight, I now activate autolaunch in manual,a few steps forward and away it goes in straight line like magic. It's taken me 2 years, alot of glue, a shit load of spare parts but this technique is what resolved my issues. Thanks so much
@AdamGdoesFPV2 жыл бұрын
Hey, I mount the rx on the wing for good separation of antennas. The ARPro is designed to make this really easy as it already has the compartment out on the wing with the wiring. I just put the Rx in the wing and used standard antenna. Hope this helps
@STEDDiEFPV8 ай бұрын
Hey Adam, I noticed the immortal T is mounted vertically on the wing. Was it also vertical on the TX side? I thought the crossfire Micro V2 Tx comes with a stock immortal T antenna which is fixed on the horizontal plane. Is this true?
@AdamGdoesFPV7 ай бұрын
Hi, no not true, the antenna on the tx is bendy and can be twisted so that you can have it vertical when flying and horizontal for storage
@JahspiT3 жыл бұрын
I was wondering if it was possible to use 6s Lion pack with AR PRO PNP ESC ? Thanks !
@AdamGdoesFPV3 жыл бұрын
The stock PNP ESC is only rated for 2-4S so I'd recommend using a different ESC if you want to run 6S
@supriyakumarmishra91772 жыл бұрын
I am a rookie here, but I have a question, before getting the controllers, and gadgets part sorted, how do you get the body of the drone, is it hand made or is there a marketplace for it.
@AdamGdoesFPV2 жыл бұрын
Hey, look in the video description there are links to every part I use, including the plane. All the planes I fly are kits, not self moulded. This plane is called the AR Pro: tiny.cc/AR-Wing-Pro
@crowbaril903 Жыл бұрын
Anyone know if I can find a wing that comes with everything but the control? & I could bind to say a dji control or a stripped down control (like the Mav Mini or the miniSE type)
@AdamGdoesFPV Жыл бұрын
You can buy some planes that come with an 'FPV' option. This usually includes everything you need apart from the control gear and the batteries. E.g. The Flying Fish tiny.cc/FlyingFish
@rctechproflying19032 жыл бұрын
Great video, I've been trying to add GPS display on my TX16S , with TBS Nano receiver. my telemetry is not showing GPS coordinates and main on board battery readings. What do I do to get the data to display? I have the Matek F-405 Wing FC on my AR wing.
@AdamGdoesFPV2 жыл бұрын
Hey, I don't have any telemetry data displayed on my Tx... I just use the OSD in iNav to display on my live feed.
@rctechproflying19032 жыл бұрын
@@AdamGdoesFPV If you lost connection with your aircraft how do you get you GPS coordinates? When I had the R9M with the R9mini receiver I was able to setup telemetry to the radio display with that, I was able to take a picture of the coordinates on the transmitter display with my phone and paste it in a software on my phone and it will give me the location with direction to the lost aircraft it worked like a champ. Thanks for your reply.
@AdamGdoesFPV2 жыл бұрын
@@rctechproflying1903 just take the last known coordinates from the DVR recording. My coordinates are included on my OSD
@rctechproflying19032 жыл бұрын
@@AdamGdoesFPV yes, i receive data on my goggles off the FC. I’m going to try using the channel 3 and 4 for TX and RX on the Nano receiver and get data from the FC off the RSSI out and see if that will work. I will let you know. How do you like the AR Wing Pro frame? Have you flown the AR wing 900mm?
@caringcenter53753 жыл бұрын
please test expressLRS
@AdamGdoesFPV3 жыл бұрын
Probably won't happen sorry. Crossfire is just so cheap and works really well
@caringcenter53753 жыл бұрын
@@AdamGdoesFPV ExpressLRS very cheap, just use R9M flashed to expressLRS
@joseferreira98033 жыл бұрын
Hey Adam, Will you review insta360 go2?
@AdamGdoesFPV3 жыл бұрын
I’ll consider it. I do love the Insta 360 full size but the first ‘go’ had a 5min battery life rendering it fairly useless or at least very limited.
@TiimedArts2 жыл бұрын
Okay I am relatively new to FPV and saw that you can get an insane range with tbs crossfire. But what about the video? How is it possible to get a better video signal and a better range? Can crossfire do that too?
@AdamGdoesFPV2 жыл бұрын
No Crossfire is control link only, has nothing to do with video. If you want to see and understand my video gear watch this kzfaq.info/get/bejne/nbSImNaosNDRnYU.html
@gliss07243 жыл бұрын
So no interference using the Crossfire system with 1.3 video?
@AdamGdoesFPV3 жыл бұрын
As much as you see in this video 😊
@yongfpv62393 жыл бұрын
elrs 2.4g is coming so!
@AdamGdoesFPV3 жыл бұрын
Won't be for me as 2.4g doesn't play well with 1.3g video 👍🏻
@gregorydobson43072 жыл бұрын
Hi, where you on high ground when you launched/landed ?
@AdamGdoesFPV2 жыл бұрын
I was on a hill. You can see it at the end of the video maybe. The river is over 100m below me
@Jay-zc7iq Жыл бұрын
Hi Adam quick question 🙋♂️ new flyer got tx16s about to buy the crossfire you have , not running a fc at mo do I need a csrf to pwm in between till I get my fc thanks in advance
@AdamGdoesFPV Жыл бұрын
Hi Jay, yes you'll need a PWM converter as without an FC you have to plug servos and esc cable into the RX
@Jay-zc7iq Жыл бұрын
@@AdamGdoesFPV Cheers fella , so I picked up a couple pwm converters , decided on a sparrow 2 for rth think I run the nano on sbus that way or something, cheers sir very helpful & absolutely love the flights
@SM-cf7kv3 жыл бұрын
Are you using notch filter !
@AdamGdoesFPV3 жыл бұрын
Nope. No filters on anything
@kerrycorcoran48853 жыл бұрын
Adam, I thought TBS Crossfire and 1.2/3 had issues when utilized together?
@AdamGdoesFPV3 жыл бұрын
I hear some people have issues with the video feed yes. But from what I read if you keep a bit of separation between your CF tx and your video receivers you should be fine. So far I've had no issues at all
@cactusjackthedesertrat56012 жыл бұрын
What would you suggest for a lipo battery and charger?
@AdamGdoesFPV2 жыл бұрын
I use a 2 channel Turnigy Reaktor charger. They don't have the exact model anymore but I think this is the newwer version of it: hobbyking.com/en_us/turnigy-reaktor-120-duo-2x120w-balance-charger-ac-dc-eu-plug.html?affiliate_code=HIMTQOSVVQZHJLM&_asc=2349685468 Depends how many batteries you need to charge and how quick you want to be able to charge them all. Cheers
@cactusjackthedesertrat56012 жыл бұрын
@@AdamGdoesFPV thank you very much Sir
@MOKKAPA_FPV3 жыл бұрын
What version of firmware do you use in the crosfire module?
@AdamGdoesFPV3 жыл бұрын
Not sure actually. I'll check it out later, but it's whatever was the most recent version in Jan this year
@jhughes22863 жыл бұрын
How is your RSSI so high? I'm using the exact same CF module and rx and antenna. On 500mw as soon as I'm 200m away my RSSI is at 40and it just slowly goes down from there. I think maybe different firmware is reporting different RSSI levels
@AdamGdoesFPV3 жыл бұрын
2 things. Firstly there is a problem with your setup. You should not be on 500mw at 200m. I’ve heard of people being at 10km on 25mw in ideal conditions with a good setup. Secondly are you talking LQ or RSSI, because I’m displaying LQ not RSSi.
@jhughes22863 жыл бұрын
@@AdamGdoesFPV I generally don't use 500mw when flying close freestyle, this was 200m on the way out to max range which seems to be around 2.75-3km
@jhughes22863 жыл бұрын
@@AdamGdoesFPV Yes I agree, I was talking about RSSI being poo to begin with, now I'm talking about LQ being poo at 3km?
@jhughes22863 жыл бұрын
@@AdamGdoesFPV Could you check and see what your RSSI is at like 2.5-3km? I feel like that information could be useful. I see that you're displaying Lq instead, and it's pretty much 100-90, I must be in a very noisy environment I Fail-safe at 3km my LQ is solid at 100 up to 2.5km then it goes to 60-70 and RSSI is 50 at 100m then it shrinks to 35or less at 1km.
@adamlovell232 жыл бұрын
What prop are u running on this video?
@AdamGdoesFPV2 жыл бұрын
Just the stock prop that came with it
@joaoferreira80443 жыл бұрын
will you stop using dragon link ?
@AdamGdoesFPV3 жыл бұрын
No I will continue to use DL. It's super reliable kit and I have it installed on a bunch of planes.
@mandel4889 Жыл бұрын
how did you get the TX output on the OSD ?
@AdamGdoesFPV Жыл бұрын
It's just an OSD element you can add in iNav. On the OSD tab you have to scroll down quite a bit
@mandel4889 Жыл бұрын
@@AdamGdoesFPV ah cant do it on betaflight?
@AdamGdoesFPV Жыл бұрын
@@mandel4889 I believe you can. But I don't fly BF
@Chris-vc1dh3 жыл бұрын
where did you put extra lead to get cg?
@AdamGdoesFPV3 жыл бұрын
I didn’t. Balances without any.
@Chris-vc1dh3 жыл бұрын
@@AdamGdoesFPV MINE NEEDS LEAD
@AdamGdoesFPV3 жыл бұрын
@@Chris-vc1dh you need a heavier battery/HD camera. People have been finding it hard to hit CG on these but with the Osmo action and 7000 4s2p lion pack it’s spot on
@Chris-vc1dh3 жыл бұрын
@@AdamGdoesFPV IF I PUT HEAVIER PACK THEN THE LID WILL NOT SHUT
@AdamGdoesFPV3 жыл бұрын
Just the wrong pack then. ZOHD 7000 4S2p fits perfectly
@skyforce19833 жыл бұрын
Lol that antenna is not 1.3ghz it's 1280ghz totally different channel
@grim-upnorth3 жыл бұрын
I think you mean 1280MHz which is 1.28GHz.... round it up, 1.3GHz I don't see the problem here. Whilst the antenna might indeed be engineered to work best with 1.28GHz, it is in fact very suitable for use on channels that are closely either side of that specific channel. In the same way as you can really only buy antennas for the 5.8GHz "range" of frequencies, these manufacturers tend to make antennas for the 1.3GHz "range" of frequencies.
@AdamGdoesFPV3 жыл бұрын
Joey I can work out if you’re joking or if you’re just a bit confused 🤔
@skyforce19833 жыл бұрын
Hey Adam I just wanted to get your attention and let ya know I like the long range stuff and I wanna see more of it I have the same setup as you already I was joking man