TDDGT Digital Geyser Timer - Programming tutorial

Рет қаралды 54,920

HellermannTyton – Professional Cable Management

Жыл бұрын

Learn how to programme SA's best selling digital geyser timer.
Please note
• All electrical installations should be done by a qualified electrician.
• The maximum current rating is 30 Amps.
• Resistive loads (geysers, under-floor heating and lights)
• Inductive loads (pool pump, air-conditioners).
• Rated Voltage: 220-240V AC
• 20 Programmable Settings
• 15-Day Backup Battery
• IEC 60730 Rated
• 7-Day Digital Geyser Timer (Internal Relay)
• Max 30A (3500 Watts) Resistive Load (Geyser)
• Max 15A (Inductive Load)
• DIN Rail Mounted
• Dual Mount Din and Samite
Learn more by clicking here: www.hellermanntyton.co.za/tdd...
For more information - manuals and operating instructions, click here: www.hellermanntyton.co.za/dow...
Follow us!
• Twitter: / ht_southafrica
• LinkedIn: / hellermanntyton-south-...
• Facebook: / hellermanntytonza
• Instagram: / hellermanntytonsa
For enquiries, please contact : jhb.sales@hellermann.co.za
► Click here to subscribe: bit.ly/HT_KZfaq_Subscribe

Пікірлер: 19

@petcho 8 ай бұрын

What i really needed, good video

@danielrossouw126 5 ай бұрын

How do I delete a time slot that is no longer needed? Press reset and reinput the time and other time slots required?

@JacoLuus 4 күн бұрын

Hi, thank you for the video, how do you set the timer to pulse mode for 15seconds.

@HellermannTyton-Global 2 күн бұрын

HI JacoLuss, thank you for your comment. The Pulse Mode guide can be found on the 2nd page of the TDDGT Operating Manual, click here: www.hellermanntyton.co.za/binaries/content/assets/downloads/za/manuals-and-operating-instructions/tddgt-email-instruction-manual.pdf Best wishes, Nico

@faridulislam969 11 ай бұрын

How to switch to 24hours time settings format ?

@garrethjohnson9787 8 ай бұрын

To change between 24Hr Clock and 12Hr Clock, press and hold the Clock button icon for 5 seconds.

@parthabanerjee6320 6 ай бұрын

@HellermannTyton pls. advice about how to delete any set(both on & Off) of timer program already I've entered and what are the key sequences?

@HellermannTyton-Global 6 ай бұрын

Hi Partha Banerjee, I'll have a response from our product experts soon. Until then, you can check out the instruction manual here: www.hellermanntyton.co.za/downloads/operating-instructions-files/manuals_and_operating_instructions/tddgt_instruction_manual?+not+set-category+not+set-AtMBQc5rDBs-za-comment-tddgt-instruction-manual Best wishes, Nico

@HellermannTyton-Global 6 ай бұрын

Hi Partha Banerjee, sometimes life is very easy: There is a reset button on the timer, this will reset everything including the time and programs. Best wishes, Nico

@meissnerfritz Жыл бұрын

What is the difference between auto on and auto off? Which should it be set to for the timer for to control the geyser? In auto, when the red light is on does it mean the geyser is on or does it just mean that the timer is running?

@HellermannTyton-Global Жыл бұрын

@meissnerfritz, Thanks for your comment. Below I have the information of our Product Manager: When the RED LED is on, the supply to the Geyser is ON. When the LED is OFF, the supply to the Geyser is OFF. ► OFF - The Timer is OFF and the Timer is not running ► AUTO OFF - At this point in time the Timer is OFF and the Geyser supply is OFF. If it is left in this mode, when the next program inside the timer says that it should come ON, it will turn ON, and the geyser will be ON. ► ON - The Timer function is ON. You can also operate the Timer in Manual Mode. ► ON AUTO - At this point in time the Timer is ON and the Geyser supply is ON. If it is left in this mode, when the next program inside the timer says it should go OFF, it will turn OFF, and the geyser will be OFF. Best wishes, Nico

@m2ngwa89 10 ай бұрын

@HellermannTyton-Global we have a solar gesyer attached to the geyser timer but we still find that the electricity is consumed even though the geyser timer has been programmed with on and off times. What can be the cause of this?

@HellermannTyton-Global 10 ай бұрын

Hi @@m2ngwa89, one possible issue could be that the timer is in the ON mode, which means that the geyser will remain on continuously. The timer should be set to AUTO OFF mode. In AUTO OFF mode, the timer settings will control when the geyser turns on and off according to the set times. I hope the response addresses your question. If not, please provide us with more details about your settings by visiting the following link: www.hellermanntyton.co.za/contact?AtMBQc5rDBs-za-comment-contact Best wishes, Nico

@user-eu6lp6zw9u 5 ай бұрын

Can I control toptronic timer remotely?

@HellermannTyton-Global 4 ай бұрын

That depends on how long your arm is. But joking aside, no, you can't adjust the timer remotely. Best wishes, Nico

@momentswithskhanyi8110 7 ай бұрын

Does one have to set it every week?

@HellermannTyton-Global 7 ай бұрын

Hi Moments with S'khanyi, thank you for your comment. The settings you used for the week apply to all the following weeks until you choose to change it However, here you find the manual: www.hellermanntyton.co.za/downloads/operating-instructions-files/manuals_and_operating_instructions/tddgt_instruction_manual?+not+set-category+not+set-AtMBQc5rDBs-za-comment-tddgt-instruction-manual Best wishes, Nico