Teaching an Angle Grinder to Fly

Рет қаралды 2,524,399

Күн бұрын

Sign up to Morning Brew for free today morningbrewdaily.com/ps
▶▶ Support on Patreon: / petersripol
INSTAGRAM: / petersripol
TWITTER: / petersripol
Amazon affiliate links (these help grow the channel, every purchase gets me a small percentage of the sale, it costs you nothing though!)
Make your own Angle Grinder Helicopter 🤡 shorturl.at/cHPS6
Here's some stuff I use in most of my videos:
3D Printers:
▶ CREALITY Ender 3 - shorturl.at/iADO2
▶ LulzBot - shorturl.at/adIJ9
Drones I Like to use:
▶ DJI Mini 3 Pro - shorturl.at/pDMNY
▶ DJI FPV Combo - shorturl.at/gC178
▶ Other DJI Gear - shorturl.at/biC79
Camera Gear I film with:
▶ Main Camera - shorturl.at/aeAZ8
▶ Backup Camera - shorturl.at/ftAE7
▶ Lens - shorturl.at/gzBEO
▶ Camera Mic - shorturl.at/uDIU9
▶ GoPro - shorturl.at/qrAE5
▶ GoPro Max 360 - shorturl.at/dmost
▶ Insta 360 Go2 Cam - shorturl.at/abLOU
▶ DJI Osmo Pocket - shorturl.at/xyJS8
▶ Switchpod Tripod - shorturl.at/dzAIU
Some other great products:
▶ Total Boat Epoxy and Supplies - shorturl.at/ptGT7
▶ Battle Born Batteries - shorturl.at/lmY56
Want to send me something? :D
Peter Sripol
PMB328
3195 Dayton Xenia RD STE 900
Beavercreek, OH 45434
DISCLAIMER:
This video is purely for entertainment value, any and all replications of any experiments, projects, and creations or similar are the sole legal responsibility of the person(s) involved in replicating them. PSproject can not be liable for any information or misinformation, wrongful use, damage to personal property, death or any circumstances that result from replication of any projects seen.
Be safe and use your head people!

Пікірлер: 3 800

@PeterSripol Жыл бұрын

Thanks Morning Brew for my daily news briefing! - Sign up for free here: morningbrewdaily.com/ps

@sohamsinha8288 Жыл бұрын

first

@Unknown-vv1td Жыл бұрын

i just took a huge dump

@baileyjerman5573 Жыл бұрын

Love that the banana and the hotdog both had sparks

@jacaboscrafts7729 Жыл бұрын

Hiw is this coment 13hours old it just came 5 mins a go

@baileyjerman5573 Жыл бұрын

@@jacaboscrafts7729 because when a videos uploaded and when a video goes public

@LexUnown Жыл бұрын

Now we just need a Quadcopter Drone with 4 Anglegrinders as propellors and the insanity is complete.

@ageorgiev89 Жыл бұрын

Already has been done

@berkeli383 Жыл бұрын

@@ageorgiev89 link?

@joakimspazner9052 Жыл бұрын

@@ageorgiev89 sure you don't thinking about rotor riot doing it with small 1milion rpm pensil grinder?

@rasmis Жыл бұрын

I found this on KZfaq. But I'm curious as to the power vs. the weight. Can it lift more than one with regular rotors? kzfaq.info/get/bejne/a7p1fKuG09Sxqmw.html

@reinkarnatsioon Жыл бұрын

estonians did it already kzfaq.info/get/bejne/a7p1fKuG09Sxqmw.html

@nathanielepps Жыл бұрын

I can't even count how many times Peter has set out to make something and I'm like, no way this works, and then of course somehow it works

@michaelcarlisle7713 Жыл бұрын

Lol that's what happens when you're graduated in college and high and now make content that you think I would not work this shouldn't be a surprise he made a drill fly

@russiangoose7053 Жыл бұрын

And this one worked the first time too which is even more crazy and impressive

@bigemugamer Жыл бұрын

@@michaelcarlisle7713 Making an angle grinder fly is not a worthy creation from a college degree, it's something an inbreed hic creates in his living-room-garage provided it doesn't kill him first. Now, the multiple unmanned and manned planes Peter created, that... THAT is what I'd expect from a college graduate. Though to be fair, read this i just posted: "Ya know... one can only upload SO many practical and safe videos SO many times before people say, "this was already done on a dozen other channels", leading one to the conclusion, "one has to create NEW and UNSEEN footage to bring in NEW subs and not lose old subs". Enter the age where Natural Selection no longer exists and millions of otherwise stupid people (dude at 0:44) clamor to subscribe to NEW and UNSEEN content, intelligent and sensible people would not watch." I feel sad for future generations including todays younger generation, they get NO ne content, just content they THINK is new till they discover the old song, movie, or physical device it is based on. =( of course, as you already know, I am just one of millions of you tube commenters who's comments don't matter =P Edit: Just checked out the end of the video... ok ok it actually worked and IS pretty cool. Well played PeterSripol... well played. (stands and applauds)

@cat32643 Жыл бұрын

And it usually works on the first test run.

@dr.crypto6891 Жыл бұрын

I said it before; I'll say it again, Peter you da Man! You can make (almost) anything fly! Cheers and well done!

@tenuhsee1975 Жыл бұрын

You should definitely make a flying dremel. Those things make a LOT of rpm.

@averagememer7068 Жыл бұрын

That’d work with a quadcopter. 4 dremels at the top, and the “cords” going to every arm Edit: I found a video of someone doing this kzfaq.info/get/bejne/o6mWjMxom5mYook.html

@Popcorx Жыл бұрын

@@averagememer7068 maybe 4 dremel motors but not 4 dremels 🤣

@procrastinator1842 Жыл бұрын

Yeah but they make 150w of power...so those rpms will drop to like a few hundred rpm.

@Zeddify Жыл бұрын

HE DID IT!

@buddy5719 Жыл бұрын

@@averagememer7068 false link i got sent to a cooking video

@matthewd1907 Жыл бұрын

Seeing sparks come off a banana and hotdog confused me to my core

@karnobot9814 Жыл бұрын

Those are GMO food rich in Iron as he said!

@jamiehenrybrownpersonal Жыл бұрын

same lol

@wparkerunc Жыл бұрын

@@karnobot9814 you do know that non-gmo food has the same ammount if not more?

@cwill2127 Жыл бұрын

@@wparkerunc it was a joke

@bread9276 Жыл бұрын

Same

@PlasmaChannel Жыл бұрын

This was terrific my man. I'll never look at angle grinders the same. Also that * narrow * escape from death on the first throw was heartstopping haha

@martinbobak3009 Жыл бұрын

I hate horses

@copinahk4549 Жыл бұрын

@@martinbobak3009 Peta, the horse is here.

@MrMilarepa108 Жыл бұрын

I'll never look at BANANAS the same. They weren't kidding when they told us there was a lot of iron in bananas.

@danielbrowniel Жыл бұрын

I would like to see an oscillating tool be used to make an ornithopter. Now that is a real challenge.

@kelseyduerksen6404 Жыл бұрын

Like a sawzall or a jigsaw. That would be hilarious.

@danielbrowniel Жыл бұрын

@@kelseyduerksen6404 I was thinking the oscillating multi tools, they're crazy fast, like 20,000 oscillations each minute.

@ac.creations Жыл бұрын

@@danielbrowniel more power out of a sawzall. It has a transmission to turn the rotation into forward-backward just gotta make another one to turn it back into rotation. Losses galore.

@adenanthony5257 Жыл бұрын

@@danielbrowniel yeah I use a Ryobi one for work and it's a bad mofo

@gabedarrett1301 Жыл бұрын

reciprocating saw, perhaps?

@StinkyBlack1 Жыл бұрын

Absolutely mad. For those who dont know its pretty widely agreed that they are already the most dangerous hand tool, this is really crazy to even be in the room with.

@adamdymke8004 Жыл бұрын

IKR, how does this guys still have his fingers?

@ZombieByte Жыл бұрын

i think you mixed up dangerous with fun

@dustinh4175 Жыл бұрын

More than a chainsaw

@OpalDruscilla 3 ай бұрын

I had one get caught in my shirt once, lucky to be alive

@Billyjoe978 Жыл бұрын

I love all the chaotic nervous laughter as they’re testing their different ideas 🤣

@roopak973 Жыл бұрын

Just the asymmetric aircraft idea deserved it's own video This was a double bonus.😄

@kreterakete Жыл бұрын

German idea

@Full_Throttle_no_Brakes Жыл бұрын

@@kreterakete Was already mentioned in the video it's German

@Ezekiel_Allium Жыл бұрын

@@Full_Throttle_no_Brakes no it wasnt

@omgitsrez Жыл бұрын

@@Ezekiel_Allium Line was "The germans did it" in the vid

@Ezekiel_Allium Жыл бұрын

@@omgitsrez nope

@pauljs75 Жыл бұрын

Got to give it to Peter's bro for being the MVP and walking right into the face of danger for this hair-brained project. Sketchy as all heck, but it was entertaining as well.

@fleacircus4408 Жыл бұрын

MVP? I personally know someone who's lost a finger holding a work piece for someone else to cut with a n angle grinder. Imagine how stupid you'd feel for mangling your brother's hand so you could cut a hot dog for KZfaq views.

@TranceMatzl15 Жыл бұрын

@@fleacircus4408 We wouldn't be here with planes, rockets and helicopters if men didn't do stupid shit like that my man. Brothers putting each other in danger is a tale as old as mankind :D

@pauljs75 Жыл бұрын

@@fleacircus4408 It is stupid, but if somebody puts their own health and safety on the line for you, you'd better treat them damn well outside that situation. It's in that context. Peter owes him one.

@jama211 Жыл бұрын

@@fleacircus4408 there's no need to darken the mood like that, but yes we should be safe

@fleacircus4408 Жыл бұрын

@@TranceMatzl15 You think cutting a hotdog in half for internet views is gonna invent the next rocketship?

@user-jk5es6hi8f Ай бұрын

The guy who did that asymmetric design for this plane is a pure genius.

@spcpitts Жыл бұрын

You should re visit this with a cordless dye grinder. I think mine does 20k rpm.

@ARockyRock Жыл бұрын

Yes.

@damailman8472 Жыл бұрын

Dye grinder could be the stabilizer propellor on a helicopter!

@derrick4804 Жыл бұрын

He chose a low rpm angle grinder on purpose. The propellers can't handle rpm that high.

@gadgetrc94 Жыл бұрын

I didn't realize how much I missed the "making something fly that shouldn't" genre of videos. Thanks for that. Band saw sounds like a fun twin engine. You might have to twist the band to get counter rotating props.

@KableMam Жыл бұрын

I lost my shit when the foods threw sparks 😂

@fairguinevere666 Жыл бұрын

The fun thing with the BV141 is the tail design wasn't because of the asymmetry - it was for the tail gunner! They wanted them to be able to not have to worry about the stabilizer being in the way. It was mocked for its design so never saw production beyond the first prototypes, but filled the role of a single engine scout/bomber that it was designed for pretty damn well in initial testing.

@2587scott Жыл бұрын

Peter, it is incredibly difficult to read the title of this video with out bursting into laughter!!! Well done and thank you for always bringing us joy.

@magatsu82 Жыл бұрын

if you can make an orbital sander fly, you'll be officially the King of RC

@HARMKA Жыл бұрын

Some scary battery operated kitchen tools might fly. Like mixers. But if you can make a belt sander fly...

@GoshkaPolska Жыл бұрын

just looking at the thumbnail and the title this allready sounds like a dangerous idea and I love it.

@laska907 Жыл бұрын

What about your pfp tho lol

@Blox117 Жыл бұрын

next up, flying near powerlines

@ajtheanomaly9764 Жыл бұрын

i am amazed by how little trial and error there was here, idk if its just how youve edited the footage but that seems like a first time pretty perfect effort lmao

@thethinkingtreefrog8061 Жыл бұрын

Peter, you're the reason I know about FAR-103 and have PDFs of the airspace maps for my area saved to my phone. I had given up on my childhood dream of flight and you brought it back. If I had access to the tools and workspace, I'd already be off the ground

@poulsen2946 Жыл бұрын

A bi-anglegrinder plane would be insane and with a better balance, every time i see you come up with a new idea i’m like « obviously it won’t fly » but you prove me wrong every time ahah

@Logan-tk6eh Жыл бұрын

The bi-planeglegrinder

@jong2359 Жыл бұрын

Twin prop beast, please. I would love to see how effortlessly it takes off compared to the single prop off-set.

@Project-Air Жыл бұрын

Ah yes, yeeting a helicopter into the air with a stick inches from one’s face. I know it well 😅 Nice job Peter!

@HarelAvital Жыл бұрын

Love your channels

@SeaWasp Жыл бұрын

This is the second most dangerous tool on the site (second to the operator). You made it fly. This is terrifying, and genius

@ATrustInThrust Жыл бұрын

I bet a circular brushless circular saw would be pretty good.

@reecehudson5913 Жыл бұрын

How about a blowtorch aircraft? I don't know how you'd create thrust from heat but if anyone could figure it out it would be you! Maybe a hot-air-balloon style airship or a mini steam engine? Great vid as always!

@5peciesunkn0wn Жыл бұрын

Ministeam engine sounds hilarious.

@winterwatson6811 Жыл бұрын

i wonder if it would be possible to attach a nozzle to the blowtorch for a makeshift rocket engine

@zacc.attacc Жыл бұрын

good idea, maybe a hot air balloon

@mauirandall8176 Жыл бұрын

the regulations for liquid rocket engines are pretty strict compared to solid rocket engines

@TheLtVoss Жыл бұрын

Mhm a Stirling engine could work fine the main problem with a Propan troch is it needs to move a lot of air to generate thrust but with a fan (electrical driven) prior to a burning chamber it is possible to generate thrust by expanding the air with heat so it gets fast out of the back called hybrid jets

@Djungelskog69 Жыл бұрын

Honestly I would like to see some type of helicopter made exclusively from Home Depot parts.

@bradleywhais7779 Жыл бұрын

Do it yourself :)

@tekvax01 Жыл бұрын

...and you can paint it orange!

@DriverNerdAutomotives Жыл бұрын

8:00 you guys really sucrificed your safety at those parts.

@hamhouke Ай бұрын

I’m impressed with his ability to pilot all this crazy stuff. If you have ever flown an RC plane without gyros and modern stability systems, it ain’t easy on well designed models.This dude? Asymmetrical designs, crazy CGs, ridiculous drag coefficients, violent cg shifts, oscillations , piss poor control surface authority, flexible fuselages, twisting, warping. No problem! It’s impressive the crap he can actually keep in control.

@AuthenTech Жыл бұрын

shout out to morningbrew for not being afraid of sponsoring a fun video like this.

@hitemwiththefork4390 Жыл бұрын

It's always a good day when Peter uploads

@recitationtohear Жыл бұрын

Lets be honest we waited so long for this: kzfaq.info/get/bejne/o6mWjMxom5mYook.html

@ProjectileGrommet Жыл бұрын

I was thinking the same thing

@tias283 Жыл бұрын

Dude especially when he upload twice in one month

@sUASNews Жыл бұрын

Spot on

@kennethjanczak4900 Жыл бұрын

this is great...... everone is into drones, not many into anglegrinders...... as an old machinist i love them.... see them fly makes me lives them even more. Thanks for taking the time to make flying anglegrinder, video and share it...

@arestheking7912 Жыл бұрын

Nice to see a video where you guys make progress at the start. Sometimes the videos just feel like they take a little to long to get to the point but this one was just right!!! Interesting sooner and entertaining. Keep it up I hope to see more videos like these.

@Little_Dog664 Жыл бұрын

Peter needs to make a flying chainsaw. That would be terrifyingly awesome

@bowercreates2999 Жыл бұрын

An Itallian WWII plane design that I think would make a neat electric model plane is the Stipa-Caproni where the main fuselage was basically a hollow tube with the propeller inside of the tube. Some say that the design helped with the development of jet engines.

@iR-80 Жыл бұрын

It was an interwar design (first flew 10/07/1932) not a World War II design but it'd still be neat

@BarneyGumbl3 Жыл бұрын

If I remember correctly they were about as easy to turn as an aircraft carrier, would be a cool video though

@bowercreates2999 Жыл бұрын

@@iR-80 I had been thinking that there were a few used at the very beginning of the war, but now I see that I was wrong. Thanks for pointing that out.

@mike5585 Жыл бұрын

I'm very impressed with how well that first flight went! You guys are awesome!

@loftsatsympaticodotc Жыл бұрын

Peterrrrr !! "even a banana' ?? gimme a break! Since when does abrasive cutting a bananas- 0:22, SHOOT GLOWING STEEL SPARKS ??

@Tallslimchris Жыл бұрын

You probably already noticed this but each time you push the copter wings with the launch pole, you’re inverting the angle of the blades turning all that wanted upward thrust into downward thrust, or no thrust just gravity, but it is a great idea and I think Peter can get it to work, little bit lighter blades with a better angle and “out of box” design,

@moonriseproductions Жыл бұрын

so the best launch would be to hold it high, then just pull the pole down, and run fast

@LaurenceVonThomas Жыл бұрын

@@moonriseproductions or jump off of something

@bmxscape Жыл бұрын

@@moonriseproductions well realistically if it can't take off from the pole on its own it would never sustain flight

@Tallslimchris Жыл бұрын

@@moonriseproductions actually the best launch would be for the copter to slowly gain proper lift and lift itself off the launch platform, the use of the pole should solely be used to stabilize the unit until it can sustain its own lift. Unless it’s purpose or design is to slowly fall like a parachute or a glider, then some form of launch or drop from a secondary unit be required.

@darrenfalconer3267 Жыл бұрын

I don't think they would be inverted, looks more like they are just flexing down. Pushing it up doesn't invert the pitch of the blades. And that's even less likely to happen since he added the small wing. This just looked like it didn't produce enough lift.

@yakacm Жыл бұрын

You can see how happy Peter is to be working with his older bro, pretty damn wholesome if you ask me.

@Catmeat106 Жыл бұрын

What happened to sam

@podulox Жыл бұрын

@@Catmeat106 sam so yesterday... (Sam's OK right? Now I feel bad...)

@yakacm Жыл бұрын

@@Catmeat106 I think he's filming isn't he?

@Catmeat106 Жыл бұрын

@@yakacm idk he was usually in the videos whole recording, haven’t seen him in awhile

@Hue5366 Жыл бұрын

@@Catmeat106 I thought he was a clone

@bigrenegade7121 Жыл бұрын

@PeterSripol If you take the angle end of the grinder and make a small plate to replace it, you will then have the motor running inline with the fuselage making it easier to balance out. Will also give you the full power of the motor.

@841106noel Жыл бұрын

I bought two years ago cessna 182 1400mm foam, radio, bqttery, servos, motor etc. Learn a lot, spend much time with my son on this plane and we tries 5 times and always crash instantly. But YOU can do a plane even from metal grinder!! Thats a skill!!

@nobodynoone2500 Жыл бұрын

Wait till they figure out you can remove it from the case.

@bigwangmark Жыл бұрын

Use two angle grinders to build a tilt rotor aircraft like the osprey. Have the batteries remote mounted in the main fuselage to keep the weight down on the wings.

@lancelotkillz Жыл бұрын

I was thinking the exact same thing

@thejackbox Жыл бұрын

you can see during launch how strong the effect of p-factor on this plane was interesting

@joumaxu2629 Жыл бұрын

I have a challenge for you: Create a "high tech" steampunk plane that uses steam ejector(s) as an engine. (Boiler pressure steam used as moving force) as i have seen those kind of machines but never saw someone trying to use it as an engine in a plane before

@melonprogrammer1828 Жыл бұрын

I love how it struggles the most with the banana

@peraltarockets Жыл бұрын

When I think of something that I probably shouldn't try at home, I can trust that Peter's taken the risk for the rest of us on the internet.

@saffahsaid 4 ай бұрын

Its just amazing. The team is enjoying and having fun while learning.

@Salty_Balls 10 ай бұрын

Several moments where i was sure this contraption was going to claim an eye, a limb, or a life. Bravo, good suspense for an entertaining premise.

@LegalEliminator Жыл бұрын

you guys should try a hand-held router next. some have a more cylindrical/tubular shape so it would be easier to make a sleeker plane with.

@loriamora6202 Жыл бұрын

chainsaw also

@freemanmanfree5719 Жыл бұрын

@@loriamora6202 i remember a popular Mechanics magazine from the 60s that had a dual chain-saw motored (gasoline) airplane capable of supporting a human. I was just a boy, but I wanted to build one.

@MaNNeRz91 Жыл бұрын

"that is a very big shaft... This is a very small hole" I hear that regularly

@acct5910 Жыл бұрын

everything worked far better than I expected, bravo

@KyleJohnson-ny7uu Жыл бұрын

Man, that thing worked like a charm lol

@Demdere Жыл бұрын

Hey Peter - project idea! What if you made a plane without ailerons, and instead had the main wing on a rail that moved the wing left/right to tilt the plane one way or the other, due to the imbalance of lift on either side? To explain it another way: The wing (when moving on the rail in one direction) would be getting longer on one side while getting shorter on the other due to the linear motion on the rail, 90° from the direction of flight.

@rcbinchicken Жыл бұрын

that's a really creative idea, I'd watch the hell outta that

@urmum8540 Жыл бұрын

Sounds like rotational torque would be a big issue

@TheFlyingZulu Жыл бұрын

I think that's how some hang-glides turn... The person shifts their weight and thus moves the center of gravity left or right making the craft roll and turn in that direction.

@netts2315 Жыл бұрын

And have the propeller on a rail too to make an offset in the center of thrust relative to the center of gravity, giving you yaw control :D

@Scrogan Жыл бұрын

Move it forward and back for pitch too? Wing-warping could be interesting also, though the rib design for warping wings may not be trivial.

@schnitzelmedbearnaise Жыл бұрын

What about two(!) angle grinders instead? One on each wing. That would be so bad ass and also symmetrical

@Daniel-fe1uj Жыл бұрын

This went surprisingly better than I thought

@TitanTubs Жыл бұрын

10:25 that was freaking incredible

@Dirtdevil1 Жыл бұрын

Hard to believe what I just witnessed. This guy always creates the ideas I have in my head. Awesome 👌

@LordSainty Жыл бұрын

So we just gonna ignore the sparks from angle grinding a banana??

@Ezekiel_Allium Жыл бұрын

The hotdog though, the sparks were to be expected, obviously

@swakage13x Ай бұрын

Definitely should try this again but take the angle grinder apart so it can sit properly inside the fuselage so the weight can be more evenly distributed

@TesseraktGaming Жыл бұрын

I like the single-bladed helicopter because it reminds me of the zombie chopping blades from Ravenholm in Half-Life 2. Right down to tearing itself off the center and going flying.

@HionV Жыл бұрын

I was thinking the exact same thing lol

@oweeboy8220 Жыл бұрын

I would love it if you could make like a guide or a series about learning to build awesome rc aircraft like this (Not with an angle grinder of course) but like go over the design process, materials, the right electronics and motors, and assembling and wiring everything. Just a suggestion

@awolsurfer6422 Ай бұрын

I’ve never had more anxiety watching a KZfaq video. Great stuff

@aggressive_sandbag Жыл бұрын

this dude can make anything fly

@jn1211 Жыл бұрын

I love how you're completely protecting yourself near the end of the vid!! super safe and not sketchy looking at all!!!!🤣

@pbp6741 Жыл бұрын

The best part was the introduction to an asymmetric aircraft. Fascinating.

@TheMNWolf Жыл бұрын

I am so impressed with this. I didn't think that an angle grinder would have the power to weight ratio to get airborne. I want one. I want one. I want, no, I want two.

@TimTim11111111 Жыл бұрын

Cool rig! If you take the bevel gears off, the motor can sit longitudinally helping out the balance, and the rig will also enjoy a little less mechanical loss. I dont think the gears have any actual reduction, so you're still direct drive.

@baleylavarta2573 Жыл бұрын

What about a Dremel? I've used them for many projects including a mini lathe. I don't see why one wouldn't produce enough thrust to lift a small airplane.

@FuckYouYouFuck Жыл бұрын

A die grinder or router would be pretty awesome. Similar to an angle grinder except the tool points straight ahead instead of 90 degrees to the side, and they can be very high RPM, up to 30,000RPM. I want to see some exploding propellers.

@EmyrDerfel Жыл бұрын

Or just unbolt the gearbox off the grinder, that's making a lot of the noise, and the gearbox mountpoints would be useful for attaching the grinder to the craft.

@918Kustomz Жыл бұрын

DREMEL!

@philb8437 Жыл бұрын

That angle grinder helicopter launch is so incredibly unsafe

@dragonrider4253 Жыл бұрын

Happy 2023 everyone. A wonderful channel I've found.

@jram7047 Жыл бұрын

I would really like to see a semi serious build with gutting the materials that add extra weight and young a higher end angle grinder. This was really impressive

@sfrench1211 Жыл бұрын

Loved the grinder video and I would love to see you make a plane with no visible means of propulsion, like a Dyson fan.

@SouthTexasGhostRider Жыл бұрын

There are already ducted fan rc plane motors.

@sandrainthesky1011 Жыл бұрын

I always wondered if an angle grinder could fly! That was cool, thanks Peter!

@donaldlightbourn7879 Жыл бұрын

Yo 100% shocked how successful that was

@ThomasT Жыл бұрын

0:17 WHY WERE THERE *SPARKS* WHEN YOU CUT THE *HOT DOG*

@johanngambolputty5351 Жыл бұрын

I love the spirit of this flying power tools series, its just the best!

@LusipherStarLine Жыл бұрын

I really didn’t think it would work I’m really impressed that it flew wow

@juicegames2406 Жыл бұрын

Literally this dude can make anything fly... 🙂🙂🙂

@bryantfalk7021 Жыл бұрын

Wow I am impressed at how well that worked out of the gate! So cool. Editing of episode also really tight and moving. Great to watch thank you.

@jakehermann8376 Жыл бұрын

Including the steel hot dog. Not sure if they are just built different or something but I wouldn't want to eat one of those

@AchanCham_ Жыл бұрын

The off-center plane was very impressive! Great video!

@-YELDAH Жыл бұрын

“I mean we’ll try it anyway” famous last words

@MarkThrimm Жыл бұрын

I looked at the title and I was like YES! Now I just need to watch the video. Already liked.

@cliftonmassey3143 Жыл бұрын

Peter have you considered using a variable speed wood router to power a flying machine?

@QBRX Жыл бұрын

Didn't know you would get sparks when cutting through a hotdog. You learn something new everyday.

@aviationexpert8249 5 ай бұрын

BLUD CAN TRANSFORM ANYTHING INTO flying stuff!!! Salute Mannnnnn

@matthommel3546 Жыл бұрын

I think you should make a dual prop one with 2 grinders. So that you can make the weight distribution better. Plus more battery.

@40feetoftrouble Жыл бұрын

I'm really amazed how you always find new ideas for your episodes. A good one, as usual 😄

@ageorgiev89 Жыл бұрын

Probably by looking at old content already made?

@billcar50 Жыл бұрын

That was awesome from start to finish. I was so impressed when the Flyobi flew for the first time.

@prolifeunity Жыл бұрын

I can't believe you didn't think of using gears instead of hooking a propeller straight up to the grinder.

@iand7475 Жыл бұрын

Love it they've got over head power cables right next to shop, adds to the drama !!!

@alanfraser2540 Жыл бұрын

I always look forward to Peter's video's to see what mad creation he comes up with, he always tries and tries again until success. I can't wait to see what he comes up with next. 👍😁

@christosmani Жыл бұрын

Aiming for the stars I see! Cutting edge technology as always! This vid made the cut for me!

@spencerdunn6933 Жыл бұрын

Finally the algorithm nails it. This is exactly what I wanna see.

@Stary_18 Ай бұрын

Omg i love you so much you made the video exactly 15 minutes long

@scottdunbar4898 Жыл бұрын

I need to see a flying band saw. Make it happen, Peter.

@polyhistorphilomath Жыл бұрын

Flying hydraulic press. Flying forge. Flying bucket elevator. Flying calciner.

@vivalarevolucion9 Жыл бұрын

For a single blade helicopter, you need propulsion at each tips of the blade, pointing in opposite direction (to get a clockwise or anti-clockwise movement) ... like they do in China with fireworks flying wheels. The centripetal force helping, it'll stabilize the wing.... but all the weight being at the tips, it'll also increase the possibility that it tears apart.

@leftaroundabout Жыл бұрын

Actually it should be ok with propulsion on only one tip. However you do need a counterweight, so that the center of mass is reasonably far away from the prop so that it can create good torque. The designs in this video didn't have that. Best is of course to use the battery as the counterweight.

@williamcrane8236 Жыл бұрын

@@leftaroundabout Charybdis, McCutcheon's machine, Flying Maple seed. Plenty of examples on youtube of them. Might not be strong enough structurally but looked like his center of rotation was too far off from his center of balance. For the two bladed one I would go with a smaller prop delivering higher speed but less static thrust. I think he got all of the thrust out of the big prop he could but it just wasn't high speed enough especially so close to the center of rotation where plenty of thrust is going in the wrong direction just because Angular moments are wrong. I ran a Monocopter challenge on RCOnline back in 2007, it was fun and I flew them all the time with little cox engines or a Norvel 15 powered one with a wing made of 2 mill coroplast SPAD style. My biggest was the wing from my first Ugly Stick when the fuse wore out. Ran a throttled os 40fp for power. On a still day I could throttle up, take it high, throttle down and let it come back and change altitude. It was a flying oddity. When I started flying Norvels for 1/2A I no longer needed the 25% fuel for the Cox engines, And I put the things up for memories sake. Winning flight from the RCOnline challenge kzfaq.info/get/bejne/mLB1orx_qpjefmw.html

@vivalarevolucion9 Жыл бұрын

@@williamcrane8236 Still easier to use two identical engines/ propulsion system at each tip (rockets, jet or propeller engines, compressed air nozzles etc.) .... allowing more power, redundancy, perfect counterweight and no need for a tail rotor. Good examples: every tip jet helicopters: Saunders helicogyre, the WNF342 V4, the McDonnell XV-1 and my favorite, the Fairey rotodynes.

@carpediemarts705 Жыл бұрын

Huh?

@vivalarevolucion9 Жыл бұрын

@@carpediemarts705 ?huH

@nunyabusiness4651 20 сағат бұрын

Toby "Cut hotdogs, Now wait a minute Peter!" 😅😅

@Lachy_On_Top Жыл бұрын

I have an idea for you, get a bunch of smaller sized Dremel tools and then use them to power props like you used the angle grinder In This video. I think that would be very cool and it would also give an opportunity to make a smaller aircraft with a single prop if you wanted.

@Kartwheelfpv Жыл бұрын

Rotor riot did one as a drone😂