Great video... Can't wait to see what phantom will do to compete...!!!!

Awesome vid!! I got my YD100 from Southern Custom CC

Nice to see inside one thanks 👍

Thanks keep us posted!

Sweet! I want to get one!

Great vid. Loved the teardown

This is a pretty awesome video continue doing more

southern custom cc is legit. i have had his roadrunner 80 kit in for some time. i haul ass in it about 30-35 mph...been in 3 different states with it so far on a cranbrook --hes been working on this engine kit specifically to trump the phantom. loves to talk shop too. definitely a reputable business

Thanks for the Great review,and info.Damned if I knew to rinse the case.Cleaned and greased everything.I even drizzle a bit of oil,a 1/2 teaspoon each side, into the crank bearings and rotate,of course,and let it set to drain.Barely any visible cylinder scratches after 1000 mile check,and I put that down as road dirt sucked in.The next blocks getting rinsed.

OMG, another kit that is so tempting, and doesn't ship to me. Gosh Czech Republic again and again

I'd rather build my own motor great video though I enjoy them you have some great advice and some beautiful riding ground

Can't wait to see that bad boy run

Looking like these kits will be solid, hope they do well when the go on sale 👌👍😎

Thank you for the detailed breakdown of the motor. Looks like a good motor can't wait to pick one up. Intriguing price-point hopefully it will stay that way. Fingers crossed.🤞Keep up the great work.

A minerelli is definitely going to be my next motor, nice video buddy good job!

Good video bro!

Nice deep dive!

Nice work!

I highly recommend a pbgh nockoff carb ive got a 19mm

Good informative vid bud, well spoken.

Honestly you kind of want to have a shield if not you're not going to have crank pressure but only on the outer side of the bearing the inner side of the bearing just because the inside piece could pop out at any time and possibly mess up your crank or get in your cylinder and mess it up more who is Southern customs any links to their website or something for that price it's pretty affordable just to buy one as a complete also I recommend if the motor still taking apart Port match that spacer plate basically put the spacer plate on with a sharpie line it up then just bevel/shave that crank to match that's basic plate looks a lot better than DHL reason why I chose a smolic spacer plate it was a cheaper choice and it looked a lot better quality

I'm told these motors will be available mid February-March from www.southerncustomcc.com Also keep in mind that this is just his target price, personally I predict they will be a priced a bit higher, but I don't know yet. Note: I have some mixed information, I'm not 100% sure if this kit will be the motor only, Or if it will be a full kit. I'll update this when I know for sure.

I would like to buy one of these

When my bt100 blew up I put the bottom end in the bath tub and flushed it wit super hot water and dawn soap. Then i sprayed it with silicone lube to prevent rust and keep the seals from drying out. Got all kinds of crap out of it. I freakin hate that motor but keep spending money on it.

So Cool!

I got one and pz20 fits great ...

Got a Minarelli with the MZ65 you probably ordered. No competition is exactly right. I definitely had a O 💩 moment the first time I throttled up. I have added some Smolik upgrades and ported and polished. That intake is trash the weld snapped and mine is limping on rtv and prayers til my CNC one gets here. But the price point is unbeatable. I ordered the triple40 and had to add the cylinder. Just that was past CCs price. The exhaust is crucial and I hear the the yasuni R or swap shop copy is a much better fit to the back pressure needs of the minarelli. I don’t see myself going back to the triple40 or worse yd100 except for novelty and a headache 🤣

Cool. I bought a budget Minarelli from Ethan, love the vm20 carb with the stock minarelli reed. He puts together a great engine the thing rips.

I have noticed you have gotten a lot of different items to the channel for testing, scooters, bikes , and a bunch of motors. If you need help testing one of these minarelli motors I’m willing to help you out and test it. Yes I know it’s definitely a huge inconvenience but I’m willing to suffer and do this for the community. Let me know. 😆

Noice!

Hey just wanted 2 say i been workn any ol jet bigger with drill bits, if go 2 big fill them with solder and start over. Just thrown that out there!

Where could I find one for sale?

A lot of phantoms are recalled

Seems like a good kit the 6 mm studs is a bummer on the cylinder. But still if it goes for $350 that will be something that I might be interested in. Like the videos and keep it up! How’s the phantom 85? Did something break on it, because I thought that has the second one they sent you.

So I have a PWK carburetor but when I go full throttle while JUST driving it bogs like it's lean whil I'm stopped it does not bog?

Whats the adapter thickness for cylinder

Adjustable main jet in carburator like Bing 10-17mm has would be cool!

Do a review on the ms440 built by Ken Hinson. I just bought one have not used it yet. He tweaks it pretty good he puts a tighter spring in the clutch. He really puts a Ms 440 to an ms440 on steroids.

Please compare the Minarelli based engine to a MS460 (Stihl Cylinder) based engine. I am trying to decide between those two engines. Great job with ALL your videos, Thank You.

Oh and the 5kv magnet is great you can get 15k rpms out it but need a TC magnet from grubee

Have u ever try the 41 chains on these kits ?

I just wanted to throw this out there ..I was looking at the intake bolt pattern..it's calls for 48mm which is for a pz 19 -22...but the Vm20 has a 48mm-50.8mm intake so I'm look further in this........

One last thing for the squish gap... could be made better by not using base gaskets right ..just use ultra grey??

My engine is still making the whining sound. I already check the other parts. The block is the one I didn't check. What could it be?

I just got done riding both of my Motorized Bikes on my channel! Here's a video if ya want to check it out! kzfaq.info/get/bejne/ipenmbyF2teUfGQ.html

I bought a pwk 24 mm carburetor

Can I fit 1 on a yd100 bottom end??

10:55 use an impact screwdriver for that. They're inexpensive and will break that screw loose on a single tap.

Lol " I buy their crap so you don't have to". Thanks for the review, can't wait to see it in action.

A seal on the inside of the crank bearing would be very bad...it would keep lubrication from getting in the bearing. A shield wouldn't be as bad but I would NOT want one on the inside of my crank bearings. A seal on the outside is virtually mandatory...you don't want gases escaping from the crankcase.

You say the difference is not comparable to the china doll but is it enough of a difference to justify trippling the price? One of the best things about this hobby is the cheap price of parts $300 is not cheap imo

Brother you will be sadly disappointed with life span of the miñarelli and it's going to suck for trail riding unless you got a 50-56t sprocket but those motors won't live long the intake will fail very quickly as well you will have to spend $400 to get that motor right and then another $200-$300 on a pipe for you to even get a couple months out of it. I want you to got a motor from Ken hinson a ms460 52mm with a bucket clutch and you will have all the power in the woods you need and it will be just as fast top end as the stage6 I have proof of that now that's the vertical minnarelli no pipe on that miñarelli is bad to they get there power from the pipe and you need a ktm65 ignition to put out the rpms as well I have them all and tried them all. I really would like to see you run a ms 460 52mm the bearings also won't last on a miñarelli like they will on the 460 my ms440 50mm with a mukuni vm24 carburetor catnip supercharged cdi oz magneto and a kx85 pipe was more powerful and topped out at 58mph on a 36t sprocket as the malossi sport vertical minnarelli and the stage6 vertical minnarelli no joke you get the motor I will send you a header and kx85 pipe that will spring mount like it's supposed to and all I ask is you pay shipping and give me a shout-out you can hit me up on Facebook Sean pesano or mechanic on the go. On Facebook easier to get to me by Sean pesano though I wish you luck with that miñarelli but there has been nothing good on life span

Was that a stock piston? Probably why the squish is off!!

La hover like I said dude ditch the g2 reeds If you have a minarelli because the g2 is not as high quality and it’s made for China dolls and the minarelli reeds are made for the minarelli and better quality

That is far too high of a price. I can buy a 125cc for cheaper

Stock engines work just fine. Till Tha fix the 85.. No point fine and aftermarket engine engine if it's worse than the stock China doll. All for more hp, but the won't last.. so that's the point. Just buy a cheap kit and be happy.. Cause there is no way in hell after watching all the KZfaq videos that I would want to buy one of them engines for it only last a few months

There going for 600-800 not worth it