Nice work sir. I really enjoy learning a bit about the science and engineering trade offs behind your products. Kudos.
@calebwagner92223 жыл бұрын
I own 4 HH motors and even if the product video won't fit any of my applications tech videos are always welcome.
@lax2dia1013 жыл бұрын
Thank you..I was one of the many people requesting a 380 specifically for the CR12.
@kennethrobinson90083 жыл бұрын
What pinion are you using? Not sure what pinion was stated in the video. Thanks
@kennethrobinson90083 жыл бұрын
What pinion are you using? Not sure what pinion was stated in the video. Thanks
@datsun4x3 жыл бұрын
Thanks John, I really like that you are taking the time to talk tech again. If you find the time, I'd love yo hear more about the 2800kv 380. I just bought one for my barrage v2 I'm using for an ultralight bastard Jr build
@HANDLE102033 жыл бұрын
I recently bought one of your puller pro V2's and am beyond impressed with the low end control for crawling along with amazing torque and speed. Amazing products right here
@daveTV7 ай бұрын
This motor would be perfect for the new Enduro12 as well then. AWESOME!
@HolmesHobbies7 ай бұрын
Yes, originally made for cr12
@daveTV7 ай бұрын
@@HolmesHobbies what pinion do you suggest to use on a cr12 since we need a 3mm bore pinion?
@RCVOODOO3 жыл бұрын
Nice. Always something new. Killing it 💪
@JDMJDK3 жыл бұрын
I really dig the flywheel effect of the outrunners, I run a stubby “Devolver” 1800 in my Axial 10.3 Rubicon (full weight) on 3s w/ a Mamba X and it is the smoothest truck in my collection. I have a 3300 Puller Pro in my SCX10 Rubi (same electronics) and short of portals to, the difference is night and day, one rips and the other crawls all day.
@jhawk19853 жыл бұрын
I had both versions of the 380 but I gifted the V2 to my brother for his ultra light crawler build and im using the V1 in my Scx24 Monster truck build 😁
@jl_adventures47043 жыл бұрын
Great video as always !
@johnroddy9313 жыл бұрын
Got me one for my sons cr12. Now just waiting on a crawlmaster mini kit
@rezzrollinrc3 жыл бұрын
Awesome tha baby revolver is sick in a yeti jr can am with a 14t pinion thanks mr Holmes ✊🏽
@HolmesHobbies3 жыл бұрын
The v2? I never picked up a jr
@rezzrollinrc3 жыл бұрын
Ooh snap tha man! Yep mr Holmes tha v2 never had a chance to grab tha 2600kv baby revolver but luvin tha 2800kv thanks Rc bro✊🏽
@rezzrollinrc3 жыл бұрын
Mr Holmes u got to do a micro servo ✊🏽🤓 blow reef and nsdrc out of tha water 😉👊🏽
@ashleyconnelley5563 жыл бұрын
Awesome
@faznf13 жыл бұрын
Me like good informative intel 🤙 going to try this motor for sure !!SVS!!
@jerryvolpini79873 жыл бұрын
Huh, what did he say? 😉 Lol, I'll let you figure out the engineering and trust your opinion on what works best for my application. I just bought the regular 380 for my Losi MRC and can't wait to try it out! 👍
@db_motorjoy76782 жыл бұрын
Mine showed up today! Excited to put it into a Yeti Jr. I've been trying to 'crawlify' - goign to see how a Hobbywing 16BL30 does... but probably need to get more ESC soon too.
@db_motorjoy76782 жыл бұрын
Update - yeah that 16bl30 was dog poop for running a revolver haha. SO I snagged me one of those new Mamba Micro X2's and now it's crawling like a boss :) Thanks for your other video regarding settings for the Mamba as well - wasn't revolver specific but with the curves and punch settings you recommended it's much smoother and easier to control. Have to say the AUX Wire with multiple drag brake settings is pretty darn fantastic as well! kzfaq.info/get/bejne/eNtnmJqi37e1kYE.html if you want to see it :)
@troywilliams35355 ай бұрын
I have the 1/12 monster truck I like the idea of the 380 size motor what's a good ESC that would compliment your work
@varmintsniper25514 ай бұрын
I wonder if that will fit in my EXC temper. 🧐
@EdwardRCDrum Жыл бұрын
Hi John, I have a Bully 2 using two of these 380 v2's, two SHV500 LP DIRECT POWER 16V servos and two crawlmaster mini v2 esc's on 3s. I love this rig and it is only used for slow technical crawling but sometimes when both servos are under load they simply just don't have enough power. I know the esc's and servos can handle 4s but I can't find any info on voltage ratings for the 380 v2. In a slow crawling environment like I described can these motors handle 4s? I sure would like to use one 4s battery to power everything. Thanks for all that you do for the RC Industry and thanks for taking the time to make these videos.
@HolmesHobbies Жыл бұрын
Yes, try 4s!
@111johny11 Жыл бұрын
Hi, can the revolver 380 v2 fit an ECX temper gen 2? I'm planning electronics upgrade but i don't know if it will fit there.
@osho59963 жыл бұрын
I'd probably fail professor Holmes' class
@mtzl1930 Жыл бұрын
Thanks for this informative video Mr. Holmes. Always learning new things from you. I have a quick question: How do you compare this new tiny motor with the CrawlMaster BL (10-Pole) 2700kV motor in terms of torque and overall power? Thanks again!
@Moyersteven1 Жыл бұрын
Would this be the best motor for the Axial Capra UTB18 1/18. Would love to buy one. Just want to make sure it fits. If not what one would fit the UTB18. Thank You!
@kenklosson5503 Жыл бұрын
Exo put one in his Capra UTB 18 and it did just fine, he posted a video if you want to watch
@kennethrobinson90083 жыл бұрын
Awesome! Ready to bolt to my CR12! What kind of pinion does it require?
@NorthSideCustomRC2 жыл бұрын
I have a space limited project where tottal length cant be more than 40mm, is this motor length under 40mm?
@idahoredbeard Жыл бұрын
Will the 380v2 fit into an MOA rig lik the Danchee Ridgerock?
@royrodgers32962 жыл бұрын
Would this work for a v1 exc temper? I’d love a nice slow motor but it runs a 380 can brushed motor
@braddahdussifyoumuss5963 жыл бұрын
I need this for my c1 vs410😬
@gregdunn32613 жыл бұрын
Hi you you still involved with grin tech electric wheel convertion ?
@hanau732 жыл бұрын
How to make it fit into a Losi MRC??
@jessicalatex25393 жыл бұрын
Ecx temper is something that really needs that extra oomph.. wheel speed and power.. but then ESC wise the original would most likely have to be replaced. Does this motor work with the new ESC you've made.. 🤔
@clintcollins65402 жыл бұрын
What size pinion would you recommend using in the CR12 assuming the rest of the rig is stock with 90mm tires?
@HBFTimmahh3 жыл бұрын
Hey Joh. Which one of your motors would you recommend for the Axial Ryft. Would like to be able to have some smooth low end speed etc, when in 1st gear, and still rip well in 2nd. I see a few options, but nothing but your Comp motor that has a 5mm shaft.
@makestuffbetter19 Жыл бұрын
Do you know why fewer turns make a motor faster? If so could you do a video on it. I understand that more turns provide more torque but it puzzles me why it goes slower with more turns. I would think a stronger magnetic field would create more speed and torque.
@HolmesHobbies Жыл бұрын
Good suggestion! It is more about Flux density for any given voltage and terminal resistance. It's like a transformer.
@makestuffbetter19 Жыл бұрын
@@HolmesHobbies see that’s what I’m looking for! I’ve looked around and asked all kinds of people.
@keekay_cg32c7.r23 жыл бұрын
Hey question so when I order a puller pro 4274 what can I do to get it pre soldered do I add general soldering on my list?
@gussiebanjos76183 жыл бұрын
I am putting traxxas # 9290 lite kit, in my 2021 bronco On the chassis wiring diagram it shows a red/white lead going to brushed motor, I am hoping that you will have a solution for this.....The wiring diagram is in installation book Page 3. How do we send a signal to know forwards and reverse so the brake lite will work ,and the backup lights too. Thank You Eric
@stompindakka32223 жыл бұрын
What esc would be needed to power a 380v2
@hermelorc60353 жыл бұрын
I´m building a Loops lj70 body on the mst cfx chasis and my crawlmaster sport 540 doesn´t fit under the hood, I need something smaller in diameter and lenght. Do you think that the revolver 380 v2 could be a good motor for a "heavy" trail rig? The body itself is so heavy and I´m runnin rc4wd cast axles, steel wheels... maybe will finish at 3,5 kg or 4. Hope you can help me John! Thank you in advance
@davidbanaszak5623 жыл бұрын
Will it work in a kyosho blizzard 2.0?
@2strokeboys1913 ай бұрын
Hope this comment doesn’t get lost but I just installed a 380 v2 revolver and crawl master mini v3 to my utb18 build. And motor seems to “shake” or “cog” when hitting steep or straight angles. I’m curious if my rig is a little too heavy for the motor or if I just need to do some tuning. (rig weight 2581 grams) Thanks in advance
@HolmesHobbies3 ай бұрын
Can you gear lower? Rig weight is an important factor that causes more strain, tall tires as well.
@2strokeboys1913 ай бұрын
@@HolmesHobbies I will be gearing down the motor pinion once the new one shows up, currently running a 17 tooth so going to try a 13 tooth next and hopefully that helps. I could also drop tire size by about 10mm but anymore than that and they’ll be too small for my wheels base. If it still has issues I can also start removing added brass components till i find a good balance. I appreciate the fast response 👍
@2strokeboys1913 ай бұрын
@@HolmesHobbies so I went from a 15t to a 13t pinion and she is much smoother, might even try a 12t and I think she’ll be perfect. Thank you again 🙏
@driftcraze21383 жыл бұрын
Can I send my BR mini dual ESC to you somehow the brown protective coating on one of the speed controls melted the speed controls wasn't running hot the motors wasn't running hot I'm running team puller 500 13t. when I took the truck apart to clean it I found the plastic of the cables was melted and the wires was exposed. It looks like they need to be unsoldered and a new set put back on but I'm not willing to try that and mess them up. 😅😭😭😳
@maxwellhatkow62093 жыл бұрын
Ive been looking at getting a RGT RC4 V3. Would this motor fit in it? Id love for it to sound like a fighter jet lmao.
@sherwynkarsodimedjo27123 жыл бұрын
Hey guys....question. what is the best budget brushless motor i can purchase for my traxxas revo 3.3 converted to electric...on amazon?
@mikej88323 жыл бұрын
Too much nerd.... Now my brain hurts 😁
@murrijuana28423 жыл бұрын
Just saw that you're supporting Redcat. Redcat have been very vocal about trying to regulate the airspace that hobby grade flyers use. Enjoy the cash you sell out 👏👏👏
@HolmesHobbies3 жыл бұрын
Can't win them all. But I'll work to make RTR rigs better when the chance arises.