Tech Tip: Preventing a Poundage Drop After String Installation on Mathews Bows

Рет қаралды 8,635

29 күн бұрын

Have you ever experienced your Mathews bow's draw eight dropping unexpectedly right after setting up a new set of bowstrings? In this video, join Aaron as he dives into this common issue faced by archers. Discover the reasons behind this drop and learn how to correct it to consistent performance from your bow.
For any other questions or information on GAS Bowstrings, visit our website at www.gasbowstrings.com

Пікірлер: 25

@Aldocello1 27 күн бұрын

Exact issue I had two weeks ago with my first time ever changing my own strings / cables , Phase 4 33 . Called Gas , Aaron got on the phone and set me right ... All measurements and poundage back to spec, cam timing perfect . Best customer service you could ask for . Since then have also changed strings and cables on my Phase 4 29 and my Triax , no issues , Aarons direction made it easy ....

@pennyontrack 18 күн бұрын

Great video. Never heard of this before

@torreyintahoe 18 күн бұрын

Surprising that rolling that looped end would make that kind of difference.

@wcwcgarner2717 29 күн бұрын

I love my gas strings on my Mathews V3X I have put 1k shots through them no stretching. I am pulling 78# on 75# mods No Twisting the cables

@robbydallis760 29 күн бұрын

I would love for you to post some pics of what the twist in the cables normally should look like on both ends.

@JeffJenkins-f8j 29 күн бұрын

Awesome info, thanks for the excellent support!

@MrGagliano2413 29 күн бұрын

Awesome video! thanks for taking the time to share this!!

@crarchery134 29 күн бұрын

Thanks for the video Aaron Took this advice from you the other day, everything is spot on now!!

@veenma1 29 күн бұрын

Perfect video. Many thanks for sharing the proper technics. Fantastic

@royhoglund1322 29 күн бұрын

Great tips! Thanks for sharing.

@toothlessarcher 29 күн бұрын

Really good information! Thanks!

@budekai 29 күн бұрын

This is a great tip. I haven't seen this anywhere

@Bowsonthebrain 29 күн бұрын

So helpful! Thanks guys !

@PennNative 29 күн бұрын

thank you very much for this. Idk why i never thought of that. . great tip.

@jeffspencer7489 25 күн бұрын

great video. Would be nice to,put instructions or link in package.

@CMac0517 29 күн бұрын

Awesome video! I've had three sets of "Match" strings on my 29.5" Lift and the poundage drops several pounds after several hundred shots. I just ordered Y'all's strings for it yesterday!

@pennyontrack 18 күн бұрын

Did you buy those strings??? I’m still using my match/zebra strings on my lift but have a gas set ready to go on

@liamboyle9199 29 күн бұрын

Well, I certainly didn't even consider this😂 I will be adding this to my knowledge base

@markcook8956 15 күн бұрын

Will this work on the TRX also

@darqueING 29 күн бұрын

Is there also such a Trick for PSE ? After installing my last set of Gas Ghost string my poundage Wenn down to 67 pound and there is now a 1/8 inch Distance to the stringstopper

@dirtjunkie2749 28 күн бұрын

I assume you would do the same procedure with the yoke cables, as far as putting rolls into the loops? Is there a similar affect to draw weight with the yokes being rolled up vs having unrolled from install/shipping? Ive heard of micro adjusting timing on mathews with yoke loops. Your insight is appreciated.

@poppasmurf15 29 күн бұрын

If this is put into the loop that connects to the yoke splitter…. It seems like the tension of the cow hitch is all it’s got to hold it….. wouldn’t that work it’s way out over time?

@EricGriggs-f6r 29 күн бұрын

Actually, the tension that is on the cable is all that’s needed to hold the rolls in place.

@Sneakyjoe69 29 күн бұрын

Just tried this and completely jacked my bow up . I got like 1 pound difference and severely put it out of time . Lame

@EricGriggs-f6r 29 күн бұрын

If your open ends are already rolled and if done correctly and the same on both ends, it shouldn’t mess up any timing. You may still have to make small adjustments to the loop end of the cable to fine tune the timing. Also, not all string manufacturers build their cables to be rolled up in this area. For those that do, this is the most effective way to make major changes.