No video

Tech Tip: Proximity Sensors for Object Detection from AutomationDirect

  Рет қаралды 244,863

AutomationDirect.com

AutomationDirect.com

Күн бұрын

www.automation... (VID-PX-0006) - Learn about the different kinds of proximity sensors or proximity switch for object detection and which is best for your application.
The quick disconnect cable with the diagnostic LED used in this video is an "EVCxxx" part number.
To learn more visit www.automation...
Check out all of our videos at www.Automation...
To subscribe: www.youtube.co...
Facebook: / automationdirect
Twitter: / automationdirec
LinkedIn: / automationdirect
**Prices were valid at the time the video was released and are subject to change.
Related AutomationDirect.com part numbers: AE1-AN-1A,AE1-AN-1F,AE1-AN-1H,AE1-AN-2A,AE1-AN-2F,AE1-AN-2H,AE1-AN-3A,AE1-AN-3F,AE1-AN-4A,AE1-AN-4F,AE1-AN-5A,AE1-AN-5F,AE1-AP-1A,AE1-AP-1F,AE1-AP-1H,AE1-AP-2A,AE1-AP-2F,AE1-AP-2H,AE1-AP-3A,AE1-AP-3F,AE1-AP-4A,AE1-AP-4F,AE1-AP-5A,AE1-AP-5F,AE6-AN-3A,AE6-AN-3F,AE6-AN-4A,AE6-AN-4F,AE6-AP-3A,AE6-AP-3F,AE6-AP-4A,AE6-AP-4F,AE9-10-1A,AE9-10-1F,AK1-A0-1A,AK1-A0-1H,AK1-A0-2A,AK1-A0-2H,AK1-A0-3A,AK1-A0-3H,AK1-A0-4A,AK1-A0-4H,AK1-AN-1A,AK1-AN-1H,AK1-AN-2A,AK1-AN-2H,AK1-AN-3A,AK1-AN-3H,AK1-AN-4A,AK1-AN-4H,AK1-AP-1A,AK1-AP-1H,AK1-AP-2A,AK1-AP-2H,AK1-AP-3A,AK1-AP-3H,AK1-AP-4A,AK1-AP-4H,AK9-05-1A,AK9-05-1H,AK9-10-1A,AK9-10-1H,AM1-A0-1A,AM1-A0-1H,AM1-A0-2A,AM1-A0-2H,AM1-A0-3A,AM1-A0-3H,AM1-A0-4A,AM1-A0-4H,AM1-AN-1A,AM1-AN-1H,AM1-AN-2A,AM1-AN-2H,AM1-AN-3A,AM1-AN-3H,AM1-AN-4A,AM1-AN-4H,AM1-AN-5H,AM1-AP-1A,AM1-AP-1H,AM1-AP-2A,AM1-AP-2H,AM1-AP-3A,AM1-AP-3H,AM1-AP-4A,AM1-AP-4H,AM1-AP-5H,AM6-AN-3A,AM6-AN-3H,AM6-AN-4A,AM6-AN-4H,AM6-AP-3A,AM6-AP-3H,AM6-AP-4A,AM6-AP-4H,AM9-05-1A,AM9-05-1H,AM9-10-1A,AM9-10-1H,APS25-8M-E-D,APS25-8S-E-D,APS4-12M-E1-D,APS4-12M-E2-D,APS4-12M-E-D,APS4-12M-Z-D,APS4-12S-E1-D,APS4-12S-E2-D,APS4-12S-E-D,APS4-12S-Z-D,AT1-A0-1A,AT1-A0-1H,AT1-A0-2A,AT1-A0-2H,AT1-A0-3A,AT1-A0-3H,AT1-A0-4A,AT1-A0-4H,AT1-AN-1A,AT1-AN-1H,AT1-AN-2A,AT1-AN-2H,AT1-AN-3A,AT1-AN-3H,AT1-AN-4A,AT1-AN-4H,AT1-AP-1A,AT1-AP-1H,AT1-AP-2A,AT1-AP-2H,AT1-AP-3A,AT1-AP-3H,AT1-AP-4A,AT1-AP-4H,AT9-05-1A,AT9-05-1H,AT9-10-1A,AT9-10-1H,AW-MAG,CK1-00-2H,CM1-AP-1H,CM1-AP-2H,CR1-00-2A,CR1-ADPTR,CR5-AN-1A,CR5-AN-1F,CR5-AN-2A,CR5-AN-2F,CR5-AP-1A,CR5-AP-1F,CR5-AP-2A,CR5-AP-2F,CR8-AN-1A,CR8-AN-1F,CR8-AN-2A,CR8-AN-2F,CR8-AN-3A,CR8-AN-3F,CR8-AP-1A,CR8-AP-1F,CR8-AP-2A,CR8-AP-2F,CR8-AP-3A,CR8-AP-3F,CT1-00-2H,CT1-AN-1A,CT1-AN-2A,CT1-AP-1A,CT1-AP-2A,CT1-CN-2A,CT1-CP-2A,CTV-00-2M,DR10-AN-1A,DR10-AN-1F,DR10-AN-2A,DR10-AN-2F,DR10-AP-1A,DR10-AP-1F,DR10-AP-2A,DR10-AP-2F,LF40-0P-1H,LF40-0P-2H,LF40-AP-1H,LF40-AP-2H,PBT-AP-1H,PD1-AN-1A,PD1-AN-1F,PD1-AN-3A,PD1-AN-3F,PD1-AP-1A,PD1-AP-1F,PD1-AP-3A,PD1-AP-3F,PFK1-AP-4H,PFK1-BN-1H,PFK1-BN-2H,PFK1-BN-3H,PFK1-BN-4H,PFK1-BP-1H,PFK1-BP-2H,PFK1-BP-3H,PFK1-BP-4H,PFM1-AP-4H,PFM1-BN-1H,PFM1-BN-2H,PFM1-BN-3H,PFM1-BN-4H,PFM1-BP-1H,PFM1-BP-2H,PFM1-BP-3H,PFM1-BP-4H,PFT1-AP-3H,PFT1-AP-4H,PFT2-AP-3H,PFT2-AP-4H,PKW-0N-1H,PKW-0N-2H,PKW-0P-1H,PKW-0P-2H,PKW-AN-1H,PKW-AN-5A,PKW-AN-5H,PKW-AP-5A,PKW-AP-5H,PKWnotes,PMW-0N-1H,PMW-0N-2H,PMW-0P-1H,PMW-0P-2H,PMW-AN-5A,PMW-AN-5H,PMW-AP-2H,PMW-AP-5A,PMW-AP-5H,PNK6-AN-3A,PNK6-AN-3H,PNK6-AN-4A,PNK6-AN-4H,PNK6-AP-3A,PNK6-AP-3H,PNK6-AP-4A,PNK6-AP-4H,PNK6-CN-3A,PNK6-CN-3H,PNK6-CN-4A,PNK6-CN-4H,PNK6-CP-3A,PNK6-CP-3H,PNK6-CP-4A,PNK6-CP-4H,PNK-AN-3A,PNK-AN-3H,PNK-AN-4A,PNK-AN-4H,PNK-AP-3A,PNK-AP-3H,PNK-AP-4A,PNK-AP-4H,PNK-CN-3H,PNK-CN-4A,PNK-CP-3A,PNK-CP-4A,PNK-CP-4H,

Пікірлер: 149
@AMHASSAAN
@AMHASSAAN 7 жыл бұрын
Very useful, keep it up, thank you very much
@automationdirect
@automationdirect 7 жыл бұрын
Thank you for watching - we're happy we could help!
@automationdirect
@automationdirect 4 жыл бұрын
BTW, Did you know we have over 1000 videos like this at www.automationdirect.com/videos and www.automationdirect.com/cookbook?
@abrehamish
@abrehamish 2 жыл бұрын
Short and informative video
@automationdirect
@automationdirect 2 жыл бұрын
Thanks for the feedback! Did you know we have over 1500 automation tutorial videos like it at: www.automationdirect.com/videos ........................ by topic www.automationdirect.com/cookbook .................. by subject
@633r
@633r 8 жыл бұрын
Thank you for this video. Very helpful for project
@automationdirect
@automationdirect 8 жыл бұрын
Thanks for watching - we are happy we could help!
@pl4834
@pl4834 4 жыл бұрын
Awesome video explanation, thank you!!
@automationdirect
@automationdirect 4 жыл бұрын
Thanks for the feedback! Did you know we have over 1000 automation videos just like it at www.automationdirect.com/videos and a video tutorial cookbook at www.automationdirect.com/cookbook? Check it out!
@colinthomas6148
@colinthomas6148 5 жыл бұрын
Thank you for useful information, i want a proximity sensor to dectect the rpm of a bolt and i once the rpm is reduced i want the linear actuator to work with the help of arduino. what kind of sensor should be best for it?
@automationdirect
@automationdirect 5 жыл бұрын
Hi Colin, we would have to understand more about your application to answer this. You best bet is to contact our free support during regular business hours - they will be happy to help you. See the contact info at the end of the video.
@gsharmand
@gsharmand 4 жыл бұрын
I want to detect very small metallic objects like screws , nails, washers 1-2 mm dia embedded in rubber-foam material that is moving 0n a conveyor. The sensor should be as large as possible (50 mm or higher). The sensing distance should be about 30 mm. Kindly suggest
@automationdirect
@automationdirect 4 жыл бұрын
You can actually do this yourself. Just go to the AutomationDirect website, and in the left column select sensors, then proximity sensors. Now in the left column you can select all the features you want. This quickly gets you to the part number you need.
@sathishvellappan9342
@sathishvellappan9342 3 жыл бұрын
I have one rupper part both top and bottom diameter is variation 0.1mm but pitch is vary what type of sensor to be detect
@automationdirect
@automationdirect 3 жыл бұрын
Hi Satish, It's hard to say given this description. I would encourage you to contact out Free Tech Support - they will be happy to help you figure that out (Assuming it is an AutomationDirect part, of course).
@rakshithb5806
@rakshithb5806 Жыл бұрын
Looking for the next video on magnetic proximity sensors but can’t seem to find it. Can you share the link? Are magnetic proximity sensors primarily used for safety door interlocks? have a rectangular tray held in place with two magnetic arms (The two shorter sides of the rectangular tray sit on the two magnetic arms). There are cases when the tray can move upwards (away from the arms). Can a magnetic proximity sensor pointed at the top of the tray detect motion of the tray when it moves away from the magnetic arm momentarily? Thinking about mae-ap-1f
@automationdirect
@automationdirect Жыл бұрын
Rakshith, You can find our sensor videos on this link: www.automationdirect.com/videos/home?t=link&cat1=26 You may only need an inductive proximity sensor to detect when the tray is in place and when it has been lifted away from the magnets. If the tray is made of ferrous metal (steel) an inductive proximity sensor will detect the trays presence or absence. Other factors would be round vs rectangular, voltage, and sensing range. If you need further assistance selecting a sensor, our free, award winning technical support can guide you with the selection. community.automationdirect.com/s/contactsupport
@mukeshbaskaran9871
@mukeshbaskaran9871 2 жыл бұрын
which proximity sensor will be best ?
@automationdirect
@automationdirect 2 жыл бұрын
That's a wide open question which depends heavily on your applciation. Try this: Go to www.automationdirect.com. On the left select sensors >> Proximity Sensors Now use the check boxes on the left to narrow down your search results. If you still need help after that, contact our FREE tech support. www.automationdirect.com/adc/contactus/contactus
@abhinandanadake3696
@abhinandanadake3696 4 жыл бұрын
for measure the gap around 50mm by blinking the signal of big bulb to see the operator , which type of proximity i shall be used. please help.
@automationdirect
@automationdirect 4 жыл бұрын
Hi Abhunandan, Just go to the AutomationDirect.com website and search for "Proximity Sensor." Then on the left scroll down to the sensing distance category and select the sensing distance you need. You will be presented with all of your options.
@jeremycook4670
@jeremycook4670 2 жыл бұрын
So they use these for speed detection and abs systems?
@automationdirect
@automationdirect 2 жыл бұрын
You can use them for whatever you want. Once you understand the basics, the rest is up to your imagination!
@anita.d.harapanhalli5150
@anita.d.harapanhalli5150 2 жыл бұрын
Ya it's or speed and many detection nice question
@anita.d.harapanhalli5150
@anita.d.harapanhalli5150 2 жыл бұрын
Nice question
@sathishkumar-ld2qi
@sathishkumar-ld2qi Жыл бұрын
Very helpfull for in my feature
@automationdirect
@automationdirect Жыл бұрын
Thank you. Make sure to check out more of our videos at www.automationdirect.com/videos/home
@sv843
@sv843 5 жыл бұрын
hello sir, Proximity sensors how much distance of the object can be detect? Will it detects humans?
@automationdirect
@automationdirect 4 жыл бұрын
S V, different style sensors have different range detections. If you are wanting to detect humans, a photo electric sensor may work best. AutomationDirect offers hundreds of different style sensors. Thank you for watching our sensor video.
@sv843
@sv843 4 жыл бұрын
@@automationdirect thanks you sir....
@jegsawu6434
@jegsawu6434 4 жыл бұрын
Very informative and helpful video!! I have a question though, I know the capacitive sensor is capable of detecting any objects that has a dieletric constant greater than air but can it MEASURE its change of capacitance once it detects a non-conductive material?
@automationdirect
@automationdirect 4 жыл бұрын
Hi Jeg, These are just on-off devices - you can't measure the change in capacitance.
@ronalddavis9256
@ronalddavis9256 5 жыл бұрын
I have proximity sensor that senses gear teeth and in turn in moves a cable out a set amount but the technician said the PLC and sensor are not reading the same value so he increased the value in the control and said basically I would have to live with it like that. Help ! Having problems ever since he did that
@automationdirect
@automationdirect 5 жыл бұрын
Hi Ronald, That's difficult to answer without knowing more about your application. Please contact our FREE Tech Support - They will be happy to help you: www.automationdirect.com/support
@microheliaddict
@microheliaddict 4 жыл бұрын
Thanks for useful video. What sensor would you recommend for film base substrate? I need something that can be used for detecting motion picture film eg. super 8, 16mm, 35mm etc.
@automationdirect
@automationdirect 4 жыл бұрын
That's a pretty wide open question. What distance? Contact or non-contact? transparent or opaque? How Fast does sensor need to respond? etc ... Too much to answer here. Please contact our free support team during regular business hours. They will be happy to help you. You can see all of your support options here: kzfaq.info/get/bejne/f8mSepp5sN7egnk.html
@microheliaddict
@microheliaddict 4 жыл бұрын
@@automationdirect Thanks for your reply. Probably around 5-10mm distance, non-contact, film base is transparent but has a photosensitive emulsion on top of it en.wikipedia.org/wiki/Film_base. Response time probably under a second is fine. Would also need to be small package size. I have tried a 1-5 mm capacitive proximity sensor but does not detect the film at all and assume because it is because it is very thin/semi-transparent?
@mycaribeat
@mycaribeat 3 жыл бұрын
Hi, What would be the best sensor to use to dectect basketball? I would like record each made basketet into a database via bluetooth.
@automationdirect
@automationdirect 3 жыл бұрын
Hi John, I wouldn't use a proximity sensor. They are typically too short range - you will want something that detects across the 20" hoop. And since ultra sonics are sensitive to vibration, the impact of the ball might mess those up too. Also, you didn't state if this basketball hoop was indoors or outdoors - that makes a big difference too. My preference would be a beam break optical sensor - possibly fiber-optic - but with out knowing more about your application I can't really define which one you would want to use. Please contact our free tech support - they will be happy to walk you through it. Go here to see your options: support.automationdirect.com/ (look in the upper right corner for the "contact us? box)
@amjidali3826
@amjidali3826 4 жыл бұрын
I am sonny from China, I need your guidance for choosing sensors and motors for my project. I want to detect paper(banknotes) and then i need to trigger the motor to open the gate/ door of storing place.
@automationdirect
@automationdirect 4 жыл бұрын
Would love to see your project. Thanks . You are entered in the giveaway. Make sure to subscribe to our channel to be notified when the winners are announced. Click here to subscribe goo.gl/eNbFdr
@Bozojimmy
@Bozojimmy 5 жыл бұрын
i would like to detect the end of roll using proximity sensor. SO if the paper roll runs out of paper i want to immediately set a trigger. which sensor can i use ?
@adcpreviews1727
@adcpreviews1727 5 жыл бұрын
AutomationDirect has a number of different types of sensors that would work for your application. Photoelectric, ultrasonic, contrast, etc ... It's hard to give you guidance without knowing more about your application. Please call our FREE Tech Support during regular business hours - they will be happy to help you. 1-800-633-0405.
@Bozojimmy
@Bozojimmy 5 жыл бұрын
@@adcpreviews1727 do you have international sales ?
@automationdirect
@automationdirect 4 жыл бұрын
You can find our list of international sales in your area at: www.automationdirect.com/adc/international/international
@automationdirect
@automationdirect 4 жыл бұрын
Thanks for the comment Bozo.
@user-rf3ms4co9f
@user-rf3ms4co9f 2 жыл бұрын
How do working proximity sensor? Can you explain to me or making a vedio.
@automationdirect
@automationdirect 2 жыл бұрын
Great suggestion - We'll add it to our list of videos to create!
@BondmeJesus
@BondmeJesus 2 жыл бұрын
does this series circuit work for npn nc
@automationdirect
@automationdirect 2 жыл бұрын
Depends on the sensor, but yes, most have that option. Try this: 1. Go to www.automationdirect.com 2. On the left bar click Sensors/Encoders 3. Choose one of the Proximity Sensors 4. On the left, you can now check "N.C." and "NPN" 5. You will now see all the Proximity sensors that meet your needs!
@richardkhyriem9632
@richardkhyriem9632 7 жыл бұрын
hello,i need to know which sensors can give the exact reading on display for example, 17 persons with a gun at the same time they shoot at the board which is around 20 meter far away from them and i need only the hitting bullets to show or count it in display .
@automationdirect
@automationdirect 7 жыл бұрын
Hi Richard. Thank you for watching! For technical questions like this, please contact our free award winning tech support. They are setup to give you the most efficient and quickest support. Phone: 1-800-633-0405 Email: www.automationdirect.com/adc/Form/User/TechInquiry Support: support.automationdirect.com/ Please let us know if you have any other questions! Thanks, AutomationDirect
@753bowie
@753bowie 3 жыл бұрын
hi question: what kind of sensor ( not proximity switch ) would you use for example if you have 2 metallic objects in close contact with each other and you want to activate an alarm and a warning light when these two objects get separated and not in contact anymore? thank you
@automationdirect
@automationdirect 3 жыл бұрын
You want to detect when two metal objects aren't touching? Why not just treat it like any other switch/contact? No sensor required, just connect them to a PLC input like you would a normally open switch.
@753bowie
@753bowie 3 жыл бұрын
@@automationdirect appreciate it but this sensor will be installed on a pickup truck not in automation if you could help me with that I will appreciate it
@automationdirect
@automationdirect 3 жыл бұрын
@@753bowie Hmmm ... sounds like this requires further discussion. Contact our free tech support - they will be happy to dig into it with you. You can call, fax or email them. Go here for details: support.automationdirect.com/
@budiyanoor3052
@budiyanoor3052 2 жыл бұрын
Bisa kah proximity sensor di jadi kan alat metal ditektor terima kasih
@automationdirect
@automationdirect 2 жыл бұрын
Can the proximity sensor be turned into a metal detector? Inductive proximity sensors are designed to detect the presence of ferrous metals. Using them as a "metal detector" could possibly be achieved but will be limited to the sensing distance of the selected sensor. If you have technical questions about our products and your potential application, you can contact our free award winning technical support here: community.automationdirect.com/s/contactsupport
@Brutishh
@Brutishh 7 жыл бұрын
Really awesome kowledged video...voice is clear and the video is soo clear...Tqs alot...But i have a doubt that...whether we can detect either PNP or its NPN by just looking at the sensor?
@automationdirect
@automationdirect 7 жыл бұрын
Thank you for watching! For technical questions like this, please contact our free award winning tech support. They are setup to give you the most efficient and quickest support. Phone: 1-800-633-0405 Email: www.automationdirect.com/adc/Form/User/TechInquiry Support: support.automationdirect.com/ Thanks, AutomationDirect
@jaganrajesh6724
@jaganrajesh6724 6 жыл бұрын
Very useful material good
@automationdirect
@automationdirect 6 жыл бұрын
Thanks for the comment. I am glad you found it helpful. Have a great day.
@abasjabr7573
@abasjabr7573 6 жыл бұрын
I am planning to build rewinding fan machine .thanks for help.
@automationdirect
@automationdirect 4 жыл бұрын
Thanks! Did you know we have over 1000 videos just like it located here: www.automationdirect.com/videos
@TinoBamBeano
@TinoBamBeano 4 жыл бұрын
Thank you! Very helpful! Thanks from HTM sensors!
@automationdirect
@automationdirect 4 жыл бұрын
Thanks Tino! Did you know we have over 1000 automation tutorial videos just like it at www.automationdirect.com/videos and www.automationdirect.com/cookbook? Check it out - there's lots of good stuff there!
@TinoBamBeano
@TinoBamBeano 4 жыл бұрын
@@automationdirect awesome! Thanks for the link!
@naqiyudin94
@naqiyudin94 5 жыл бұрын
hi im working on my final year project. planning to detection of object's vibration that fall down from high place and monitoring the localization in real time. what sensor should i use?
@automationdirect
@automationdirect 5 жыл бұрын
That is difficult to answer without knowing more about your application. Please contact our free tech support team - they will be happy to help you. Tech Support Options: www.automationdirect.com/support
@amjidali3826
@amjidali3826 4 жыл бұрын
I am sonny from China, I need your guidance for choosing sensors and motors for my project. I want to detect paper(banknotes) and then i need to trigger the motor to open the gate/ door of storing place.
@dr.imayavarambanmunuswamy808
@dr.imayavarambanmunuswamy808 2 жыл бұрын
Nice, Many thanks Sir.
@automationdirect
@automationdirect 2 жыл бұрын
Thank you, we are glad that you found the video beneficial.
@taki7884
@taki7884 5 жыл бұрын
Can i increase the range of an inductive sensor? Im using the unshielded one. 3 pins.
@automationdirect
@automationdirect 5 жыл бұрын
Hi Bryan, Inductive sensors really depend on the type of metal being detected so you could optimize what you are detecting to help a little bit. Other than that, there really isn't much you can do to increase the range other than buy an extended range inductive sensor.
@richellepark9835
@richellepark9835 6 жыл бұрын
can a capacitive sensor detect plastic, metal, paper and food waste. please answer , need your response .for my thesis
@automationdirect
@automationdirect 6 жыл бұрын
Thanks for the comment, Richelle Park. A capacitive sensor will detect any object that meets it's sensing size and has a dielectric different than air. Since very few things have the same dielectric as air, I have always looked at a capacitive sensor, as the "everything and the kitchen sink" sensor. I have used this sensor, to sense all the objects that are in your list. The two factors that give a disadvantage to capacitive sensors, are the effect temperature and environmental changes has to the accuracy, and the last being that the overall accuracy is not as high as let's say inductive sensors. Now the technology around capacitive sensors, in years of late, have reduced these disadvantages greatly. I hope this has helped in your research. Have a great day!
@vikiwaran7977
@vikiwaran7977 5 жыл бұрын
For underwater to detect object what kind of sensor i want use?
@automationdirect
@automationdirect 5 жыл бұрын
Hi Viki, I don't think we have any underwater sensors, but just to be sure, please contact our free tech support during regular business hours - they will be happy to help you.
4 жыл бұрын
Great video, Thank you for that. You should have had more subscribers. Just subscribed. ;)
@automationdirect
@automationdirect 4 жыл бұрын
Thanks for the subscribe! Did you know that we have over 1000 videos like it at: www.automationDirect.com/videos and www.automationdirect.com/cookbook
@automationdirect
@automationdirect 4 жыл бұрын
Thanks Tomas for your support.
@tadeleaemiro8087
@tadeleaemiro8087 4 жыл бұрын
very helpful thanks
@automationdirect
@automationdirect 4 жыл бұрын
You are welcome! We have over 1100 automation videos like it at: www.automationdirect.com/videos (random search), and www.automationdirect.com/cookbook (by subject) Check it out!
@jafferkhan5598
@jafferkhan5598 6 жыл бұрын
So helpful vedio thank you But I want to know which sensor that identifies that different types of metal
@automationdirect
@automationdirect 6 жыл бұрын
Thank you for the comment Jaffer Khan. If you are looking for a sensor that can detect all metals, then you are looking for an inductive prox sensor. If you are looking for a way to sort dissimilar metals, there are a few different solutions and methods out there. I am not experienced in this field, but one article I read about can be found here: ieeexplore.ieee.org/document/1631554/
@sksahadatali4410
@sksahadatali4410 5 жыл бұрын
Sir how can I make proximity sensor as distance measuring device??? Plz help
@automationdirect
@automationdirect 5 жыл бұрын
@Sk Sahadat Ali, if you are looking for distance measurement you are looking for something with an analog output. The things to keep in mind when specifying a distance measurement device, is the distance you will be measuring across, the material you are detecting and the type of output your device needs (ie. 4-20mA, 0-10VDC, 0-5VDC etc)
@turbo3089
@turbo3089 5 жыл бұрын
Can you tell me what the next video is going to be called with the magnet sensors. Cant seem to find it
@automationdirect
@automationdirect 5 жыл бұрын
The video is referring to this: kzfaq.info/get/bejne/nZ57eqhk1LndiIU.html. FYI: You can find all of our tutorial videos (There are over 1000) at www.automationdirect.com/videos.
@annie-ne3gy
@annie-ne3gy 2 жыл бұрын
Hello! Can I ask which sensor should I use if I want to detect different types of plastic (PET, PVC etc)? They have different wavelengths but I'm not sure which sensor to use for detecting them separately. Also, from where can I get it? Thank you!
@automationdirect
@automationdirect 2 жыл бұрын
Capacitive and Ultrasonic sensors will both detect plastics. The distance of the mounted sensor from the detection target will determine which sensor style to choose. It would be best to contact our technical support or our community page for help selecting a sensor for your application. You can find the contact information on our page here: community.automationdirect.com/s/contactsupport You can order sensors from our webpage at AutomationDirect.com. We only ship to North America. If you are outside of our area, you can contact one of our international VARs here: www.automationdirect.com/adc/international/international
@elhadizafour6385
@elhadizafour6385 2 жыл бұрын
tbh i'm really confused on how to connect Proximity Sensors in series 2:12
@automationdirect
@automationdirect 2 жыл бұрын
What part confuses you?
@elhadizafour6385
@elhadizafour6385 2 жыл бұрын
@@automationdirect not anymore i just thought the sensors was pnp but they are npn and thank you for the video
@VikashKumar-tk3de
@VikashKumar-tk3de 7 жыл бұрын
what are the factor which require in the selection of inductive proximity sensor? please tell
@automationdirect
@automationdirect 7 жыл бұрын
Hello! Thank you for watching. Check out this blog post, to help you choose the right proximity sensor: library.automationdirect.com/choosing-right-proximity-sensor/ Thanks!
@abasjabr7573
@abasjabr7573 6 жыл бұрын
What sensor type should I use to know the rpm ?thnks
@automationdirect
@automationdirect 6 жыл бұрын
@Abas jabr, thanks for the comment. That depends on a lot of factors. First you will need to know the material you are sensing, the speed at which it will be sensed and then the distance. The sensors used in this video will only provide a discrete output. You will need some type of Tachometer or other control system to calculate the RPM.
@abasjabr7573
@abasjabr7573 6 жыл бұрын
AutomationDirect.com I am planning to build rewinding fan machine .thanks for help.
@ndavidcarrillo1968
@ndavidcarrillo1968 7 жыл бұрын
hello Hello. I need know which sensor can i used in a line of production with bottle amber and clear?. i look the sensor PRK 18/24 DL46 of leuze electronic. thank you
@automationdirect
@automationdirect 7 жыл бұрын
Morning Nelson. We do not currently have any sensors that would be rated for both clear and amber bottles. The closest we have is rated for clear. Please see the following link. cdn.automationdirect.com/static/specs/e50peclear.pdf Thanks
@theotherebikeguy1473
@theotherebikeguy1473 4 жыл бұрын
Great vid. Question; if trying to sense periphery, what is the best inductive sensor; or capacitive?
@automationdirect
@automationdirect 4 жыл бұрын
Not sure I understand "periphery?" You want to sense something not directly in front of the sensor? If so, then you want an un-shielded or non-flush sensor. Capacitive vs inductive is more of a material decision - Inductive is for metal objects because it uses a magnetic field for detection. Capacitive uses an electric field so it can detect metal and non-metal objects.
@theotherebikeguy1473
@theotherebikeguy1473 4 жыл бұрын
Thanks. Yes that’s what I was referring to. Then shielded it is...
@jeremycook4670
@jeremycook4670 2 жыл бұрын
4:34 where can I find these cables?
@automationdirect
@automationdirect 2 жыл бұрын
Hi Jeremy, Go to www.automationdirect.com and search for "EVC". They are really cool because they come in a standard pig tail AND a Male & Female end so you can simply insert them between your sensor and regular cable to use as a diagnostic. And they are inexpensive ($12 - $18).
@automationdirect
@automationdirect 2 жыл бұрын
p.s. I added a note to the videos description for future reference! Thanks!
@alanliu6708
@alanliu6708 5 жыл бұрын
It is very nice !
@automationdirect
@automationdirect 5 жыл бұрын
Thanks for the feedback! We have over 1000 video just like it at www.automationdirect.com/videos and www.automationdirect.com/cookbook.
@sundaramurthia8845
@sundaramurthia8845 6 жыл бұрын
how to check in voltage...,?
@automationdirect
@automationdirect 6 жыл бұрын
@sundatamurthi a, I am unsure of what you are asking about.
@jitubabusay2826
@jitubabusay2826 4 жыл бұрын
Why u r using-ve voltage in vibration sensor why not+ve?
@automationdirect
@automationdirect 4 жыл бұрын
Not sure what you are referring to .. Can you elaborate and tell me where in the video you see this?
@jitubabusay2826
@jitubabusay2826 4 жыл бұрын
@@automationdirectI didn't see any video about discuss in - ve voltage I'm telling you about my practical , because I'm a instrumentation technician I did many more site , we are using - voltage in turbine shaft vibration only like , axial shift , ecentiri citi, key phaser, zero speed etc , those vibration sensor are we are setting -10.5 voltage it's calling also gap voltage setting I did many more site, plz my request I am a answer hunger... thanks.
@automationdirect
@automationdirect 4 жыл бұрын
Thanks for the followup. I can't answer your question, but our free tech support can. You can simply send them an e-mail with your question and they will be happy to help you with that. Go here to see all of our free support options: support.automationdirect.com/
@nikhilsuvarna6661
@nikhilsuvarna6661 6 жыл бұрын
Sir,were can i get this capacitive proximity sensors Can you provide the link for purchasing that sensor
@automationdirect
@automationdirect 6 жыл бұрын
NIKHIL, this is a link to our offerings of capacitive sensors. www.automationdirect.com/adc/Shopping/Catalog/Sensors_-z-_Encoders/Capacitive_Proximity_Sensors
@nikhilsuvarna6661
@nikhilsuvarna6661 6 жыл бұрын
AutomationDirect.com ,thank you sir
@industrial_inst.plc2692
@industrial_inst.plc2692 4 жыл бұрын
We have capacitative type sensor sapcon instruments pvt. Ltd. Enggnegipraveen@gmail.com
@riwarchannel321
@riwarchannel321 7 жыл бұрын
well actually I study remote sensing so I don't understand much in class so I reguest u to upload the videos on this topics
@automationdirect
@automationdirect 7 жыл бұрын
Thank you for the request, we will look into adding more videos in the topic area, in the future.
@bonnibon1346
@bonnibon1346 6 жыл бұрын
Hello, do you have a codes for capacitive proximity and inductive sensor using arduino? Can you please provide a link of it. We are having a project about using capacitive proximity and inductive 3pins. Can you please help us ? It would be a great help. Thanks. Godbless . More power.
@automationdirect
@automationdirect 6 жыл бұрын
@Christine Evangelio, thanks for the comment. We don't have any example code, for inductive or capacitive sensors with Arduino based control. We specialize more on PLC platforms. I would advise looking on Arduino Project hub (create.arduino.cc/projecthub) for example code. Hope this helps. Have a great day.
@bonnibon1346
@bonnibon1346 6 жыл бұрын
Thank you so much. Godbless and more power.
@venky2144
@venky2144 4 жыл бұрын
superb....
@automationdirect
@automationdirect 4 жыл бұрын
Thanks for the feedback. Did you know we have over 1100 automation tutorial videos at: www.automationdirect.com/videos (random search) www.automationdirect.com/cookbook (organized by topic)
@RogerSayers
@RogerSayers 5 жыл бұрын
Howdy... Where is the video for the magnetic sensors? Thanks
@automationdirect
@automationdirect 5 жыл бұрын
Ugh ...We really need to do that video ... other projects overtook it and it fell through the cracks. Thanks for the reminder - we'll get it back in the queue.
@ronlan1984
@ronlan1984 7 жыл бұрын
can a capacitive sensor detect glass
@Olaf-tx6ne
@Olaf-tx6ne 7 жыл бұрын
yup
@ndavidcarrillo1968
@ndavidcarrillo1968 7 жыл бұрын
Thank yuo for information.
@automationdirect
@automationdirect 4 жыл бұрын
No problem Nelson! Make sure to check out any of our 1100+ videos at www.automationdirect.com/videos/home
@sakirdag2976
@sakirdag2976 5 жыл бұрын
thank you
@automationdirect
@automationdirect 5 жыл бұрын
Did you know we have over 1000 videos like that one at www.automationdirect.com/videos? Check it out!
@hemantsikha6768
@hemantsikha6768 5 жыл бұрын
Thanks sir.
@automationdirect
@automationdirect 5 жыл бұрын
You're welcome. Did you know we now have over 1000 Automation Videos at www.automationdirect.com/videos? Check it out for more videos like this.
@MrParamarta
@MrParamarta 7 жыл бұрын
helpful..tanks
@automationdirect
@automationdirect 7 жыл бұрын
Thank you for watching - we're happy we could help!
@AztecWarrior69
@AztecWarrior69 2 жыл бұрын
Why don't ANY of these videos ever talk about the flat type?
@automationdirect
@automationdirect 2 жыл бұрын
Good question! We'll add a supplemental video to our To Do list!
@VikashKumar-tk3de
@VikashKumar-tk3de 7 жыл бұрын
nice video
@automationdirect
@automationdirect 7 жыл бұрын
Thank you for watching - we're happy we could help!
@raimundopereiradossantos4596
@raimundopereiradossantos4596 2 жыл бұрын
Ótima explicaçao. Obrigado.
@raimundopereiradossantos4596
@raimundopereiradossantos4596 2 жыл бұрын
Great explanation. Thanks
@automationdirect
@automationdirect 2 жыл бұрын
Glad to be of help! Make sure to check out more of our videos at www.automationdirect.com/videos/home
@gugob22
@gugob22 6 жыл бұрын
thank
@automationdirect
@automationdirect 4 жыл бұрын
Thanks! Did you know we have over 1000 videos just like it located here: www.automationdirect.com/videos
@noname-ig9zd
@noname-ig9zd 5 жыл бұрын
u talk so fast i cant understand
@automationdirect
@automationdirect 5 жыл бұрын
Hi Amam, We tend to expedite the videos to keep the time short. Sometimes that can make it hard to follow. We encourage the use of the pause button when playing a video, and you can also slow the video down by clicking on the settings gear in the lower right corner. Hope that helps!
The Inductive and Capacitive Sensor | Different types and applications
9:12
Mechatronic Neheyler in English
Рет қаралды 140 М.
ROLLING DOWN
00:20
Natan por Aí
Рет қаралды 8 МЛН
WHO CAN RUN FASTER?
00:23
Zhong
Рет қаралды 35 МЛН
Bony Just Wants To Take A Shower #animation
00:10
GREEN MAX
Рет қаралды 6 МЛН
Effective Ways To Detect People With Common Sensors
7:43
Core Electronics
Рет қаралды 68 М.
Inductive Proximity Sensor Overview from AutomationDirect
6:42
AutomationDirect.com
Рет қаралды 14 М.
NPN Sensor Explained | Working, Wiring, and Testing
9:04
Automatedo
Рет қаралды 16 М.
Limit Switch Explained | Working Principles
6:04
RealPars
Рет қаралды 184 М.
What is PNP Sensor? Working, Wiring and Testing
8:01
Automatedo
Рет қаралды 41 М.
Testing a capacitive proximity sensor
24:56
Curious Scientist
Рет қаралды 25 М.