Tech Tip Tuesday - Add-A-Leaf Installation

No video

Tech Tip Tuesday - Add-A-Leaf Installation

Рет қаралды 79,780

Күн бұрын

Thanks for tuning in to Tech Tip Tuesday at ToyTec Lifts! Today we are showing you how to install add-a-leafs.
Be sure to subscribe to our channel to stay up to date on our videos!
We are always looking for suggestions on what videos to make in the future, so be sure to comment anything you'd like us to do below!
Give us a follow on social media for our latest updates and posts.
Facebook: / toytec
Instagram: / toyteclifts
Twitter: / toyteclifts
TikTok: / toyteclifts

Пікірлер: 35

@Uppermost_1 Жыл бұрын

Great job. Best add-a-leaf installation video I've seen in KZfaq 👍

@jamesmarlowe-vc2mc Ай бұрын

Excellent and very informative video bud! Thank you!

@jonarbuckledeeznuts 4 жыл бұрын

you don't need to clamp the pack together; just use the jack under the diff and lift so the truck's weight pushes down on the leaf spring pack. you can do this for disassembly and install.

@lyinwife 5 жыл бұрын

great video...well articulated and concise...well positioned and good lighting....great job, thank you

@northidahoguy5549 6 жыл бұрын

How about a comparison between a single add-a-leaf and a multi leaf add-a-leaf pack. The pros and cons of each and what applications each one is good for.

@hurtman7 4 жыл бұрын

One of the best instructional vids I have seen!!

@powhana6019 4 жыл бұрын

Dont clamp overload leaf to maintain pak alignment. Clamp all the other leafs only. Then you don't have to mess with clamps as much

@johnjerome71 4 жыл бұрын

Best video out there.. Thanks!

@sloppydoggy9257 2 жыл бұрын

I guess before your start just take a white paint pen and mark the position of overload leaf, clamps etc.

@alixmallard1202 5 жыл бұрын

Great video. Can you tell us how much lift it provided? That would have been great info, as I trying to decide between add-a-leaf, and Hellwig overload springs.

@michaelthrasher2154 3 жыл бұрын

Thank you for the tutorial, it was very helpful

@Becker.Adam2 Жыл бұрын

Two 14mm bolts on the driver side frame remove a brake line bracket that puts way less strain on the lines.

@caspersspot4932 3 жыл бұрын

Wow thank you

@elms1319 2 жыл бұрын

Nice work 💯

@MrPinkDoors 3 жыл бұрын

thanks for the video!

@HealthSupercharger 4 жыл бұрын

If my leaf springs are sagging fair bit would you recommend more than just one add a leaf spring on each side.

@kylem3944 4 жыл бұрын

How do you know if you need degree shims???

@jameygilligan8137 4 жыл бұрын

Great video but zero follow up to the questions asked!!??

@sakutasu 2 жыл бұрын

How much lift did you get ?

@crosisofborg5524 4 жыл бұрын

Just want to point out that the leaf pack in this video was recalled and replaced with a new pack that has two more clamps along the length of the leaf pack. This tutorial does not address how to add the leaf with the new clamps.

@travisbeckett578 3 жыл бұрын

would have been nice if you showed how you actually aligned the center pin

@bluetetonsnow 3 жыл бұрын

what degree shim did you use?

@jaimeresto6798 5 жыл бұрын

I have a tacoma 2000, and its missing the smallest lower leaf. Should i put the add a leaf at the bottom or should i get the small straight leaf and put the add a leaf between the small and larger leaf. Will it make a diference?