*Works so well **Fastly.Cool** that it only requires daytime operation until high temp and humidity are overnight. It is difficult to get to side filters, but back is easily accessible.*

Awesome!! Our device came with the house we bought last summer. We were ignorant to cleaning it. This video help immensely! After a couple hours of work, it is clean and functioning well.

I do Have a Mitsubishi so this helped. I paid $280 for the company who installed it to clean it 2 years later because it wouldn’t blow much. . This time I watched your video 3 ,4 times and did it myself. I had some sticky points and I neglected to align the drip hose correctly the first time, but I went back and fixed it. Now it blows strong. Wow. Update: 3 months later, I had to do it again. Wasn’t as bad as the first time however. If that roller blade is dirty, the performance of the fan action is greatly reduced. Not looking forward to doing this 4 times a year. But, thank you for the great video

Great video. This combined with your vid on taking the cover off (the clips are stubborn) was perfect. Took me an hour. Hardest is getting the drain pan back and lined up, and also getting the clips back in when putting the cover on. mine was running like 5 years and I never thought to check the blower. I was always keeping the filters clean. Anyway my blower was so caked with dust, likely from a reno I did a few years back. I'm so mad I went through a couple hot summers with it not working well. Well worth it to clean!!+

Thank you this helped me today! Got the unit cooling and a happy customer just by thoroughly rinsing the blower! Loaded with dust!

Glad I found this video. Just looked up into my unit and noticed how much crap is caked onto my blower wheel.

Thanks for the Video. Was easy taking the wheel off, a bit more fuzzy to put everything back together. When I saw my wheel I couldn't believe that is cleaned with just a hose and nozzle.

Thanks a lot for this video. My Mr. Slim is an old one 2006 or 2007 and and it's prety the same procedure. The first time I clean my air condition, I never figured out how to remove the drum. So I use a tooth brush to clean it! Now we will be able to make a more efficant cleaning!

It just resolved the problem I met, and gave what I need. Thanks indeed!

This was extremely helpful. Only real issues is that drain pan really doesn’t want to come out and feels like you might break it , you should zoom in on the specific clips cause they aren’t super obvious . Also getting the wheel back in under the coil and inserting into the motor is a bit tricky . Thanks for this video , was able to clean a pretty nasty wheel and inside and now I feel confident I can tackle the other 4 units .

Very helpful information! Thank you so much, you saved us a ton of hassle!!

Thank you man for this video. Finally I follow your guides and does with the cleaning of wheel. Thank you so much. 👍👍👍👍👍👍👍👍👍👍👍👍👍👍

I like the simplicity of Mitsubishi's design when doing cleaning and maintenance on the mini split. I first vacuumed the blower and it made a huge difference but decided to take out the blower wheel and give it a thorough cleaning. This video made things easy to remove.

This video was great. It showed step by step instructions on how to get out my very dirt blower wheel. All back together now and working great. My unit was a little different cause it had the eye scan on the front and I only had two screws on the left side. Otherwise completely the same. Thanks!!

Thanks very useful. Set screw was a bit more to the right on my earlier model and required removing a plastic piece. Other than that, easy to follow and unit is now sparking clean. Years ago a former Mitsubishi authorized dealer dealing with dripping water from the unit came and charged over $500 to "clean" the unit. Just took the plastic covers off which I ended up cleaning myself on the patio to save the service person some time. He left the blower wheel in place, just wiped down the surface and told me that it was not removable.

You have completely changed my life. Im so happy 😭😫😫. Mine is covered in mold

Thanks. I just washed my blower and also cleaned my coiled with a foam chemical cleaner. My Aircon is as good as new! Saved money!

Most helpful . thank you!

Plain and simple...THANKS :)

Double thumbs up, thank you very much for the tip to remove the blower.

awesome ..simple ..direct..worlds best tutorial

Disassembling to clean went OK, but I found it difficult to reassemble. Piece on right side that drip pan attaches to was tough to slide back up and into the unit. Sounded like I was crushing coils. Would love video segment devoted to this part of reassemble

Thanks. Helped me a ton.

I just cleaned mine with out removing the out cover just the vertical louvers and folding the horizontal louvers out of the way using a vac and modified tooth brush.... real pain... I'll try this method on the next one but do have to comment that removing the outer cover on mine is a pain in the pitutie ... and you have to pry it loose with a screw driver or such after removing the screw... I will say we have 5 Mitsubishi Mini-splits and love them.... the one I cleaned was starting to 'howl' because of all the dust and mold built up on the Blower Wheel. Been running for just over 3 years.

Thank you very much, just cleaned both of mine, super good video! Thanks again !

Hi Jeff, I have been looking for a video on how to remove the Blower Wheel on my Mitsubishi Inverter (Heavy Industries). You showed it just like... remove the screw, GRAB AND PULL THE DRUM AND THAT'S IT!... well, have been figuring-out for half an hour.. it it loose, removed the screws but would not release. With other brand I would easily remove it but not with Mitsubishi. There must be something that holds it like clip or sort of because it is loose but wont release.

Thanks, anyway what happen if the blower wheel get damage ?? I mean what if i has cracks problem missing of parts of wheel blower

on the reinstallation of my mszge15na the drain pan will not snap on the lower left side - - thanks for your thoughts !

I use mitshubitsi Model SRK13YN-S4 inverter, can i use the same method as in the video if i want to open air-cond blower?

Thank you so much for this video!!! Was so helpful!

Mitsy GE09, we have 100 of these units in our hotel and this morning I have had the first one in 10 years that it is impossible to remove the blower wheel (Evap) the grub screw cam out easily but alas the wheel has rusted onto the shaft and I cannot move it despite a good wd40 soaking. The blower motor is defunct and needs replacement but cannot move forward. Beginning to think I may have to replace indoor unit completely but I have just been advised that they are no longer available. Any ideas?? Please!!!

Excellent! Succinct and clear. Nicely done...again. Video request : Assessing system refrigerant level status without breaking system with gauge set. No error codes. Good airflow. Clean. Or, is recover and weigh-in only reliable option when slow refer leak suspected?

I can’t find the set screw through an opening on the fan blower as described in the video that holds the blower in place. Therefore, I can’t pull the blower out to clean on my MSO a24na mr slim split ductless. Where is the set screw? Help?

I have the larger units on bottom of wall. The barrel fan gets buildup with black something any way to prevent that and why is it happening. Also how do I clean drains, and what do I use to not hurt unit? I do keep vents and filters clean probably 3-4 times a week. Please help...Need these units to last.

Hi Jeff I tried removing the blower but it's not coming out. I have removed the setting screw and yet it is not coming out. Looks like the right side bush is stuck to the shaft of fan motor. Is there any trick in removing the blower from the fan motor shaft? Thanks

How to get access to the aircon's drain pipe?

Just wondering if its possible to vlean this thing? After a recent mold clean, everything was cleaned, besides the blower wheel, it’s impossible to clean its mold, the mold would be on each of the individual blowers and spraying or a hose wont fix it. Is the only option to replace the wheel?

Sir i have just mitsubishi inverter. When i set it on 16 Celsius ,afer 1.5 hour its led lamps become dim and it changes swing position and its swing does not respond to remote controller afterwards. Is it faulty? i have to restart it again to make swing adjust once again.

I would like to know why condensate water is dripping on the blower wheel (please help me out)

Please show how to remove the blower wheel from the flush mount ceiling one way units. I have 3 that is blowing out chunks of black mold. Yes the filters are cleaned every 2 weeks.

What kind of grease is used on the bearing?

Accidentally broke some fins on blower wheel for MSY-GE09NA-8 and part is out of stock,,.any suggestions?

I just can't loosen the set screw holding the fan to the motor shaft. Twisting really hard and don't want to force it any more. Any tips? THanks.

Hi , im unable to remove the fan blower. There are no screws in the blower as shoen on your video. My Mitsubishi Aircon Starmex Model is MS-B10VB. Hope u can helpout. Thanks

How to clean koppel suspended aircon indoor unit?

Thanks, I really needed this, my air-con was absolutely filthy, dust all through the blower wheel congealed and white mold throughout, as well as black mold behind the wheel and in the condenser tray, I'm surprised I didn't get a respiratory infection

Any videos for the mr.cool unit? It's totally different from this unit

So I had my drain pan clean and drain pipe clean out as it was leaking now when I switch it on main power on the air con just blows constantly the remote won’t turn it off nor does the buttons on the ac is this happening due to being a hard reset an needles to re sync it self or thermostat issue

Im pretty sure my blower wheel is rusted on, besides penetrating oils any suggestions?

Thanks for the video =)

Can someone PLEASE send a manual or video on how to disassemble the msz-ap80vgd??? Ours is installed with the left-hand side directly against the left-hand wall. When you try to pull the tray out, it "appears" to be connected to the drain pipe somehow. I could be wrong, but there's no way to tell and don't want to destroy it. HELP?

I damaged the end of the blower when i put it back. The wheel was not seated correctly . now i need a new wheel and the end bearing . how can i order it.

Really helpful guide. I wish my Daikin is as easy to remove the wheel...

Disassembling to clean went OK, but I found it difficult to reassemble. Piece on right side that drip pan attaches to was tough to slide back up and into the unit. Sounded like I was crushing coils. Would love video segment devoted to this part of reassemble!

Will a dirty fan blade cause ice to be on the fan.

I live in Puerto Rico and they only charged me $75 to clean a 30K BTU unit, so I had them do it. All they did was drop the drain, then the guy literally ripped the metal grid (that protects if the wheel disintegrates) out of the unit and threw it away. Now he had access to the blower wheel from below, which he never removed. With a protective cleaning cover on the whole unit, he just sprayed it with evaporator cleaner, as he turned it. Then he rinsed it really well with water from a pressurized sprayer. It was full of mold when he started and I checked it when he finished and its completely clean. He snapped the drain back in place and it was good to go. The blower wheel never came off.

Drip pan looks really easy to remove in your video, but was quite rigid in ours, especially the right side. Please show how to do the reassembly, especially the drip pan, aligning the blower, and getting the cover back on. The blower was rubbing on something when we turned it back on, and we had to disassemble all over again. Some checks along the reassembly would have prevented this.

Thanks, I cant get aircon service because of the lockdown... this allowed me to clean my aircon thoroughly on my own.

Are the new hyper heat indoor heads as simple to disassemble as the one in the video?

The screw that secure blower to motor, is there any specific position to install?

What causes the fan to blow ice

Is this for all ME models?

After reassembly the blower wheel is now making a slight clicking / scraping noise that wasn't there before. 😳. Could the blower wheel be pushed too far into the shaft? Should I loosen the set screw and nudge it back to the left a little bit or would it be from a bent aluminum fin or something like that? I really was hoping not to have to take everything apart again. Any advice? Should there be some sort of lubrication applied to the moving parts of the blower?

When putting back the set screw for the blower, does it have to be very tight?

What if I undid the screw inside the blower it it still doesnt come out?

Sir plz tell me universal pcbord work indoor unit, tell me waiting for u (mitsubishi AC)???

Blower was stuck n couldn't get it out. Ended cleaning it hang halfway out. Took longer but job done. When puttin back the blower screw, must push blower to right most before tightening screw. Didn't do that the first time. Think Blower hit against something on the left...ratatata sound. Gotta dissemble, put blower to rightmost n tighten. Then sound was gone. Cleaning the other blower tomor. Should be way faster. Thank you so much.

Sir mere ac ka blower toot gya ha jisse vo vibrate karta ha to iisse koi nuksaan to nahi ha plz tell me

I have followed all the steps but when I pull out the blower cylinder it only moves a little bit I noticed a little edit in your video right where I'm having trouble did something happen there that you didn't want us to see 😁

My blower wheel won’t come out! I have plenty of room to pull on it. I pulled pretty dang hard and nothing, I feel like there’s some step I’m missing. I removed the set screw and still nothing. The wheel will move left about 3/4 of an inch but after that it’s stuck

The wall units are pretty self explanatory, where is the video on the mlzkp one way ceiling cassettes?!

I need the same blower wheel removal procedure for SRK52HE :(

Any idea of the screw size on the blower wheel? Thanks.

Is this a training video for apprentices, or customer's voiding there warranty.

Should close up what to remove the clips on the drainer

Does a little dirt on the blower fan really affect its performance? Thanks.

Does this one have a drain pan

The shaft is rusty and is totally stuck. Tryed to push it over. It's so stuck till the fan motor is moving.

Purchased: August 2023 - still works GREAT!I kzfaq.infoUgkxxsUnXhGsSJLim_XnMHyQK0u3XVaW-CGn live in a studio and during the summer it gets scorching hot - really old building with no ac units. I can’t express how EASY it was to install. This unit has been a life savior during the summer and some days during other seasons where it can still be a bit warm at night. In this small place is my friend, a husky, poodle mix and myself. We need AC - lolI don’t use the dehumidifier option - I’m not sure if it will leak in my house, since I did not install the small draining hose that came with it. May look into it late but I don’t worry about much humidity in the apartment. I don’t understand why the negative reviews since all things mentioned, I personally did not find issues with. Definitely worth it!

The fan on my indoor unit makes a rattling/ticking sound.

Drain pan was a pain to get back on as another poster commented. Also, reinstalling the blower was not ease. Getting the rubber bearing in to fit in. Then the blower wouldn't spin, and that's where I am! Don't want to burn out the motor, but it is not spinning freely. With how nasty these units get inside, this should be designed as a much easier procedure

No set screw on mine and it isn't coming out.

Thanks

Can the blower of a split type ac be remove to clean it?

Its really hard to remove blower it gets stuck and wont budge

How to remove down the evaporation coil so as to clean the coil more efficiently by washing from both sides, inside to out n vice versa ?

My Mr. Slim's blower wheel doesn't have a set screw and doesn't want to come out. Maybe mine is an older model; It is around 15 years old. Thanks for the video, but without the set screw, this isn't going to be nearly as easy. I guess I'll either continue taking it apart or put it back together without cleaning it.

Great video and.... IDK what to do with my hands lol

Amazing

It's a shame all models aren't designed the same. The blower wheel on my Mitsubishi has a rubber compound in addition to the set screw. Besides taking the entire inverter off the wall and dismantling, I can't see any other way of removing the blower wheel; not to mention, not knowing what the black rubber compound is, how to remove it, and re apply. Accessibility for maintenance (to clean mould that is guaranteed) needs to be engineered into the design of all models, or it forces people to pay an avoidable service fee, or even worse having to buy a new system.

Why is the cover so thin. Like paper.

I could not remove the blower wheel. It seems to be stuck. The set screw has been removed and the screws on the left side have been removed but the wheel will not pull out.

I cant seem to yank my blower out Even after removing the screw :’)

now how to remove the coil

Guys i broke the plastic olades of the blower😭 how much for a new blades of it? My dad will kill me😭

Nice

i legit cannot get the blower wheel to fall out. i even unscrewed the axel screw so far it fell out and on the floor and the wheel still is held in there with glue or something..

I did everything and put it back.the fan is NOT turning.Unit is on .

This guy loves his Meth pipe

you have great presentation but they are not in depth .