TOUGHBUILT StackTech Tool Storage System REVIEW

Рет қаралды 60,938

5 ай бұрын

TOUGHBUILT STACKTECH Tool Storage System REVIEW
ToughBuilt Videos we did
Which Lock & unLock comparison vs DeWalt / Milwaukee kzfaq.info/get/bejne/mLiAi9qgnNG0gmw.html
StackTech Organizer comparison kzfaq.info/get/bejne/o5yRfb12s53ed6c.html
2 in 1 convertible Hand Truck video kzfaq.info/get/bejne/h5eSlpiLtbKnnJ8.html
Close Look at the 1 Drawer and comparison kzfaq.info/get/bejne/n96Ad7STu8-2YqM.html
Video we did on TOUGHBUILT SAWHORSES
kzfaq.info/get/bejne/nMqPbJtkvNLQh2g.html
Time Stamps
00:00 Beginning
00:51 Not sponsored and What we are Covering in the video
01:54 Some background on my Tool Box Journey
03:37 TOUGHBUILT Advantages
06:30 Transporter Series ( series stuff )
08:50 Accessories and IDEAS for Garage or Work Place setup
09:37 Close Look and Hands on with TOUGHBUILT system
Check out my New Channel about my Tesla Journey
www.youtube.com/@mytezlajourney1
@techmadeezy
#techmadeezy
@techmadeeasy1
@ToughBuilt
@TechMadeEzy
#toughbuiltstacktech
PRODUCT LINKS Below
Using our links supports our channel at no additional cost to you, thanks in advance.
Using our links supports our channel at no additional cost to you ( thank you )
NEED A LINK? post a comment and we will get back to you.
Affiliate Note:
Using our Amazon or EcoFlow Links supports our channel, we are an affiliate and this is one way we can buy products to review. We make a small commission at no cost to you as an affiliate. Thank you very much.
Try Amazon Prime free for 30 days
amzn.to/3rp84vu
Give the gift of Amazon to someone
amzn.to/36IU7jP
Students try Amazon Prime for 6 months
amzn.to/3pRgxXT
Say Hi !
Instagram: Techmadeezy
techmadeezy
Twitter: @TechMadeEasy1
techmadeeasy1
Facebook: TechMadeEasy1
techmadeeasy1
Email
techmadeezy@gmail.com
Check out my New Channel about my Tesla Journey
www.youtube.com/@mytezlajourney1
Intro Outro and other Music Credit:
Song: Two Face
Artist: Causmic
Other Music:
Song Meet & Fun!
Artist: Ofshane
Song: She No Dull Beat
Artist: Nana Kwabena
Song Meet & Fun!
Artist: Ofshane
Song Timpani Beat
Artist: Nana Kwabena
Disclaimer:
Due to factors beyond the control of Tech Made Easy I cannot guarantee against improper use or unauthorized modifications of this information. Tech Made Easy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Tech Made Easy recommends safe practices when working on machines and or with tools seen or implied in this video. Due to the factors beyond the control of Tech Made Easy, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Tech Made Easy.
TOUGHBUILT
TOUGHBUILT STACKTECH
stacktech rolling tool box
stacktech3 drawer
stacktech compact tool box
stacktech large tool box
stacktech xl tool box
stack tech tool box
stacktech organizer
stacktech xl cooler
stacktech compact cooler
stacktech tool crate
stacktech drawer
stacktech wheel cart
stacktech convertible hand truck
stacktech advanced transporter
stacktech work surface
stacktech 4 drawer
stacktech 2 drawer
stacktech compact vacuum
stacktech hand truck
stacktech tower light
stacktech box fan
stacktech compact water cooler
stacktech area light
stacktech magnifying light
stacktech tumbler
stacktech cord wrap
stacktech 4 wheel cart
stacktech dolly
Clip tech
Cliptech
toughbuilt B70R
toughbuilt D70-3
toughbuilt A10
toughbuilt A30
toughbuilt 60C
toughbuilt B30
toughbuilt B50
toughbuilt C60-C
toughbuilt 030
toughbuilt C70
toughbuilt X50
toughbuilt T60
toughbuilt B70
toughbuilt T10
@TechMadeEzy
@ToughBuilt
#TOUGHBUILTSTACKTECH
#toughbuilt
tme225
#techmadeezy
#tme225
@techmadeezy

Пікірлер: 162

@stereothrilla8374 3 ай бұрын

I work in film/tv and have built extremely expensive custom sound carts as well as support/follow carts which are built like tanks, very heavy and do their jobs extremely well. However, my team and I are always looking for lighter weight more modular solutions. These are by far the best commercially produced lightweight modular system I’ve seen and we will definitely be adding some of these to our sound trailer. Really excited to get my hands on some of these and start designing some additional support carts. Then we’ll start having custom laser cut foam inserts made to accommodate various pieces of gear. So stoked!

@mikecookson333 5 ай бұрын

The cooler is white because it will stay cooler longer then black.

@TechMadeEzy 5 ай бұрын

Makes sense you are right thanks for that Mike 👍🏼

@Robindahoodz 5 ай бұрын

They said they were going to introduce adaptor plates to fix the stacking problem between half boxes at the bottom and full boxes on top. Another reason i like this system is the color. Milwaukee packouts turn pink after sitting in the sun for a long time, Black continues to look fine.

@TechMadeEzy 5 ай бұрын

Thanks, another user posted about the adapter, I didn't know so that's great news! Thanks for sharing

@shaymic20 29 күн бұрын

the grab and go capability from garage to truck is actually insane one box one set of tools that has an indended spot no matter what. storage usage transport all one system. goddamn

@alessandromartintv8381 4 ай бұрын

This video helped me understand Stack Tech system. Thank you for your detailed explanation.

@TechMadeEzy 4 ай бұрын

Thanks Alessandro 👍🏼

@vinnyivanov2906 5 ай бұрын

Biggest reason I chose to go with toughbuilt stack tech is because it's black and modern, plus it was cheaper than milwaukee. So far I have been extremely happy with toughbuilt. Can't wait for the full lineup to be released

@TechMadeEzy 5 ай бұрын

I agree

@sizzleneck 5 ай бұрын

I have 2 TOUGHBUILT work tables and a 24" level and they are great! I been going to Lowe's and Home Depot for the last few months and watching a lot of KZfaq videos on the storage units. I gotta say I going Milwaukee PACKOUT all the way, they are so innovative and vast and always evolving! Thanks for the video and good luck on your choice 👍🏼

@TechMadeEzy 5 ай бұрын

Thanks

@bonezj117 5 ай бұрын

the 2 shelf system is out and runs 130 dollars, would love to see a review on that. I myself is switching over from Rigid system to the toughbuilt due to its storage and transport system. Great video!!

@rubenstones8684 5 ай бұрын

Flex needs to steal the transportation designs, since they take all the good ideas 😂

@HeadCannonPrime 5 ай бұрын

I have the toughbuilt tool belt with all those clip on pouches. Its pretty great.

@randysmith9636 5 ай бұрын

For the tumbler, make sure the lid is on tight and non leaking. The moment you tilt it back to move the unit around you will find out if you do or not.

@scottyee707 4 ай бұрын

they should do all white

@TechMadeEzy 4 ай бұрын

For now being a new brand that actually has some nice features they have to start selling like crazy and this spring and summer they’ve got more items coming out I think once they become more profitable, they can probably come up with maybe other colors

@user-lt4lf6re8o 5 ай бұрын

Thanks for sharing. I REALLY like this platform!

@TechMadeEzy 5 ай бұрын

Thank you

@sixpotshot 3 ай бұрын

Currently my storage / organisers favourites are Dewalt and Festool - I have run Toughbuilt stuff for other things like tool belts / mitre saw stand. I'll be adding Toughbuilt storage to my line up: the stuff they have done is nothing but truly impressive! Shame they are all so expensive and in this matter I reckon Dewalt will still have an advantage.

@Bamamarama 5 ай бұрын

This is going to be a really great product.

@KillTheRevolution 5 ай бұрын

Thanks for the thorough walk through!

@TechMadeEzy 5 ай бұрын

Glad you liked it 👍🏼

@kieranhuang-odonnell304 5 ай бұрын

Loved this video! great to see reviews coming out for the 3 drawer tool box, based on other videos TOUGHBUILT is good at seeing what the community has to say and makes changes! they already have an adaptor coming out later for the two smaller boxes to hold a full size box on top. I hope they also see this video and can come out with solutions for the locking system on the drawers!

@TechMadeEzy 5 ай бұрын

Wow thanks! Didn't know about the adapter

@ronaldshank736 2 ай бұрын

Great review! I like this system, but I also like the flex they have a some great stuff too.Jake weihe designs has a drawer lock for these drawers.

@wackyweyland8857 5 ай бұрын

The advanced transporter is easily the coolest addition

@TechMadeEzy 5 ай бұрын

Love it!

@TBJK07Jeep 5 ай бұрын

That’s what drew me into it.

@TiczAdam 5 ай бұрын

21:30 This is probably by design. The internal dimension of the full with boxes would be smaller if that would capabable to go top of two 2 half with box. Maybe if the half with boxes could go asimetrical, but in that case you have to have both left and right of the half with boxes.

@dtardis 5 ай бұрын

Great review. Thank you.

@TechMadeEzy 5 ай бұрын

Thanks Matt

@ajgreen868 5 ай бұрын

Love the 4 wheel cart and the accessories you can add on the sides. But I wish their tool box opened from the front though like milwaukees does. Saves you from unstacking everything cause that can be a real pain just to get access to one tool. Other than that I do like this system better so far. And prices weren’t as bad as I though. Another awesome review bro!

@Muscleupsanddangles 3 ай бұрын

These boxes make me wish I wasn't already fully invested in the tough system by DeWalt, which I love. These just look better all the way around.

@TechMadeEzy 3 ай бұрын

The locking system definitely has me sold but the quality of the boxes the strength and more importantly, their catalog of what’s coming out this spring and summer. Check out our video tomorrow morning at 8 o’clock. We have something launching you’ll probably want to check out.

@kyleskopelitis8485 2 ай бұрын

I have a set of sawhorses and the belt / braces and a number of pouches. The pouches are rigid and tools cannot be forced in to the pouches as you would possibly with a typical tool belt . However, I believe that due to the various pouch configurations, they will generally suffice for most applications. They are very sturdy and drill holsters work well. I've invested in Systainers and these work well and are surprisingly tough (if not abused too badly. The STACKTECH looks like a brilliant solution - particularly like the drawers - Systainer as far as I'm aware do not have drawers as spacious as the Toughbuilt ones. Market needs to keep an eye on this range. Drawbacks for me are cost and possibly weight. Great products though.

@ForestCinema 5 ай бұрын

I feel like these have BY FAR the cleanest exterior geometry. Also, everything is “one touch/one hand” operation, and the black is massive. I work in an industry where a bright colored system just wouldn’t cut it. Can’t roll up to a film set with anything that might show up in a reflection. These are gonna get whacked on the corners, and that steel corner plate will keep em really protected. The “tray” top is great for small parts and tools. They’re also doing a rolling drawer, and I’m gonna go ALL drawers, so the “no opening mid stack” is a non-problem for me. These look like they’re for a well adjusted adult as opposed to a nicotine-dependent construction bum who’s looking for his next Michelob Ultra.

@SD-jf7nb 4 ай бұрын

Have you seen the cupholder?

@TechMadeEzy 4 ай бұрын

@SD-jf7nb I showed it in the video

@SD-jf7nb 4 ай бұрын

Has to be a tallboy!

@SD-jf7nb 4 ай бұрын

Malpais stout. Availability has been my biggest issue so far, tools ok, I broke the jabsaw jabbing with it, bought it for the compact blade sheath anyway. Some things have changed, not all for the better, Lowes only carries it spottily, but the system looks solid.

@TechMadeEzy 4 ай бұрын

@SD-jf7nb not sure if you're subscriber but we are going to definitely have more reviews coming up we might even have a surprise this weekend

@TheKingOfInappropriateComments 4 ай бұрын

I have the Mwaki packouts and a lot of the drawer units. My complaint about them is that if you look at them at eye level, there's a pretty sizeable 5-7mm gap above each drawer. And because there's no sort of back stop behind it, dust, dirt, water, insects, whatever can get in through there. So if you're keeping things in there expecting them to stay clean and dry, you better take a closer look at how vulnerable it really is. I couldn't tell in your video if these drawers have a big gap too. That ambulance stretcher work bench thing is very cool though. I almost want to get one and mount some packout wall plates on the top of it haha

@jackb6989 4 ай бұрын

I may have to do this for the new truck. That shit is slick

@Frank2023_-_- 5 ай бұрын

Nice! As I mentioned, it's all about innovation. Al, I think you're going to need a larger warehouse 😊 Great review..

@TechMadeEzy 5 ай бұрын

That's a great locking system! have any connections Frank for some warehouse space? 😎

@mariusmihai1292 4 ай бұрын

Man I have both Milwaukee and dewalt. Milwaukee has more options more details… but dewalt it is just what you need. Dewalt has a huge huge huge advantage because you can pull the the box from under without moving the ones that are siting upside. That is gold. It cost you less time and less effort to get to the tool that you need. Everytime. And that means money and comfort. The dewalt boxes are much more easy to clean. You just point the washer and it’s done. Because they have a simpler form… not 100 iregularities on the surface like Milwaukee has. I like how this looks but if they don’t have a system that you can access the boxes without moving the ones that are siting on top… is not comparable.

@TechMadeEzy 4 ай бұрын

Some good points thanks for sharing your experience and opinion

@Pillados- 5 ай бұрын

Me gustó su vídeo, ya he visto muchos videos sobre este sistema, en tuyo primero que veo el cajón cooler 😊

@TechMadeEzy 5 ай бұрын

Gracias

@Joeshmofoshoyo 5 ай бұрын

Nice review. I have the Ridgid boxes. They are nice but the hooks to connect each box to are wearing out. After a year of constant use, some of the latches wont stay tight. I'm really digging ToughBuilt, im probably going to switch to it.

@TechMadeEzy 5 ай бұрын

Thank you

@user-nv1qp4jr7p 5 ай бұрын

Hello, could you review the locking system from the bottom? Will the boxes have issues locking if some cement or putty dirt gets in and dries on the lid.

@TechMadeEzy 5 ай бұрын

I think that'll be a problem with many locking systems especially cement

@slapjack2000 5 ай бұрын

👍👍

@smartassmart 5 ай бұрын

the deal breaker for me when comparing this to other systems like milwaukee and dewalt is it doesn’t offer a speaker system with battery charging station to go on top… it’s a must for me.

@TechMadeEzy 5 ай бұрын

I understand that another way to think about it too, though is 3-D printing I see many folks out there making accessories to adapt

@2chipped 4 ай бұрын

Very professional video ! Unfortunately ST like most brands, do not spend enough time in real life working conditions and still make mistakes. Like packout before them,and Tanos the original modular system. 1/2 width- full connection ,no lock drawers etc. Black...I checked my packout with an temperature gun in December . 110° on red handles,150° on black lid in full sun. What i do like are gusseted corners ,bars in lids,full modular configuration unlike my packout. I have worked 20 years to become completely cordless,and to have my tools be stored inside. So the well thought out side mounted accessories are worthless to me, like the packout p-towel holders etc. The soon to be released ST drawers,etc look very cool. However a bird in hand is worth 2 in the bush. I have too much $ into packout for the switch to be worth it, #gamechanger has not been released for my workflo just yet.

@TechMadeEzy 4 ай бұрын

I am in pack out now, but I wish tough built would’ve had their full lineup because they really have some nice products coming by the summer

@2chipped 4 ай бұрын

@TechMadeEzy If they release everything promised,economy holds up,and their shaking financials hold,and Lowes can pull their head out of a tight area. I may be interested ,to many ifs at this time.

@RhinoAg 3 ай бұрын

this is the future

@kevinlucas8437 5 ай бұрын

The only reason things won't fit on top of cooler and half size is that they need to open from the top, so they'll need to always be on top . But beefy accessory locking !!!!

@joeshobbies8755 5 ай бұрын

Wow these look GREAT! not being able to stack on halves is a deal breaker for me, however. The klein team must be really upset about this... milwaukee at least had time in market - you can tell they really studied what everyone complained about or made mods for in regards to packout. Thanks for this video!

@TechMadeEzy 5 ай бұрын

Thanks for the comment I heard an adapter is coming out so that should fix the issue I guess we'll see

@kevinlove3025 4 ай бұрын

I’m waiting for the dang day somebody makes a TABLE that’s not 30-33”. But a solid preferably modular table with features and functions. Like I love the tough built table BUT ITS TOO SMALL. I want one table. That’s easy to use outside on somewhat unlevel surfaces. 5’ x30” range would be perfect. that trailer hitch receiver and the transport systems are awesome. Hope Milwaukee follows suit. Or very least I’m sure somebody will 3D print adapter plates for Milwaukee 🤣. But gosh dang it I want a SOLID table that’s big enough.

@chrisarndt4558 4 ай бұрын

Hey! Great video!!! Very informative! I’ve been very slow to get into packout and haven’t gotten far yet but now I’m going to really have to make a big decision! Also a bit of constructive criticism, you should try to avoid stating obvious things continuously when you go and edit the video with reading images or try to be sure to mention it only once. Also with stating each box is ip65, that’s clearly well known for each box. Fill us with more of your great information and stop repeating yourself. 😊 thanks again tech made easy.

@TechMadeEzy 4 ай бұрын

thank you

@douglasangelflores6796 Ай бұрын

Well done video.

@TechMadeEzy Ай бұрын

Thanks Douglas

@raysonrodriguez7215 5 ай бұрын

Check the prices for some strange reason at Lowe's The price went up... Pacifically, the cooler that was $99 is $119 now and the organizer was 49.69 to 69.98

@TechMadeEzy 5 ай бұрын

? That’s insane

@raysonrodriguez7215 5 ай бұрын

@@TechMadeEzy yup crazy

@johnhall2401 3 ай бұрын

Great system! Are the front of the drawers waterproof as well?

@TechMadeEzy 3 ай бұрын

Hi no buddy

@keylitho 5 ай бұрын

Are those corner metal piecs screwed in or are those rivits.?

@TechMadeEzy 5 ай бұрын

Screws 👍🏻

@keylitho 5 ай бұрын

@@TechMadeEzy Thanks... I actually just picked up a few boxes..

@TechMadeEzy 5 ай бұрын

Sweet! Enjoy and they have a lot more coming and hopefully I will do some reviews on the new boxes and accessories so stay tuned

@michaeldaidone1904 3 ай бұрын

Ridgid already has 2 drawer, 3 drawe and 4 drawer boxes with removable rolling cart. Any one of them can go on the bottom.

@davidlandreth8896 5 ай бұрын

So, are the 3 drawer boxes out now? I have not seen them in the stores yet. I've been waiting on the 3 drawer boxes and the shelf system to come out.

@TechMadeEzy 5 ай бұрын

Yes, just change stores to see inventory. Single drawer also just posted a close look kzfaq.info/get/bejne/n96Ad7STu8-2YqM.htmlsi=4sBRIGiQZeJCcPQ5

@DYT-jx4jp 5 ай бұрын

I think you may get the reward for the fastest change: I just watched your MKE/Dewalt video like 2 days ago and now this one with Toughbuilt 😁 As always, thanks for the review (and not being sponsored some of the time and letting us know)!

@TechMadeEzy 5 ай бұрын

Not convinced yet, thanks

@DYT-jx4jp 5 ай бұрын

Yea, I know. Sorry my comment didn't convey that! I was thinking if you ended up going with Toughbuilt it would be the "fastest" 😁

@TechMadeEzy 5 ай бұрын

👍🏻

@outlet6989 24 күн бұрын

As the Sultan said to his Haram, "I'll take two. No, make that three."

@TechMadeEzy 24 күн бұрын

Love it 😎

@TBJK07Jeep 5 ай бұрын

Lowe’s had a sale not that long ago. A set up was 169 or so. Also the Klein Modbox is pretty nice except for the color. They have tons of accessories.

@nachodaddy1 Ай бұрын

The pricing on these is about $20- @25 higher at Lowes right now. Any way good review, I've got my eye on a couple of these boxes.

@TechMadeEzy Ай бұрын

@nachodaddy1 yep they raised the prices not too long ago kind of stinks but they're going to be launching some really nice boxes in the next couple of months or at least they say by the end of the year

@james2042 3 ай бұрын

Not a fan of their "release it and sell an accessory to fix it" model, they are making an accessory plate to mount narrow boxes and making a locking accessory for the drawers (I don't understand how unless it will be a big bulky thing that props itself under the handle, theres no lockable anchor point on these units). They're claiming they're going to redesign the narrow boxes to not have this issue anymore, maybe lowering the sides on top so they match the profile of the hump. Also my guess is coolers are white so they don't bake in the sun, like milwaukee's has a white top instead of black. The compact cooler seems like a nice touch that they plan on releasing. I could see stacktech working its way into camping with some of these accessories

@shiny5837 4 ай бұрын

from Japan. I really want these items. please export . I wish

@CaptainsOrders 4 ай бұрын

some nice looking stuff, i just got the horses and like them so far. where are the boxes made, china?

@TechMadeEzy 4 ай бұрын

Yup china

@ortega2424 5 ай бұрын

You must be made of cash! Thanks for the review!!

@TechMadeEzy 5 ай бұрын

I wish! But many times I have to buy items to review them. My friends don’t mind since they end up with nice Xmas gifts 🎁

@ortega2424 5 ай бұрын

Well with that being said - can we be friends? 😂 Kidding. Keep up the great work!

@TechMadeEzy 5 ай бұрын

@ortega2424 thanks 👍🏼

@DYT-jx4jp 5 ай бұрын

Your con on the full not stacking on top of two haves -- do the Dewalt and/or MKE stack a full on top of two haves? I'm not into the details of these "boxes" so I kind of assumed none of them stacked a full on top of two halves. Perhaps with a "spacer"/special piece... It got me thinking how it could be designed to be able to do it. I'm learning a bunch on these type of "box systems" via your reviews. Thank you!

@TechMadeEzy 5 ай бұрын

Milwaukee does, haven't checked out Dewalts half systems.

@DYT-jx4jp 5 ай бұрын

Thanks for the reply/answer. I get it why this is a con since you've got the MKE ones.

@KuzConstrution 5 ай бұрын

Dewalt does but no as cleanly as packout or Klein

@andyhobbs265 5 ай бұрын

They didn't miss anything in r&d the two smaller boxes aren't meant to have anything on top. They create a middle rib which is why you can't stack on top of them.

@TechMadeEzy 5 ай бұрын

Hi they are making an adapter so you can stack them anyway you like

@jharv62301 5 ай бұрын

4:51 What’s a DYIer 😂. Good video Al, Flex stack pack next to review?

@TechMadeEzy 5 ай бұрын

Lol thanks for cracking on me!

@trowawayacc 5 ай бұрын

What kills this for me is that its a lowes exclusive. Cant get it outside usa. Not selling on amazon or even ebay.

@TechMadeEzy 5 ай бұрын

I see that Amazon does carry the brand, but they don’t carry the stacktech line. Maybe that’ll change one day.

@JK-ne4xy Ай бұрын

NONE of the Lowe’s in several different states I’ve been to ever have large stock on any Tough-built system….

@Born2BSalty 4 ай бұрын

we all want a 1 big drawer box.. FOR AGES!

@TechMadeEzy 4 ай бұрын

It's coming but might be end of summer

@bonezj117 5 ай бұрын

there is a attachment that toughbuilt is making to allow you to stack on top of half boxes

@TechMadeEzy 5 ай бұрын

Hi yeah I recently heard, thanks 👍🏼

@johnrichardson6142 3 ай бұрын

Is there a wall mounting system for garages?

@TechMadeEzy 3 ай бұрын

Yes STACKTECH Plastic/Metal Shelf (2) Stacktech Shelves, (2) E-track Sections www.lowes.com/pd/TOUGHBUILT-STACKTECH-Plastic-Metal-Shelf-2-Stacktech-Shelves-2-E-track-Sections/5014506457

@camdendexter 3 ай бұрын

How do you record but have both hands available??

@TechMadeEzy 3 ай бұрын

Magic 😎

@camdendexter 3 ай бұрын

@@TechMadeEzy 😭😭

@johnnymeans356 5 ай бұрын

It's clear that the R&D teams are listening to the complaints voiced in reviews l like this. There's no way some design dweeb predicted that water runoff would be an issue.

@Charles-lane277 5 ай бұрын

Durability is my main concern

@alanconner8514 2 ай бұрын

Try locking a full width container on top of two 1/2 width containers.. it won’t fit.. Which would help stabilize a taller stack if you have multiple 1/2 width containers.. by putting a full width on top… No idea if that makes sense in text ..😂😂

@Peter-hg2oc 2 ай бұрын

Can you add the bins to the drawers?

@TechMadeEzy 2 ай бұрын

Clarify please

@Peter-hg2oc 2 ай бұрын

@@TechMadeEzyI was wondering if the bins in the organiser unit also fit in the drawer unit instead of the dividers?

@TechMadeEzy 2 ай бұрын

Hi possibly the smaller ones but it’s not made for it, the large ones are too high.

@Peter-hg2oc 2 ай бұрын

@@TechMadeEzy Maybe they could be supplied as an extra accessory? Or 3d print some to suit.

@TechMadeEzy 2 ай бұрын

Interesting

@guustvanuden2968 3 ай бұрын

we need a drawer thats big enough to put a circular saw or tracksaw in

@TechMadeEzy 3 ай бұрын

Hi Guust they are coming this summer

@guustvanuden2968 3 ай бұрын

@@TechMadeEzy that is great news!

@yass302 3 ай бұрын

Can i ask how much the total price u payed for all of this!?

@TechMadeEzy 3 ай бұрын

Alot but quality is worth it

@wt9653 5 ай бұрын

The tops of the box seems like a water catcher during rain. Do they have drain in the back? I see some sort of slit. Looks like a best in the market. Lowes now have two great tool chest systems. Toughbuilt and Flex.

@TechMadeEzy 5 ай бұрын

Yes it’s in the video, water will channel through and not inside

@MONEYZ123 5 ай бұрын

Someone didn't watch the whole video. tsk tsk..

@TechMadeEzy 5 ай бұрын

Tell em! Lol 😂

@wt9653 5 ай бұрын

I only watched the 1st 2 minutes 😆

@TechMadeEzy 5 ай бұрын

Then you missed alot.

@stevenfoust3782 5 ай бұрын

Your complaint about nothing fitting on top of two small boxes is unfounded. All systems are like that. I guess they could have redesigned the lids on the small boxes. I’d say these boxes are very good.

@TechMadeEzy 5 ай бұрын

Hi, They are working on an adapter plate, actually allowing users to put half boxes down lower

@derekb7260 2 ай бұрын

No locks ??!?! I guess we know who will be missing half his tools by the end of the work day.

@jameswalsh3776 5 ай бұрын

If it doesnt come with a Rack thats like Dewalt 1.0 Rack than I dont want it

@TechMadeEzy 5 ай бұрын

They have more launching spring and summer, kills me because I need larger drawers, ( that doesn't sound right )

@blahber222 5 ай бұрын

they laid off quite a few of their designers last year and their stock is extremely low. i love their design tho

@TechMadeEzy 5 ай бұрын

Agree nice design and locking system

@cuchanu 5 ай бұрын

Seems like a pretty nice system, but some of the accessories are definitely overpriced. Which implies that the whole system is overpriced although it's kind of hard to know how much it cost to make in comparison to something like the rigid system which I have had and loved for years. But Ridgid has neglected their system I feel.

@TechMadeEzy 5 ай бұрын

So far just looking at all the systems out there this is definitely in my eyes the most durable and it obviously has a very easy Locking System

@rodgerneeb301 5 ай бұрын

If you like Black, Milwaukee in England is black, and I understand they are thinking about bringing black to the United States soon.

@TechMadeEzy 5 ай бұрын

I wish it was local, thanks buddy

@Bertg1982 5 ай бұрын

Why does everyone overlook the fact that these system except for packout and stack pack have no locking mechanism on the drawers? How honest do these manufacturers think guys are on jobsites?

@ThinkTankIllustration 3 ай бұрын

If you can't lock the drawer system, you're not good for on the job.

@TechMadeEzy 3 ай бұрын

I think some accessories are coming out and I think there were some people actually making some using a 3-D printer. You might be able to find online.