Teddy bear Snow globe in RESIN

No video

Teddy bear Snow globe in RESIN - Christmas Idea

Рет қаралды 10,356

Күн бұрын

Hi I'm Wendy a resin artist and crafter.
In this Video I make a DIY teddy bear snow globe and for the first time I demould in front of the camera so YOU can see it first. It shows the process at all stages and I hope it will help you to create a snow globe of your own. You could use a number of different types of moulds for this. I chose a bear, but there are plenty of 3d moulds on the market.
Please tag me if you do follow this process as I would love to see the results.
I had the Idea for this from Louise Singleton Creations pyramid snow globe. Please check her out, she is a very talented crafter, the Link is below. Comments are always welcome.
Thanks for watching
Louise Singleton Creations / @louisesingletoncreations
Epidemic sounds music www.epidemicso...
Resin8 white www.resin8.co.uk/
Glycerine and water www.flavourart...
New Mask www.mysafetyge...
AFFILIATE SHOP LINK BELOW
As an Amazon Associate I earn from qualifying purchases
These link below will not cost you any more than the store price but I will receive a little help for my channel. Thank you
www.amazon.co....

Пікірлер: 163

@calissaobviouslycannotdeci7419 3 жыл бұрын

That has to be one of the coolest ideas ever! I was dying and yelling.... Hurry up Wendy, get the head out! The anticipation was killing me. Then I was like OMG! How cool is THAT! Great job. XOXO

@Toonpish 3 жыл бұрын

Hehe thanks so much, it was hard to demould the first time. And didn't want to mess it up in front of the camera 😂😂😂 but I've done another one since and it was a lot easier ☺️. Glad you enjoyed it. 😘

@genettejennings5537 Жыл бұрын

The fight was real. Love it. What a cool idea.

@Toonpish Жыл бұрын

Thank you Genette 😂😂😂

@ownsacat 2 жыл бұрын

This is so cute. Years ago I made a snowman snow globe with a small DIY snow globe and oven bake clay. Entered it in the state fair. Won some ribbon. I have always loved snow globes, and snowmen. This teddy is real good. Top notch. Its better quality then they sell in the fancy stores even. definitely professional quality. And I just have to say, when I see your smile at the beginning of your videos, it warms my heart.

@Toonpish 2 жыл бұрын

Aww that’s so kind of you June 😀😀 it was a lot of fun and I made a couple more after but the first one is special 😀😀😀 thanks for commenting I really appreciate it 🤗🥰

@mizzuzie3338 2 жыл бұрын

I'd seen him in the intro and finally got around to watch the video. The silicone plug was pure genious and the crystal effect of the head hides that it's a cylinder and not a sphere inside too.

@Toonpish 2 жыл бұрын

😊😊😊 one of my better ideas 😂😂😂 I actually love him. Thank you so much 😊

@debraleblanc6122 Жыл бұрын

So whimsical, playful and classy. Great job! 😉

@Toonpish Жыл бұрын

Thank you! 😊

@margueritejewett7355 Жыл бұрын

VERY COOL WENDY AND A GREAT GIFT IDEA TOO . I LOVE HOW YOU TURNED IT INTO A SNOW GLOBE SO CREATIVELY . YOU ARE SO GIFTED WENDY . I LOVE IT .

@Toonpish Жыл бұрын

I just love trying things out 😀😀😀😀

@Embracetherandom Жыл бұрын

All i keep saying out loud “she is so damn smart!” Love all your videos thanks for sharing your extensive knowledge!

@Toonpish Жыл бұрын

I don’t think my husband agrees with you but what does he know 😂😂😂😂 thank you so much Debra 😀❤️👍

@jaynegriffiths1894 7 ай бұрын

How adorable is this bear he’s fabulous

@Toonpish 7 ай бұрын

Thank you Jayne 😀💜

@ilsabailey8195 Жыл бұрын

Had to stick around and watch this video the title was intriguing. WOW, just how cool is that. What a great idea

@Toonpish Жыл бұрын

Thank you so much Lisa 😀😀😀 one of my favourite pieces to be honest 😀😀💜👍

@margueritejewett7355 2 жыл бұрын

SO VERY COOL WENDY . WHAT A GREAT JOB , I LOVE THE OUTCOME OF THIS PROJECT YOU CREATED . SO SMART AND A FANTASTIC IDEA . LOVE IT !!!!!!!!!!!!!!!! HAPPY RESINING TO YOU . THANKYOU FOR SHARING WITH US ..

@Toonpish 2 жыл бұрын

Totally welcome as always Marguerite 😀👍❤️

@ilsabailey8195 Жыл бұрын

The turtle is too cute

@Toonpish Жыл бұрын

😀😀😀 where is the Turtle? 🤔🤭

@ilsabailey8195 Жыл бұрын

@@Toonpish HAHAH Wendy so that's where that comment ended up. I was watching an older video (random) where you were making some small trays with lights in them and a smaller one with a cute little turtle that you placed on top of it all. I was having net issues and the video switched over to a new one while I was commenting and before I could try and figure out what was happening it crashed altogether. 🤪

@Toonpish Жыл бұрын

😂😂😂 well I know that video as it was my very first one and yes the turtle was cute 😀😀😀 Thank you for commenting and although it was in a different place I still really appreciate it 😀💜💜

@ashleywest5599 2 жыл бұрын

you said you don't normally do stuff like this and I instantly said please do more!! I love it!!! ❤❤

@Toonpish 2 жыл бұрын

😊😊 thank you so much for your heartwarming comment 😊😀 Maybe I should Ashley 😀😀😀👍❤️

@joanstone4162 Жыл бұрын

What a great idea! It turned out great.

@Toonpish Жыл бұрын

Thank you so much Joan 😀😀❤️🎉

@pearlmoon6326 3 жыл бұрын

You are BRILLIANT!!!

@Toonpish 3 жыл бұрын

Lol. A moment of inspiration 🤣. It doesn't happen often 🤣. Thanks so much 😁😁😁😁👍

@Coyo-Tea Жыл бұрын

That is PAWESOME. ♥️

@Toonpish Жыл бұрын

😂😂😂 thank you ❤️👍

@virginiarichards6872 Жыл бұрын

That worked out beautifully, yay you!

@Toonpish Жыл бұрын

Thanks Virginia 😀😀💜

@adaperez4770 Жыл бұрын

OMG. I love him

@Toonpish Жыл бұрын

Thank you so much Boo boo 😀😀❤️👍

@nemesizmuzik246 2 жыл бұрын

This one is very creative, I love it.

@Toonpish 2 жыл бұрын

Thank you so much 😊 😀👍 It’s appreciated ❤️

@genevafraser5859 Жыл бұрын

I love him you could make the body in personal colours for gifts

@Toonpish Жыл бұрын

Yes you definitely could 😀😀👍 thanks Geneva ❤️

@cecilabryant6466 2 жыл бұрын

OMG he is so cute!!! I love it!

@Toonpish 2 жыл бұрын

Thank you so much Cecila 😀😀😀😀👍❤️

@gloriagreer3218 3 жыл бұрын

I'm so glad I found your channel!! This bear is incredible. I like the way your mind works! I'll be watching the rest of your videos.

@Toonpish 3 жыл бұрын

Aww thanks so very much, I had a moment of inspiration with this piece I think lol. I do love it and I hope the rest of the channel is as good 😊. Thanks so much for subbing 👌😁👍

@junek1006 2 жыл бұрын

that is very original. I love it!

@Toonpish 2 жыл бұрын

Thank you so much June 😀😀👍❤️

@MicheleHappyBunny Жыл бұрын

This is absolutely amazing!!!! Xxx

@Toonpish Жыл бұрын

Thank you so very much Michele 😀😀❤️

@lorrainestewart997 Жыл бұрын

Stunning really love these ❤❤❤❤ xx

@Toonpish Жыл бұрын

Thank you so much 😀💜

@SkitchBean_aka_Christine_E 9 ай бұрын

Wendy, these turned out so really cute. You need to revisit this and make another one. If you haven't already. 😂 . He look like a cross between a teddy bear and a polar bear. White body, features of a teddy bear. ❤❤❤

@Toonpish 9 ай бұрын

This might work with the bottle 🤔😀 would be interesting 💜💜👍

@mikaylasaunders1048 Ай бұрын

Yes I’m 3 years late to the bear party, but WOW!! He’s just gorgeous, I’m currently working through Christmas pieces as I’ve got surgery impending, I think I need to add some of these to my inventory. So grateful for all your fantastic videos, ideas and tips ❤

@Toonpish Ай бұрын

So glad you enjoyed it 😀😀😀 I have plenty more snow globe videos around too 😀😀❤️👍

@twistedimaginings Ай бұрын

That's awesome! Nicking it 😂😂😂😂 ❤

@Toonpish Ай бұрын

Fabulous 😀😀👍❤️

@tishsmiddy71 Жыл бұрын

Thank you for sharing ❤️💋🎉

@Toonpish Жыл бұрын

You are very welcome 😀😀❤️👍

@Twiggymack48 2 жыл бұрын

I just love it, so cute

@Toonpish 2 жыл бұрын

Must admit it is one of my favourite one ❤️❤️❤️❤️❤️

@brandyboston9363 10 ай бұрын

Inspirin to see you were nervous at first too and now you are a queen at resin.❤😂🎉

@Toonpish 10 ай бұрын

😂😂 oh I was 😂😂 you gotta start somewhere 💜💜💜👍

@deeznuts_808 3 жыл бұрын

Subscribed. Can't wait to watch all your tutorials.. Aloha 🤙

@Toonpish 3 жыл бұрын

Welcome aboard 😃. I hope you enjoy watching as much as I enjoy creating. Hello 👋 Dee.

@stacy_thecraftycat6611 3 жыл бұрын

I love this! So going to try this!

@Toonpish 3 жыл бұрын

That’s brilliant. Good luck and have fun with it. 😀😀😀😀😀😀👍❤️

@dianewarde6074 2 жыл бұрын

I just started getting into resin, and found your channel. You have such great creative ideas! love this one! Thanks, Wendy!❤

@Toonpish 2 жыл бұрын

You are Totally welcome hun 😀😀😀 Welcome to my little channel 😀 I hope I can keep you entertained and inspired 😀👍 Actually I love this one too ☺️

@Becky_lou_smuling Жыл бұрын

Love this ❤

@Toonpish Жыл бұрын

Thank you Becky 😀👍💜

@sugargmum4517 Жыл бұрын

I love the way you done this (my mum would love this ) Christmas is getting closer lol 😍😍 you had me in stitches watching you get the bear out of the mold as i can relate to this 😂😂

@Toonpish Жыл бұрын

Thanks Lisa 😀😀😀 ofc I know now that alcohol really helps 😂😂😂 but you live and learn don’t you 🤷‍♀️😳😀 I did enjoy making this and it is still one of my favourites 😀😀😂👍

@rosemarywilliams5136 2 жыл бұрын

Beautiful

@Toonpish 2 жыл бұрын

Thank you so much Rosemary 😀👍

@LisaVornhagen 2 жыл бұрын

That is so cute! I love it! I know how difficult it can be getting the head out of the mold. I have a cat mold with a large head and it is a pain to get out but so cute!

@Toonpish 2 жыл бұрын

Thank you so much Lisa😀😀 I have found since making this that a little soapy water or a spray of alcohol massaged in will help pop out the resin so easily. Have a try 😀😀 it’s so much easier 😀👍❤️

@herbsscrollingstation5270 3 жыл бұрын

Looks awesome

@Toonpish 3 жыл бұрын

Thanks Herb 👍😁👌

@jeannehinrichs5734 3 жыл бұрын

cool idea awesome

@Toonpish 3 жыл бұрын

Thanks very much 😁👍

@AndreamTipping 9 ай бұрын

Stunning 😍

@Toonpish 9 ай бұрын

Thank you! 😊😀😀💙

@TheBeardx16 3 жыл бұрын

Really Cool Wendy enjoyed that

@Toonpish 3 жыл бұрын

Thanks honey. Very kind of you 😁👍

@stevenjobbins2600 3 жыл бұрын

Wendy your enthusiasm is so refreshing and that bear is brilliant

@Toonpish 3 жыл бұрын

Hehe thanks so much 😁😁 hope I'm not too "in your face" nutty 😂😂😂😂 I'm just that person ROFL 😂

@stevenjobbins2600 3 жыл бұрын

@@Toonpish Far from it their is so much doom and gloom in the world I love some humor and friendly banter x

@Toonpish 3 жыл бұрын

@@stevenjobbins2600 gdgd 👍😁😁😁😁

@pamgillum5689 2 жыл бұрын

I totally sympathize with the difficulties of removing the mold…

@Toonpish 2 жыл бұрын

😂😂😂 I’ve since found an easier way 😮 Just put either soapy water or alcohol down the sides of it and massage it well. It pops out 😀😀😀👍❤️

@lizzie511958 Жыл бұрын

Gorgeous 😊

@Toonpish Жыл бұрын

Thank you 😊

@Jeepsy_Soul95 3 жыл бұрын

Absolutely adorable!! Live the way that turned out!!

@Toonpish 3 жыл бұрын

Thanks so much! 😊

@joycepugh5347 7 ай бұрын

so very cool

@Toonpish 7 ай бұрын

Thank you Joyce 😀💜

@trishscreativecrafts 3 жыл бұрын

That is one of the coolest resin pieces I've ever seen! Such a great idea! Love it! I want to dress the bear up... put like a little scarf around his neck! LOL.

@Toonpish 3 жыл бұрын

Lol I never thought of a scarf 🤣. Might have to do that now 😂. Thanks honey ❤️

@ClairesCraftyCorner 3 жыл бұрын

Sorry I've missed so much ... just catching up now ❤❤❤ gonna carry on watching xx

@ClairesCraftyCorner 3 жыл бұрын

Ahhhhh love it Wendy !!! Really love it !! Such a cool Bear 😍😍😍😍😍 and genius trick to make it in to a snow globe 😍😍

@Toonpish 3 жыл бұрын

Aww thanks so much Claire. It could be adapted for so many moulds too. I'm so glad you liked it honey. 🥰🥰🥰

@Toonpish 3 жыл бұрын

Don't worry, but thanks so much.,👍👍👍😁

@validwithoutphoto1389 3 жыл бұрын

This is one of the funnest videos I’ve watched in a while! Love this idea! I’m pretty sure I have this mold and a bunny and a deer I could try this on! Thank you!!! 😍😍😍

@Toonpish 3 жыл бұрын

Yey. I must admit it’s one of my favourites too. I would love to see your results 😀😀😀😀👍

@lorrainestewart997 Жыл бұрын

Awfy bonny xx❤❤❤

@Toonpish Жыл бұрын

😀😀💜 thank you 😊

@zerozilchnada5373 3 жыл бұрын

I have him in one of my carts. You did a great job, hes so adorable. Tfs hun 🦉🎨

@Toonpish 3 жыл бұрын

It's not that hard to do, just working things out is the hard part lol. Thanks Owl 🦉

@deeaguilar2183 3 жыл бұрын

He came out amazing!

@Toonpish 3 жыл бұрын

Thanks so much. I do love him 😊😁😁😁👍

@TheMessyStudio 3 жыл бұрын

That's really cool, Wendy!

@Toonpish 3 жыл бұрын

Thanks very much Billy 💕. You are always so kind to me 😘

@chantalcross5737 3 жыл бұрын

Ahhh bless you. I'm so happy for you. He_is_cuuuute. Blimey, between you and claire's crafty Corner, you're keeping me busy on KZfaq!!!

@Toonpish 3 жыл бұрын

Aww thanks. CCC is brilliant in so many crafts. Don't worry about TV just stay on KZfaq 🤣🤣🤣 thanks for watching 😘

@katrinao Жыл бұрын

I enjoyed doing mine. Altho your colouring looks better than mine. I'll have another go only done 1. I was surprised at the amount of resin it took. I'd like to put lights in one

@Toonpish Жыл бұрын

Sounds great to me 😀😀 have fun 💜

@Toonpish Күн бұрын

Sounds amazing 😀😀💜👍

@meduza65 3 жыл бұрын

To demold easier, soak in soapy water and they will pop right out.

@Toonpish 3 жыл бұрын

Yes I know now 🤣🤣🤣 thank you for telling me though 😃 was funny 😅👍🙂

@DreamItbyAle 3 жыл бұрын

Está súper bonitooooooo 😍

@Toonpish 3 жыл бұрын

Gracias 😁👍❤️

@sharonthorpe8661 Жыл бұрын

❤ where can I get that mold please it is so nice to see an English Lady doing tutorials 😊

@Toonpish Жыл бұрын

I will link it in my Amazon store front if it’s not there already. The store front link is in the description box. Hope that helps 😀❤️👍

@LouiseSingletonCreations 3 жыл бұрын

Wendy, he is great! I like the way your mind works, the skewer idea was great! Were you happy with the movement of the glitter? I have struggled to find a glycerin to water ratio that I am happy with. I tried one with just baby oil and have no movement at all so I won’t be dong that again lol. Thank you for the mention again Honey xx

@Toonpish 3 жыл бұрын

Yes the movement is absolutely fine. The flavourart liquid ratio is perfect (although meant for ecigs 😂) and works perfectly. The silver micro balls are glass and fall while the plastic pieces float so it's a good ratio too. You are more than welcome honey. Take care 😘

@BlueSnowLeopard1 Жыл бұрын

could you also do the cavity with one of those small sphere molds? just wondering

@Toonpish Жыл бұрын

You could yes 😀 as long as you put weight in it 😀❤️👍

@BlueSnowLeopard1 Жыл бұрын

@@Toonpish thanks you so much for your feedback. it really helps a lot n.n

@Toonpish Жыл бұрын

Np 😀😀

@clarewardrope2413 3 жыл бұрын

Hi Huni, I came back to watch this again. If I knew how to contact you privately I would. Is there any chance that you could sell the wee insert for the head? I'd love to make these for the kids at Christmas. Thanks Wendy xx

@Toonpish 3 жыл бұрын

Hi Clare. If you have Instagram you can contact me on there with a direct message? Or find Toonpish on Facebook, though I’m not really great with that tbh 🤦‍♀️ I don’t have any silicone at the moment so can’t make an insert but I’m sure you could do it. 👍

@kellygallo1075 3 жыл бұрын

I did head with uv resin each side..glycerine n water plastic mini pearls to the neck clear film then resined body..hard work lol

@Toonpish 3 жыл бұрын

Thank really sounds like a lot of work. But did you like the results?

@kellygallo1075 3 жыл бұрын

@@Toonpish loved it

@Toonpish 3 жыл бұрын

Perfect 👌 ❤️

@karenkotyk8011 Жыл бұрын

I have a very honest question, why wouldn’t you just put the glycerine water in before you put the plaster?

@Toonpish Жыл бұрын

Because you will get a better air bubble for sure 😀😀 and when sealing the area it needs to be dry. Plus knowing me I would more than likely tip it over 😂😂😂😂

@karenkotyk8011 Жыл бұрын

I love this little bear and I have never done resin…this project of yours makes me really want to try. Maybe something easier to begin with.

@Toonpish Жыл бұрын

Resin is quite scary at first because of the dos and don’t but there are lots of videos on KZfaq to help 😀😀 Thank you so much Karen 💜💜💜

@elliewilliams4131 3 жыл бұрын

my heart stopped when you said you where gonna put silicon in at 1st cos silicon sticks to silicon as we know so i did find myself thinking OMG what are you doing lol but hes turned out fab!!! you need to leave just a small sort of are hole so things can move about so next time dont fill the fluid right to the top but omg hes quite, im still scared of 3d moulds cos i have seen so many with under the head just nothing but bubbles or holes and i would prob get that issue lol how do you stop it from doing that?

@Toonpish 3 жыл бұрын

One thing I do is 'oik' them out with a bent piece of wire 🤣🤣🤣 then they would go in my pressure pot. Gets rid of any I've missed. Thanks so much again Ellie. 👍😀

@elliewilliams4131 3 жыл бұрын

@@Toonpish havent got one of them no as posh as u haha

@Toonpish 3 жыл бұрын

@@elliewilliams4131 😂😂😂😂😂

@Tracy_Cal74 3 жыл бұрын

Advice welcome from anyone please! I want to make this teddy clear with rainbow glitter added. I then want to set a resin heart, coloured pink with added ashes into the bears tummy. My question is where do I buy all the moulds, etc, and how do I complete this project? Never worked with resin before, so total newbie! I was going to buy one from Etsy but they are over £40! Worth making my own? Thanks in advance 🙂

@Toonpish 3 жыл бұрын

Hello Tracy. I got this bear mould from wish and it was very cheep indeed. I know they are also sold on Ali express and maybe even Amazon. Only a few pounds so have a look around. As for your project. You need to make it in layers. Have a look at some pyramid videos to get the idea of how things are put into layers. Good luck and have fun 😃👍

@rosemarywilliams5136 2 жыл бұрын

What did you put in te face of the bear clear silicone

@Toonpish 2 жыл бұрын

A silicone plug that I made. 😀😀 I think that answers your question 👍😀

@karenscarsbrook8461 3 жыл бұрын

brilliant video, i wonder if you could give me some advise. i want to do the normal teddy mold but i want to put my dads ashes in the ears and feet, how would i go about that, or how could i colour the ears and feet? tia x

@Toonpish 3 жыл бұрын

Ok looking quickly at the mould and if it was me I would do each each separately and have the mould propped up at an angle so the resin would completely fill the ear. When it comes to the feet, perhaps a hot glue or plexiglass damb with hot glue. That would be how I would tackle this. Good luck 😃

@karenscarsbrook8461 3 жыл бұрын

@@Toonpish thanks for that I'm not sure what you mean by a damb? Would you do the mica powder with achohol if I wanted the ears coloured?

@Toonpish 3 жыл бұрын

@@karenscarsbrook8461 not for that, I would use the mica powder in the resin. What I mean by a damb is something to hold back the resin in the area you want to keep it. Hot glue works well because it will peel off cured resin 👍

@karenscarsbrook8461 3 жыл бұрын

@@Toonpish ahh im new to resin so im just learning, ive seen so many lovely teddys that have their ears coloured and feet, but can find any videos on how to do it, dont want to waste any resin as its expensive.

@Toonpish 3 жыл бұрын

@@karenscarsbrook8461 it is very expensive and it hurts when it goes wrong. You will have those days as we all do. But don't give up. Wear your PPE and have fun with it. 👍

@cmmc3400 Жыл бұрын

I want to tell everyone that crafting with resin causes micro plastic contamination in water. If you don't think you resin waste isn't a problem keep this in mind, most landfills are near water. Wild animals are affected by human habitat encroachment and by the waste that eventually becomes a contaminate in our environment. Find out if your town does Hazardous Material day(s) and follow their directions about disposal. In the meantime, use a container that can be sealed well to collect your crafting waste..the future thanks you!

@Toonpish Жыл бұрын

I will keep that in mind 😀💜

@rosemarywilliams5136 2 жыл бұрын

Oops I mean resin

@Toonpish 2 жыл бұрын

Yes resin 👍😀

@dnsb5548 3 жыл бұрын

Guys can someone please help.. I made two bears but they came out full of bubbles.. I tried everything alcohol let the resin set but nothing seems to work 🥺

@Toonpish 3 жыл бұрын

Can I ask what resin you are using? also was it warm enough where you are? it sounds like a combination of those two things. but without knowing the answers I can't help any further. However I will say that bubbles will get trapped under the bears head-neck area because it is an undercut. you can bend a paper clip round and get the bubbles out that way.