Tekno ET410.2 - Build Review - Everything YOU Need to Know!

Рет қаралды 17,916

Күн бұрын

Here's my full Build Review on the Tekno ET410.2 - 1/110th scale 4wd Truggy Kit. How the build went, what you'll need to build, tools, fluids, owners manual, issues, differences between this and the ET410 and my overall thoughts on the new kit.
Get your ET410.2 here (pricing): bit.ly/3iULp6x
✦Connect with The RCNetwork✦
Don't miss out on more RC blogs, pics, and newsletter from
TheRCNetwork.com. Get the stuff that's not on KZfaq!
Subscribe today: www.thercnetwork.com/subscribe...
Instagram: / the_rcnetwork
Facebook: / theofficialrcnetwork
✦Get The RCNetwork Decals and Hats✦
Click to Shop: www.thercnetwork.com/the-rcnet...
✦Get RC Product Recommendations✦
Visit The RCNetwork's Amazon Page:
www.amazon.com/shop/thercnetwork
✦My Video Gear✦
Studio Camera: amzn.to/2a0que9
Studio Tripod: amzn.to/29VIZ89
Studio Lights: amzn.to/2a4Ecmb
SD Cards for Studio Cam: amzn.to/2acPqSS
Lavalier Mic: amzn.to/2acOjCO
Action Camera: amzn.to/2a94Sfv
Action Mic: amzn.to/2aoZOpF
SD Cards for Action Cam: amzn.to/2a946PB
#thercnetwork #TeknoRC #ET410.2 #ET4102 #rc #radiocontrol #rccar #rccars #remotecontrol #hobby #rchobby #rcracing #rctrucks #rcnews
“TheRCNetwork.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.”

Пікірлер: 73

@TheAZCOMA 4 жыл бұрын

Dude you have the best KZfaq videos when it comes to RC hands down! I love that you build all different chassis not just the ones you're sponsored by

@TheRCNetwork 4 жыл бұрын

Thanks Kacey - I appreciate it! I try and dabble in all genre's of surface RC....Also, a side note - If you see an unboxing, then nothing (no review, running, etc) likely the car was not to what I would expect or recommend to my audience

@KelseyShemeley 4 жыл бұрын

Looking forward to getting mine. Awesome review Rich. 👍🏻

@TheRCNetwork 4 жыл бұрын

Thanks Kelsey. Just dropping electronics in mine now

@wootwootjr 2 жыл бұрын

I need you to come back man :/ you made such great informational videos

@TheRCNetwork 2 жыл бұрын

Hey! I'm always checking comments still....just out of the loop on RC stuff these days. It's actually a good thing for me (I was knee deep)

@CryptoJoeTrading 4 жыл бұрын

outstanding video as always!

@TheRCNetwork 4 жыл бұрын

Thanks Joe!

@ReadySetRC 4 жыл бұрын

As always great review👍👍

@TheRCNetwork 4 жыл бұрын

Thanks buddy!

@gpaje 4 жыл бұрын

This is my favorite RC in the 1/10th racer class.

@TheRCNetwork 4 жыл бұрын

Yep, its so fun ton drive!

@GreatLakesRC 4 жыл бұрын

Really nice presentation 👌 Love a Tekno 🤩 They make some nice upgrades 👍

@TheRCNetwork 4 жыл бұрын

Thanks GLRC! Tekno is great stuff!

@jokersnyderracing9458 4 жыл бұрын

Great informative video as always buddy! Now you are making me want to buy another one. I have a nice painted LFR body for my old ET if you want it

@TheRCNetwork 4 жыл бұрын

Thanks Buddy! I'm painting up a freshy!

@PakyuzRcMalaysia Жыл бұрын

Love Your blue and white theme

@TheRCNetwork Жыл бұрын

Thanks buddy - it morphed over the years, but very easy to see on the track

@germanrctrackdays4277 3 жыл бұрын

Super Video!

@TheRCNetwork 3 жыл бұрын

Thanks buddy!

@nathanlengyel9235 Жыл бұрын

Excellent vid man! I was watching to see short comings if there might be any. This is a perfect video for someone who's building there first kit; which seems to be common nowadays. Great work!

@TheRCNetwork Жыл бұрын

Thanks for stopping by! If it's Tekno, you know it's good! Just get an aluminum servo horn and you're good.

@djr8505 4 жыл бұрын

Looks great. As an EB owner I am seriously considering upgrading to the new Spindle carriers on the front end

@TheRCNetwork 4 жыл бұрын

Yep, it's a great upgrade for the EB

@Ev0ltion 2 жыл бұрын

Hello, Do you have any information on the shock length on this truggy? Im looking for a replacement for a custom build.

@timjs1018 3 жыл бұрын

Question: On Step J-6, what are the "risers" they refer to? Also I don't see the center-hole insert in my kit...

@GOjira_max 2 жыл бұрын

What spares/upgrades would you recommend for those that would use this for bashing? We don't have a local carrier of any 1/10 truggy and I'd like to buy the kit and spares in one go to save shipping.

@TheRCNetwork 2 жыл бұрын

The ET410 is a tough platform - I'd run SCT wheels and tires for bashing and then, just make sure you're running a solid motor like a Tekin Pro2 or even a 4 pole SCT 540 motor. The only thing that you may consider for spares would be front bulkhead and hingpins, but it depends on how your driving is

@johnnycash7803 3 жыл бұрын

I'm trying the premiere blue on my red diff o rings..I put the black grease on the outdrive but put the blue grease on the o rings. Have you tryed that or just used the blue grease for shock seals?

@TheRCNetwork 3 жыл бұрын

you should be good either product is fine. But the blue stuff on the shock seals only

@johnnycash7803 3 жыл бұрын

@@TheRCNetwork so you can put the premier blue on the diff orings??

@johnnycash7803 3 жыл бұрын

@@TheRCNetwork so you can put the premier blue on the diff orings??

@humblerc841 4 жыл бұрын

Dang, you been busy!

@TheRCNetwork 4 жыл бұрын

Tell me about it! I got word on this and the Arrma all right before I left on vacation...I had to pump out 3 videos in about 2 days....AND build this car!

@laprizzle7587 3 жыл бұрын

I've got a 3652 4000kv ezrun combo sitting on a shelf...think that kv is too high for this truggy on 3s?

@TheRCNetwork 3 жыл бұрын

Yes it is, imo. It will be pretty decent on 2s though. I ran a 5100kv on 2s and it was a missle

@johnnycash7803 3 жыл бұрын

@@TheRCNetwork that's what I'm putting in it I had branf new in the box laying around. It will be quick enough on 2s? Was gonna put a 17 tooth pinion in it. Does that seem OK?

@tylerchecchio2058 2 жыл бұрын

What pinion gear did you use?

@TheRCNetwork 2 жыл бұрын

15t

@Mxoderberg 4 жыл бұрын

It looks so good! I want one, but I don't race. Is it a shame to get one just for fun and bash or is too delicate?

@longboardguy 4 жыл бұрын

Mathias Söderberg would be an awesome little truck to run around. Tekno is anything but delicate. My EB48.4 1/8 buggy takes a harder beating and walks away from a day of bashing then my Arrma Typhon 6S! And they just fly threw the air so well they are so balanced and well engineered. Light weight also. You really don’t see what your missing until you drive one as I found out now I’m sold on Tekno. I want a ET 1/8 truggy or the MT410 next I think. I thought about this smaller truggy for the yard!

@TheRCNetwork 4 жыл бұрын

Like LBG said, the ET410.2 is a solid truggy and very durable!

@kenf4017 4 жыл бұрын

Does anyone knows where to purchase the atomik v2mr, I am having a really hard time finding it, thanks.

@TheRCNetwork 4 жыл бұрын

It was discontinued right after that budget build, as they sold out. I felt bad and even gave mine away on my channel

@kenf4017 4 жыл бұрын

Ok, that's why I can't find one. I came back to the RC car hobby after being out of it for 20 years. What affordable rc cars do you recommend? Thanks for the info, you have a good channel so I just subscribed.

@clickybread 4 жыл бұрын

What is the stock motor for this car?

@TheRCNetwork 4 жыл бұрын

Some tracks run a 10.5t class

@justintolhurst263 4 жыл бұрын

Nice vid, the 0609 is definitely one of my favorite zts

@TheRCNetwork 4 жыл бұрын

Thanks. Yep, the bronze 0609 is one of my EDC's. I also have the BLUBLK Sprint run

@justintolhurst263 4 жыл бұрын

@@TheRCNetwork nice! I've been trying to find a blublk for a while, I've got the bronze, pur and blk

@michaelchristensen6884 4 жыл бұрын

What do you do with all the cars and trucks you get?

@TheRCNetwork 4 жыл бұрын

I keep them, depending on the RC.....then either sell/trade/give them away

@michaelchristensen6884 4 жыл бұрын

@@TheRCNetwork very cool, so you get to drive them all, such a great job!

@hanau73 4 жыл бұрын

550 size motor fit??

@TheRCNetwork 4 жыл бұрын

It can, but it's not needed in the ET410/2 - It can take a 540 sized 4 pole and keep the side to side weight balance better

@mxr7586 4 жыл бұрын

Why does the body look different from other 410.2’s? And the painted blue and white is a different body compared to the clear one in the video

@TheRCNetwork 4 жыл бұрын

Not sure, they look the same to me...

@ryanchu2288 3 жыл бұрын

do u think i could run a 5.5t motor on this?

@TheRCNetwork 3 жыл бұрын

That's what I ended up running

@ryanchu2288 3 жыл бұрын

@@TheRCNetwork how fast was it 😮😮

@michaelbonham5497 4 жыл бұрын

1/10 truggy class, what would be in its class?

@TheRCNetwork 4 жыл бұрын

Some tracks have SCT in that class if both are too small

@majortomtogc 4 жыл бұрын

Velocity RC makes a conversion kit for the B64.

@alb9022 4 жыл бұрын

Mistake is inverted hinge inserts

@TheRCNetwork 4 жыл бұрын

???

@tjazz5696 4 жыл бұрын

I swear Tekno wants me broke and divorced...

@TheRCNetwork 4 жыл бұрын

Join the club!

@rogerlid2118 4 жыл бұрын

first!

@TheRCNetwork 4 жыл бұрын

Thanks for being 1st!

@jermur8053 4 жыл бұрын

Lost me at wallet.

@TheRCNetwork 4 жыл бұрын

Ridge Wallet helps keep my videos coming out here on KZfaq

@rogerlid2118 4 жыл бұрын

first!

@TheRCNetwork 4 жыл бұрын

Thanks for being first!