Рет қаралды 1,765
How to check the condition of the Epson Sort head or not without having to turn on the printer, this method is very effective to find out the condition of the head so it doesn't cause a short circuit, the condition of the Epson Sort head when installed on a normal printer will cause the Epson printer materboard to die completely, the IC that turns off at because the head sort includes the epson and Tr epson power ic and the head sort flex cable when installed causes quite a lot of losses, with the characteristics when the printer is turned on the condition is totally off, in this video I have tested the Epson head test without turning on the printer so it reduces risk of damage to the printer motherboard, this method applies to printers Epson series L110, L300, L310, L210, L220, L350, L360 and so on, the tool used is quite simple using an analog multi tester with X10 settings, stick the negative / black leg on the pin No. 1 and red / positive leg on foot No. 2 to foot No. 21, if there is no movement of the needle, keep it in good condition i head normal or not sort, if the head sort is marked by the movement of the needle on the multitester