Tesla Model S Full Brake Job & Hub Bearing Replacement
Рет қаралды 3,270
6 ай бұрынThis is my 2013 Tesla Model S 85 project car. The brakes are shot, the calipers have corrosion and bearings are making some noise.
Links:
Brake Pad& Rotor Set: amzn.to/47SMQuI
Hub Bearings: amzn.to/47V6iXD
Use my Tesla referral link if you're ordering a new Tesla for exclusive savings and incentives: www.tesla.com/...
Get your Tesla accessories here: amzn.to/3QXDuqI
My Camera Setup
Gopro Hero12: amzn.to/3IJqAsW
Gopro Media Mod: amzn.to/3THpzIn
Tripod: amzn.to/43qcHt6
DJI Microphone: amzn.to/490Ktqh
DJI Drone: amzn.to/4alB3Xx
Be sure to Like and Subscribe!
Video Links:
Painting the brake calipers: • Painting Brembo Brake ...
Bleeding The Brakes: • How To Change Brake Fl...
Here is a link to the playlist for all the video for this project car: • 2013 Tesla Model S 85 ...
For Promotional opportunities or business inquires email me at: Myksgarage11@gmail.com
#myksgarage
#teslamodels
#teslamodelx
#brembobrake
#brakecaliper
#teslamodely
#teslamodely
#teslamodel3
#teslabattery
The above links are my Amazon affiliate links, Which by using will support the channel. Thank you!
@keithferguson6422 6 ай бұрын
It amazes me how much you know about the mechanica l part without any mechanical background.
@Myksgarage 6 ай бұрын
Appreciate that, this part was not much different than other vehicles so it wasn’t too bad. Thanks for watching!
@scsikid 5 ай бұрын
Tape will only work so long with that parking brake connector. The second you get some decent rain while driving you will get a parking brake failure. Ask me how I know.
@Myksgarage 5 ай бұрын
Thanks for sharing your experience
@djverhulst 6 ай бұрын
I still recommend that you lubricate the slide pins of the brake pads with ceramic grease then you are less likely to corrode
@Myksgarage 6 ай бұрын
Good tip!
@alocar4045 5 ай бұрын
Really enjoyed your well put video Mike! We have a 2014 P85+ that will need to get the front bearings replaced, u inspired me to do it myself :) do you have the link for the front hub bearings?
@Myksgarage 5 ай бұрын
These are the ones I used for the front: www.ebay.com/itm/314039044906?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=RGgc_m9cTWO&sssrc=4429486&ssuid=wd61b5SvTMO&var=&widget_ver=artemis&media=COPY
@GNAUT115 6 ай бұрын
Great job Mike!
@Myksgarage 6 ай бұрын
Thanks buddy!
@gerardshirley460 3 ай бұрын
How much ft-lbs torque did you tighten the axle nuts to?
@Myksgarage 3 ай бұрын
Like 280ft lbs
@shadeven 6 ай бұрын
I’m the first! 😊
@Myksgarage 6 ай бұрын
Welcome!!
Дима Масленников
Рет қаралды 4,3 МЛН
TeslaTravelsAndTroubles
Рет қаралды 3,9 М.
Garage 54
Рет қаралды 4,2 МЛН
Hammabop ustalar.
Рет қаралды 1,1 МЛН
Canal Araucity
Рет қаралды 11 МЛН