Testing 7 More Accessories Tools For Your Hobby Bench

Рет қаралды 25,341

Жыл бұрын

Join My Patreon Here / membership
Get The Small Tip Glue Pen Here amzn.to/3UIuN4d
Get The Glue Pen Here amzn.to/3DWtQ1u
Get The Excel Clamps Here amzn.to/3A5aiqC
Get The Flex-I-File Sander Here amzn.to/3fQsYDp
Get The Stealth Flex-I-File Sander Here amzn.to/3ToPm4F
Get The Needle Sharpener Here spraygunner.com/search.php?se...
Get The Glue Stick Applicator Here amzn.to/3O64ym1
Get The Excel Sanding Stick Here amzn.to/3DTsqVm
Get The Tamiya Anti Static Brush Here amzn.to/3G2KgrD
Get Your Kits And Supplies Here
clarksvillehobbydepot.com?dt_id=87406
Use Coupon Code BARBATOSREX10 at Clarksville Hobby for a discount
Get My Mecha Empire Panel Liners & Paints Here :
gundampros.com
Get Your Gundam Kits Here mechawarehouse.com
Get All Your Airbrush Supplies Here spraygunner.com?aff=10
Follow me on Instagram barbatos_rex65
On Reddit u/Barbatos-Rex
Email triggerfish65@gmail.com
Logo Opener by Free Music | / fm_freemusic. .
Music promoted by www.free-stock-music.com...
Creative Commons Attribution 3.0 Unported License
creativecommons.org/licenses/....
#spraypaint #Gundam #airbrush

Пікірлер: 82

@THROTTLEPOWER Жыл бұрын

Love the Flex - I - File!!!!! 👍👍👍👍

@jaredfinkenbinder Жыл бұрын

You can diy a glue applicator by cutting off part of the eye of a sewing needle to make the fork portion. Stuck the pointy end of the needle into the end of a dowel or pencil to make the handle of the tool.

@richardrussell7082 Жыл бұрын

That's literally what it looks like they sourced to make that applicator.

@bmw128racer Жыл бұрын

Great idea. And probably a lot cheaper than $10.

@jaredfinkenbinder Жыл бұрын

@@bmw128racer just don't tell your wife you hacked one of her sewing needles. LOL

@jaynalley77 Жыл бұрын

First thing I thought of too.

@djvycious Жыл бұрын

Now THIS is a life hack! Love it!

@paulcolterman3087 Жыл бұрын

Paul from NB Canada and i want to fully agree with all the Flexi-i-file stuff! Been using those frames for years and swear by them.

@Zelvii- Жыл бұрын

I absolutely love this little series! The Tamiya brush is really an underrated hero. It's more helpful than people would think.

@MrBobafett5566 Жыл бұрын

Wow..love the Clamps Thx again for the tipsssssssssssssssssssssssssss

@jaredfinkenbinder Жыл бұрын

Limonene is a colorless liquid aliphatic hydrocarbon classified as a cyclic monoterpene, and is the major component in the oil of citrus fruit peels It also used as food flavoring and as a chemical solvent. So it's use in glue is two fold, it smells nice and it can also aid in softening the plastic for joining to other plastic parts.

@apsilonblue Жыл бұрын

It'll also damage rubber which is why you shouldn't use citrus based cleaners on rubber despite the fact they're often advertised as being good to use on vehicles..

@jaredfinkenbinder Жыл бұрын

@@apsilonblue which is also why Armor All turns your tires brown.

@oublik Жыл бұрын

I'm always learning about new tools from you. Thanks

@resteel1525 Жыл бұрын

Love these videos. They are great for listening to in the background without being boring.

@warrenbennett1355 Жыл бұрын

I am so glad you do these videos so helpful thanks so much

@joegkushner Жыл бұрын

you are churning these reviews out. Keep up the good work.

@tonyalvarez486 Жыл бұрын

As always...absolutely great information from a source that I trust! Model On.

@modeltankguy Жыл бұрын

great video love the new AB keep them coming

@mainstay. Жыл бұрын

I really appreciate you reviewing/recommending multiple accessories and tools. 6 this time, I can watch other channels and they spend 15 mins on one - so much fluff and extraneous filler. Watching your channel I get to see tools I've never heard of or tools I wish there was a concise review on. I have bought a couple from your past video and am well pleased with the results. Thanks.

@timcarson8146 Жыл бұрын

Nice video as always. Very informative!

@yotsie32 Жыл бұрын

I've been using the Excel Sanding Sticks for awhile now. I love to control they give to help knock big problems fast. I then follow up with my glass files to get a butter smooth area. I'm glad you featured the clamps, I've been needing some and those were impressive. Great content as always.

@dan-othemando7958 Жыл бұрын

Those Glue Stick Are On My Wish List And Maybe That Airbrush!!

@gioargueta4538 Жыл бұрын

Hahahaha A-10 you are using in the sample of the clamps yeah!!!

@danrussell3439 Жыл бұрын

Very helpful video

@christinley5213 Жыл бұрын

that's sum cool useful stuff!!!! them glue pens..I never knew about them..gotta get me sum!!:)

@DanielRaffetyJr Жыл бұрын

Very cool tools. I especially glad you showed the clamps, those would've really come in handy on my last model. Definitely going to get the clamps, one of those sanders and the antistatic brush. Being that my model working area and woodworking area are all the same large shop room in my basement, that brush will really come in handy. The needle sharpener will also be great because you can just look at a needle wrong and can bend the tip slightly. Thank you 👍

@almac2598 Жыл бұрын

I bought a pair years ago. They are worse than nothing because they pretend to do a job. Binned them.

@JHartModelworks Жыл бұрын

For car mirrors I drill a 0.5 mm hole in the base of the mirror and in the side of the car. I then use CA glue to glue in a 0.5mm metal pin in the base of the mirror. Slide it into the body, and glue the pin to the body from the inside. much cleaner than putting glue on the outside of the body. Great review of some cool products.

@everettmonroe3416 Жыл бұрын

Man, I've used the regular sander for years, works great! Didn't know they had one with a angle, nice.

@komma8203 Жыл бұрын

Been using the Fexi-fit for years, its a realy good product

@user-fo6ud3zs2o Жыл бұрын

шиииикарный канал!..шиииикарные видео!...не теряйтесь.......

@allanlowe9346 Жыл бұрын

You can never have too many tools for model making. Thanks for showing these in your usual informative style Robert . BTW, the SharpenAir bottom( left hand side) holes are for 0.5 needles as the angle is different to the other sizes. You only need to use the right side holes for 0.2, 0.3 etc. Cheers and good health.

@barbatosrex9473 Жыл бұрын

Thanks for the info my friend

@modelmickey Жыл бұрын

Really like the look of the glue pens, just ordered the fine tip one from Amazon UK, only £6 with prime. If you want different sizes of CA glue applicators like the Flexifile one you can cut the end off of a sewing needle leaving half of the eye to form the tip and stick the pointy end in a wooden handle.

@mainstay. Жыл бұрын

Great tip, thanks

@dragoonzen Жыл бұрын

yeah, looking forward to the gold test.

@chrisfoster5717 Жыл бұрын

Very informative videos

@ashfox2012 Жыл бұрын

Just in time for Christmas haha

@richardrussell7082 Жыл бұрын

I first saw those sanding sticks being used, albeit with much finer grit, for Luthier work sanding surface spots on guitar bodies.

@sycoclownx Жыл бұрын

I am excited to see the grex and sparmax videos. I have been wondering if it is time to upgrade my master g79 for something a bit higher end and this will give me a good idea.

@JDsHouseofHobbies Жыл бұрын

ooooo... I might need a second airbrush. I'm using a Iwata TR1 Trigger airbrush and loving it. Like to get a second for priming.

@hinge777 Жыл бұрын

aw man i need that flexi file! my hand was cramping up sanding some things yesterday.

@barbatosrex9473 Жыл бұрын

It's a great tool

@asterchades2082 Жыл бұрын

[D-]Limonene dissolves polystyrene. It's a less aggressive reaction than acetone, but it's enough that it can be used to weld (rather than glue) pieces together with a decent working time. Unlike acetone it also only really does anything to polystyrene, which will limit what you can use it on. Prolonged exposure can eventually near-completely dissolve polystyrene. This is made use of in 3D printing where supports can be printed with HIPS and then removed chemically without affecting the other plastic.

@johnblack9885 Жыл бұрын

I got a bunch of cheap slider clamps at Harbour Freight

@tonymeneses7068 Жыл бұрын

Thanks for making this videos. I have been able to add few accessories based on your reviews.

@barbatosrex9473 Жыл бұрын

You're welcome buddy

@bluechucky Жыл бұрын

I have that sharpen air product. Two in fact. That’s because you need a different one for paasche airbrushes as the tip angle is different.

@themodelhobbyist Жыл бұрын

A great video thanks for the tools review I need to get some of them thanks for sharing. 🙂Thomas over at The Model Hobbyist

@cherokee1995 Жыл бұрын

You can buy the Flex I Files in sets too. They come in a case, so don't have to change the grits all the time.

@peterclegg2609 Жыл бұрын

Great content as always, is the fllexi file only available in the US?

@dtejada1988 Жыл бұрын

Zup, thanks for the vieeo😎👍🏼

@nickgorkov81 Жыл бұрын

Спасибо за обзор ! Ждем видео с аэрографом

@lurkerrekrul Жыл бұрын

Many, many years ago, I got a slightly larger pair of those blue clamps under the X-Acto brand name. To be honest, I never really liked them. I'd put them on something, slide them closed, push up the wedge, and then it would fall off from whatever I was trying to clamp. If whatever you were clamping didn't have flat sides, they didn't stay where you put them. At least they didn't for me.

@imnotvintageimgrumpy586 Жыл бұрын

I have a couple of Grexes and like them but I wish they made a smaller needle.

@LemurKrazy Жыл бұрын

Using an Iwata HP-TR2 in addition to my HP-CS

@PLASTICPOPCORN4 Жыл бұрын

Does the antistatic brush just have a resistor in it?

@CrimsonFlagg Жыл бұрын

I hope all of you are doing well.

@chrismarks4687 Жыл бұрын

I have a badger 150 siphon feed. Looking for gravity fed. What should I buy for around $100? Badger patriot 105? Or badger sotar20/20. I mostly use fine tip on my 150. Or other?

@barbatosrex9473 Жыл бұрын

I use the 105 every day for everything but if you are doing mostly fine work go with the Sotar, you can get different sized needles for it too. Get it here amzn.to/3WNeJjn

@georgestotts2510 Жыл бұрын

I want to get back into doing models again. I have around 10 kits I bought back in the 1980's that I want to do. My thing is I need to get new paint but don't know what to use and where to get them. I live in Canada and not to many places carry model paints. Please help.

@dwgeer13 Жыл бұрын

I wish the Excel sanding sticks would come in finer grits

@patrickcampbell5685 Жыл бұрын

Bifabricated needles. Similar thing we use to administrator smallpox vaccination. Very interesting

@SebastianGomezZana 6 ай бұрын

A glue applicator,Toothpick and away we go.Nice looking gadget but completely redundant

@LuisVazquez-hx3bk Жыл бұрын

I buy from Hobbylinc all my tools and models.

@youcantstopme5136 Жыл бұрын

I need help please help 😭 🙏 where can I find fine point paint pens

@barbatosrex9473 Жыл бұрын

You're looking to purchase fine tipped paint pens? Where are you located?

@youcantstopme5136 Жыл бұрын

@@barbatosrex9473 yes I live in Cincinnati ohio

@barbatosrex9473 Жыл бұрын

@@youcantstopme5136 have you tried Gundam Markers? They have a fine tip option I believe

@youcantstopme5136 Жыл бұрын

@@barbatosrex9473 no I was going to go see if I can find some hopefully I can

@tamsinp7711 Жыл бұрын

Pronunciation of limonene - limm-oh-neen

@robertbuckner2353 Жыл бұрын

Flex-i-file makes some great stuff for modellers.

@dwightatnorthernstar1820 Жыл бұрын

Here's another one....Green Stuff World | Airbrush Paint Strainer

@John_colasante Жыл бұрын

Mr hobby makes a procon boy side feed

@barbatosrex9473 Жыл бұрын

I've had trouble getting one for awhile so I actually forgot that. I'll look for one now

@John_colasante Жыл бұрын

@@barbatosrex9473 Spraygunner has it. It's called PS-276 Side feed.

@MrKmoconne Жыл бұрын

I need a source for a product from Japan call Mori-Mori (for authentic creator) it's a polyester putty that some bureaucrat thinks is dangerous to ship over seas, even though it is sold in a sealed tube. This is the most handy putty available to modelers who like to build resin garage kits. Please let us know a way around the idiots who think this is dangerous.

@johnathan133 Жыл бұрын

Sunwardhobbies in canada has tamiya polyester putty. Its basically the same stuff. Their shipping is pretty good.

@bmw128racer Жыл бұрын

Those Excel clamps are mediocre at best. Cheaply made and they have a lot of flashing, requiring a knife to remove it all.

@kevinm3751 Жыл бұрын

For your glue applicator just get some sewing needles and nip off the tip where the eye is and presto, you have the same thing and just need a wood dowel and you save yourself $9!