No video

Testing and Pump Timing, Delphi DP210 and DP310 Injection Pumps

  Рет қаралды 17,736

Oregon Fuel Injection Inc

Oregon Fuel Injection Inc

3 жыл бұрын

Testing and timing the Delphi DP210 and DP310 injection pumps requires Delphi Hartridge test equipment. At Oregon Fuel Injection, we use the Hartridge AVMPC-2 test stand.
Delphi DP210 and DP310 injection pumps are original equipment on select engines from Caterpillar, Perkins, Cummins, JCB, Iveco, Fiat, Case New Holland, Deutz and Lister Petter. We are factory authorized to repair, rebuild and test and set lock timing on DP210 & DP310 injection pumps.
If you need the timing set or repairs performed on your injection pump, contact us and let us help you get back to work.
oregonfuelinje...
/ ​

Пікірлер: 21
@irlanmartinstavares3112
@irlanmartinstavares3112 Жыл бұрын
Cogratulations to the staff of The Oregon Fuel Injection. I am from Brazil and I learned to work with this pump, is very, very interesting. I am a mechanic of Injection pump too, and your workshop is bealtifull, very good. God Jehovah bless your work.
@oregonfuelinjection
@oregonfuelinjection Жыл бұрын
thank you
@6romansoldier
@6romansoldier 3 ай бұрын
I thought i was going insane till i saw this video
@sematecnilaboratoriodiesel6110
@sematecnilaboratoriodiesel6110 3 жыл бұрын
good presentation
@oregonfuelinjection
@oregonfuelinjection 3 жыл бұрын
Thank you
@CEROCOOL77
@CEROCOOL77 3 жыл бұрын
@@oregonfuelinjection Donde puedo comprar las herramientas para comprobar estás bombas.....de antemano muchas gracias
@oregonfuelinjection
@oregonfuelinjection 3 жыл бұрын
@@CEROCOOL77 You must be an authorized Delphi Diesel Service Dealer, and have the proper Hartridge pump test stand to set timing on DP210 - DP310 pumps. Contact Delphi Diesel in your country.
@6romansoldier
@6romansoldier 3 ай бұрын
Who would buy this, ive got one of these army forkilifts with this pump in it over here in korea. Got a new pump in and had my joes install it only to later realize the last unit had screwed up the engine timing so we had to tear it down and reset the engine timing. Have zero way to time the pump now.
@hazypaws5747
@hazypaws5747 2 жыл бұрын
What is the function of the latching valve and torque trimmer?
@oregonfuelinjection
@oregonfuelinjection 2 жыл бұрын
The latching valve locks out the advance and controls the torque trimmer during starting for the correct fueling. The torque trimmer is used to control starting fuel, midrange fuel control and the fuel delivery curve. Thanks, Mark
@manzenoge4920
@manzenoge4920 3 жыл бұрын
I really need to see the injector pump tming
@selfdestructpullingteam9261
@selfdestructpullingteam9261 6 ай бұрын
Is it possible to increase the fuel for more power on a dp210?
@oregonfuelinjection
@oregonfuelinjection 6 ай бұрын
The pump is limited on how much you can set them up. We normally set to top of specification. If you know of a different pump part number for the same engine combination, installing a different pump may be a way to get more power. However, we do not have a listing of performance increases and there is not an easy way to figure it out for a single job. Mark
@Geovanny-vl7qd
@Geovanny-vl7qd Ай бұрын
What is the funnction trimmer, light load advance, valve cut-out speed? Can you explain me please Thanks
@oregonfuelinjection
@oregonfuelinjection Ай бұрын
The function trimmer controls the timing advance. Light load advance is just that, it controls the timing advance at light load. The latch valve cut-out has to do with starting fuel delivery control. Mark
@Geovanny-vl7qd
@Geovanny-vl7qd Ай бұрын
@@oregonfuelinjection thanks One questions? Do you have course of this type the pump? Do you have number whatsapp?
@oregonfuelinjection
@oregonfuelinjection Ай бұрын
@@Geovanny-vl7qd Delphi factory training is only available to Delphi Authorized Service Dealers, with the proper equipment. We do not offer any training for this pump, we do not have a watsapp? account.
@Geovanny-vl7qd
@Geovanny-vl7qd Ай бұрын
@@oregonfuelinjection ok thanks
@Geovanny-vl7qd
@Geovanny-vl7qd Ай бұрын
@@oregonfuelinjection hello Friend can you help me with a priblem the pump dpa? The dosificación valve is lock Sometimes accelerate another no I put valve and throttle rod new and it is same What can i do ?
@navnathtormal9758
@navnathtormal9758 3 жыл бұрын
सर जरा हींदीतून व्हीडीओ बना के भेजो टायमिंग लॉक चा
@irlanmartinstavares3112
@irlanmartinstavares3112 Жыл бұрын
My friend greetings, I for example am Braziliam and is very dificult to find a person who speak or can to read and understand your alfabet. Ask a friend to translat it for you, or instal an translator app in your mobile device. Jehovah the almighty God bless your life and work.
Dieselmeken shows Delphi DP200 assembly & testing
7:36
dieselmeken
Рет қаралды 77 М.
Be the Fuel.wmv
11:28
instructordave111
Рет қаралды 399 М.
Это реально работает?!
00:33
БРУНО
Рет қаралды 4,3 МЛН
Challenge matching picture with Alfredo Larin family! 😁
00:21
BigSchool
Рет қаралды 24 МЛН
Идеально повторил? Хотите вторую часть?
00:13
⚡️КАН АНДРЕЙ⚡️
Рет қаралды 17 МЛН
If Barbie came to life! 💝
00:37
Meow-some! Reacts
Рет қаралды 55 МЛН
Delphi 3 cylinder fuel pump repair
8:39
madina DIESEL LAb
Рет қаралды 24 М.
OM606 Pump Calibration plus un-expected MISSFIRE!!!
9:44
DieselPumpUK
Рет қаралды 28 М.
Bosch VP44 Injection Pump Cummins Application Disassembly and Reassembly
6:45
Oregon Fuel Injection Inc
Рет қаралды 30 М.
Montagem Interna da Bomba Injetora DP 210
10:04
Bodipasa Bombas Diesel
Рет қаралды 10 М.
perkins injection pump timing
8:29
the mountaineer mechanic TV
Рет қаралды 131 М.
OM606 Billet Fuel Pump
25:18
DieselPumpUK
Рет қаралды 79 М.
Dieselmeken Shows dismantling of Delphi DP200 pump
11:05
dieselmeken
Рет қаралды 119 М.
How They Mechanics DESTROYED DIESEL PUMP with old school techniques
23:14
Это реально работает?!
00:33
БРУНО
Рет қаралды 4,3 МЛН