I love that you honored your father with how you built it. Always been a class act, much love from the bay area!!

I love the connection you share with your dad, I’m the same way. My dad is my hero, forever.

That bravo has a great holeshot...... they handle well also.

I’m running a Bravo 1 FS 24.5 on my Pro XS really like how efficient it is getting up and down! Saves time and Gas Money! Good luck this year Hammer!

I agree with your perspective on the 4 blade props....I run a Fury 4 Blade 25 Pitch on a Ranger Z520.....I really like your boat! Thanks for the making the Video..

Thanks for sharing you knowledge

Thanks man good info

Been having problems getting on plane with my 18ft with 150 merc couldn’t figure out why turns out the previous owner was running a 24p 4 blade fury prop same as you 😂😂 this helps a lot for me (16) to learn ab props

Monster Flake paint!!! Love it!!!

That's awesome brother

Boi that thing got tf up outaa theree. Hole shot niice

That first prop and your new boat seem to work great, even from just watching the video.

Love the boat

bravo based props are amazing on bass boats! my basscat with a fury tried to slip on roll over, dropping the motor a 1/2 inch fixed it. need to run the fury a little deeper than the bravo props

What battery set up did you go with on the 20 Predator? Once broke in, can you give us an update on top end of both props?

I agree totally with the 4 blade! Ran a fury 4 blade on my Ranger. Not sure I even lost that much on top end? As you would know, Rangers take a little to get on plane, not with a fury 4 blade. Straight up, then down on plane! Also much steadier on waves like Erie!

Any reason you chose the motorguide over the ghost for the trolling motor?

Love the boat great colors fast to keep your life jacket on😂

B lat wht up man sc stand up proud of u man

Have you tried the Tempest 3 blade 25Pitch? My 21’ Skeeter FXR 21 with 250 sho does not blow out and it sticks well. From what I hear the 25P Tempest performs better on the Sho than the Yamaha props?

Great breakdown on how and why, Brian, I saw a guy running a "Sharrow" prop on a bassboat recently with a Merc 300, I am not sure if theyre widely available but that thing lept out of the water from a dig like no boat Ive ever seen before, and turned on a dime out on the lake.Tight lines!

You alright with that box man

Was the second sluggish on the holeshot bc of the gap between the lower unit and the prop. Unless these new motor not supposed to be close to flush.

Hey cuz do you think that boat will work at Clarks Hill LOL imma keep bugging you till you come back down here God bless be safe keep fishing

You got anymore vibes beanies

Hey bud are you running a Jack Plate on your motor ?

You need an external mic on your camera will help out a lot for sound. At least while your doing 60mph on a boat lol

Cuz was finna Say “More Better” 😂😂 cmon cuz let em know where you from!!!

There are aren't many videos of the tour pro every since the recall. Could you give an honest review of that trolling motor. I am a recently purchased that trolling motor and would like to know how it's holding up so far from a pro user.

If (grip) or slip is something your after. Jackplate needs to stay in one spot for the tests. I've seen props slip like crazy, drop the motor 1/2" and they hook up like no other. Also a prop slip calculator is a good reference, its a theoretical calculator but it doesnt hurt to know to work on slip. Good luck this year!

What level do you keep your hydraulic jack plate at in order when your slowing down quick the water doesn't backwash into the back deck of the carpet?

My home lake 👍

I remember the video you made about building this boat, I didn’t expect that much flake in the ash. If you go with that color scheme again next year would you be willing to do less flake??? I think the matte color scheme like that would be dope with a little flake in it but not a lot,,

Would you choose the same for a F205?

The price is completely unreasonable and out of this world absurd, but a Toroidal Propeller (Sharrow prop) would blow all of our traditional props out of the water. Hopefully the prices come down to a reasonable amount, but they are crazy efficient in pretty much every way. But it's literally 10x the cost of a traditional prop. I'm sure if you have a machinist you know and work with they can cut you one for not too much more than the cost of a traditional prop.

Didn’t recognize you at first! Baby face!

first 2 hours the most important For the First Two Hours of Operation: Start the engine and allow it to reach operating temperature. Get the boat on plane, and operate the engine at up to 4500 RPM's (Important: Vary engine RPM's every 2-5 minutes). Run the engine to FULL THROTTLE for 60 seconds once every 10 minutes (approximately). Additional Recommendation: Though not listed in Owner's Manuals, it is an excellent idea to have the engine make at least two (2) complete HEAT CYCLES during the first 2 hours of operation. A heat cycle consists of: Ambient temp, start engine, come to operating temp, run engine for at least 5 minutes on plane, return to idle, stabilize engine temp, shutdown engine and allow to cool to ambient temp. Note: Heat cycles CAN be done on different days. For the Next 8 Hours of Operation: Full throttle may continue to be used, but engine RPM's should be varied/changed at least once every 5 minutes.

Give BBlades a call if you're still dialing in your prop setup.

What horsepower mercury do you have on that boat?

Who is that young man who took over your channel 🤣

Better to buy the most dependable one.

Say Okeechobee😁

My prop is a pair of Brooks Adrenaline GTS 22 running shoes, holeshot from car to pond and back is excellent, no slippage. Top end is pitiful, totally the shoes fault not my body.

23 fury blowing out too much out of the hole- drop the jack plate all the way under the boat.

That predator is “killer”….. get it killer!!! 😀😀Dad joke!

Bruh!!! Life vest under your coat? C'mon man🤦🏾‍♂️🤦🏾‍♂️🤦🏾‍♂️🤦🏾‍♂️

That's best looking boat u own so far!!