Please martin show us this radio set up

​@@Krash_fpv It is just a bit different for each transmitter type, so I recommend searching for "crow braking" or "butterfly braking" on youtube or the internet in general you should be able to find the steps required. For this to work you will need each aileron to have a dedicated channel. And if you want the flaps to support the ailerons when flaps are deployed you also need two channels for either flap. This means : - Thro, Ele, Rud, Flap, Ail1, Ail2 (for the "crow" mod) - Thro, Ele, Rud, Flap1, Flap2, Ail1, Ail2 (if you want all options) In short, your goal is to give the ailerons and flaps a positive or negative (depends on the model and if the ailerons are positive the flaps need a negative offset and vice versa) offset when you activate the crow braking. The direction can be tested and adjusted during configuration. For flaperon control besides the ailerons when flaps are activated you wil need to set up 2 mixers that are set to activate with the flap switch and use the aileron on the same side of the plane as mixer input.

Nice!!

Maybe one day! Thanks bro!

Yeah, really hated the wheels… !!

@@MartinPickering-PickeringRC Maybe try using those massive bubble wheels from the multiplex funcub and the landing gears from one of the Timber planes?? Wonderful job on the build and flight as always BTW What size lipos are you using 4s? I believe I seen a video on here from OMPHobby from overseas in which they used a 6s on it boy the power it had in that video was unreal dough not sure what size 6s they ran??

@@3DMOFO2020 I fly this on 3S 2200 and it has unlimited vertical!

Lol thanks

Thanks!

@Chris_love It is just a bit different for each transmitter type, so I recommend searching for "crow braking" or "butterfly braking" on youtube or the internet in general you should be able to find the steps required. For this to work you will need each aileron to have a dedicated channel. And if you want the flaps to support the ailerons when flaps are deployed you also need two channels for either flap. This means : - Thro, Ele, Rud, Flap, Ail1, Ail2 (for the "crow" mod) - Thro, Ele, Rud, Flap1, Flap2, Ail1, Ail2 (if you want all options) In short, your goal is to give the ailerons and flaps a positive or negative (depends on the model and if the ailerons are positive the flaps need a negative offset and vice versa) offset when you activate the crow braking. The direction can be tested and adjusted during configuration. For flaperon control besides the ailerons when flaps are activated you wil need to set up 2 mixers that are set to activate with the flap switch and use the aileron on the same side of the plane as mixer input.

Lol absolutely, can have great fun with anything with wings!

Thats exactly what I said in the video 🤣

What makes it a “her”? How stupid.

@@Tina-bo8ji All my planes are a “Her”. My planes are a thing of beauty and I associate beauty with females, hence “Her”. Have a great week.

OMP Hobby Bighorn

Thanks! Yeah, it flys great, would be a good early model for anyone, its just fun to do more stuff with as well!

Honestly, no idea. It comes pre-mounted and seemed fine from the start

Lol

3S 2200mAh

Are you kidding me? Why would he do that? I'm guessing none unless he likes to struggle to fly it.

@@michaelkrailo5725 look under the tailplane, white/silver weights !

@@bandyladd5138 What time in the video are you looking at? I see no such weights.

@@michaelkrailo5725 5:40 starboard side below the servo

@@bandyladd5138 Thanks for pointing that out in the video. He is using weights in the back. The real question is how far back from the leading edge of the wing is his CG. I have my battery back pretty far now and like the way it fly's but I could not get it to hover. So maybe moving the CG back even more will improve the ability to hover better. I don't want to add weight to the tail and loose any of the good flying characteristics that it has now though.

I am sure there are some, but we can still try lol. Usa, hopefully will be back over next year for Joe Nall, fingers crossed!

So you wanted ten minutes of stol? One after another after another..?

What did you see?

No worries, KZfaq still counts the interactions 😜

Servo mass in a wing on this style of aircraft is far from important, on a performance aerobatic model sure… but here, correct CG is sufficient…