Testing the Opt Lasers 45W PLH3d-X8's Cutting Abilities - Revisited
Рет қаралды 344
Күн бұрынThis is a revised video followup on the original video from a few weeks ago. This laser is the production version, and I used an optimized focal depth for cutting. In this video I test the XT8 blue laser's ability to cut various organic materials.
This laser can be found on Opt Lasers' website at: optlasers.com/plh3d-series-la...
A video on how to find the optimum focal depth for cutting can be found here: • How to get the best fo...
@alexchopek1385 21 күн бұрын
Have u tried any stainless steel yet I’m gonna try to engrave some knives with my xt8 once my laser spray comes in
@JNWoodworks 21 күн бұрын
I haven't done any marking yet. I have tried a few power gradients trying to get multiple colors, but that is difficult with a blue laser to get consistent results. At the higher power levels, it will make a very black patch on stainless, so I know it iwill mark text nicely. One thing Opt told me was with this much power you should angle the laser a few degrees so the reflections don't hurt the laser.
@alexchopek1385 21 күн бұрын
@@JNWoodworks with the xt8 I think I might be able to produce different colours if I can accurately control the temp of the steel
@JNWoodworks 21 күн бұрын
@@alexchopek1385 Correct. Its just tricky to get the power and speed just right, and the pattern of the fill. Also, I started with thinner peices of SS sheets and warped them badly.
JN Woodworks
Рет қаралды 2,2 М.
JN Woodworks
Рет қаралды 429
JN Woodworks
Рет қаралды 2 М.
JN Woodworks
Рет қаралды 897
Opt Lasers
Рет қаралды 23 М.
Amazing Children Toys
Рет қаралды 11 МЛН
Vu Ngoc Son
Рет қаралды 16 МЛН