Testing With a New FAST Racing Series Build. 1966 Chevelle 396! 1967 L88 Corvette Goes 9.21 147 MPH

No video

Testing With a New FAST Racing Series Build. 1966 Chevelle 396! 1967 L88 Corvette Goes 9.21 147 MPH

Рет қаралды 81,202

Күн бұрын

We went out to test a new car that we built for a customer. Went 9s right off the trailer but we had issues and had to call it for the day due to some issues. Our day didn't end there! The 67 L88 went 9.21 147 the fastest pass ever! Also went a 1.39 60ft!
www.HPDepot.com
Instagram: horsepowerdepot
Facebook: Horsepower Depot
Tic ToK: horsepowerdepot

Пікірлер: 99

@richardpenner4686 10 ай бұрын

Love 66 chevelles..

@jackgtx440 10 ай бұрын

Wonderful job on the Corvette. I love watching you guys. Makes me miss this racing. -Jack Irons Jr.

@junk496 10 ай бұрын

It's amazing how you get these cars fast without big intakes/carburetors and running exhaust manifolds. 👍

@HorsepowerDepot 10 ай бұрын

Lots of homework, testing, and dedication to get here!

@junk496 10 ай бұрын

@@HorsepowerDepot oh I believe it. Great work. 👍

@dansherwood9851 10 ай бұрын

Oh cmon, u can tell us…where’d you hide that 150 shot?😅

@PCgonerogue820 10 ай бұрын

Nice look Chevelle, Thank You for Sharing Jordan 9.10 is getting closer

@HorsepowerDepot 10 ай бұрын

It’s close. It should go 9 teens this year for sure!

@ronnieboucherthecrystalcraftsm 10 ай бұрын

under 10 seconds is fantastic for a street driven car = chevelle is a big car = 396 doing a great job ! super top quality = i bet your father is the MAGICIAN OF SPEED !

@carado1984 10 ай бұрын

Its not a 396

@theinsaneshecklador6598 10 ай бұрын

@@carado1984 In another comment Jordan mentions it's a 560.

@HorsepowerDepot 10 ай бұрын

The chevelle is a real 396 car. Current engine is a touch bigger.

@jimthomas1989 9 ай бұрын

@@HorsepowerDepot , I have a real 138 Chevelle 1966 Super Sport , built small block 327 /600hp and does 11.5 in the quarter mile , Engine screams to the moon !

@doublecheeseburger1712 8 ай бұрын

What size turbos you running@@jimthomas1989

@modernpatriot8342 10 ай бұрын

Utterly mind-blowing performance! Talk about wolves in sheep's clothing. Both cars look like 13-14 second street cars. I love this channel! Thank you SO MUCH for putting out these terrific videos!

@royrauch9775 10 ай бұрын

Your '67 Corvette is simply OUTSTANDING! FRIEND HAD ONE BUT WITHOUT YOUR KNOWLEDGE OF MOTOR, SUSPENSION ,and tire expertise, he was only able to get his tri-power car to go in the mid to high 11's and that was with real slicks! Simply amazes me your talent! Tell you what I would LOVE to see is you set up with your STREET tires race a new Tesla Plaid! From what I have seen. They usually run 9.3 at about 150 in the quarter and it would probably come down to a driver's race. Seeing who cut the better light. Best time for a Plaid in 60' has been a 1.43 so your 1.39 is exceptional! Like to know how many others would enjoy a best 2 out of 3 race!

@keithk2926 8 ай бұрын

No need to extend the bowl vents run a 5/16 hose vent to vent with a hole cut in the top of your hose ,beautiful cars nice job on both 👍

@josephkwapich6113 10 ай бұрын

I always look forward to your videos. It sucks that I live on the west coast and haven’t had the opportunity to see you guys in action. I’ve also been a big fan of HemiJoel since he raced his green GTX. He is one reason why I bought a Hemi car.

@L72Chevelle427 10 ай бұрын

Beautiful Chevelle - my favorite year. Nice color combo with the black vinyl top.

@HorsepowerDepot 10 ай бұрын

It’s a very nice, all original body panel car!

@curtfreeman8632 10 ай бұрын

Always stoked to see a new HPD video pop up on my phone. I was mashing the accelerator through the floor with you to try and get a 9.19, lol! Heard the bog and knew it probably wouldn’t happen. But hey, still an unbelievable pass. I’m proud for ya on how well the 67 has done so far. Will be a lot of fun seeing the continued progress. Love your channel!

@AG-ci7rl 10 ай бұрын

Another great video - love them. One thing i noticed, following all your videos, is that the car that trapped the highest miles per hour was the red '69 L88 with the borrowed engine. I believe it went over 148, and only a few 100ths off the fastest ET of the '67. The setup in the '69 was unreal and ran extremely well, but it seemed almost as if the car was an afterthought. Keep up the great content!!

@HorsepowerDepot 10 ай бұрын

The engine in this 67 is the same exact engine that we installed into the red car that weekend, but makes more power now. The hood really hurts the 67. 69 l88 is a 4 inch cowl hood, the 67 is 1 1/2. Thats why this car wont mph to the 1/4 mile. The 67 is 2 mph faster to the 1/8 mile though. It works well for the first 660 ft.

@user-qi9bn2ns2l 10 ай бұрын

Absolutely awsome! Takin my car out sat 1st time in 2 years👍

@HorsepowerDepot 10 ай бұрын

Good luck! Hope it goes well!

@SaneCayne 10 ай бұрын

May I have a tissue? Comin' right up!

@jamiedarnell9364 10 ай бұрын

Another awesome video. Can't wait to see how fast the Chevelle gets.

@pb5778 10 ай бұрын

Thanks for sharing its flying

@drew7767 10 ай бұрын

wow even putting chevelle’s in the 9’s! you guys have it figured out. i would love to run 9’s in my 67’ chevelle ss.

@HorsepowerDepot 10 ай бұрын

We’re trying to put it deep into the 9s!

@rickchambers73 10 ай бұрын

I love this class amazing how you can make these cars Bogie. God bless

@jamesstead1496 10 ай бұрын

Looking good and glad to see you're happy with the' 'vette. That Chevelle is going to win some races !!

@CableGuy74 10 ай бұрын

That's awesome!!! Greg does have a platform... It was fast before he sent it up to you, but, with your magic wand..... can't wait to see

@derrickgeltmaker6127 10 ай бұрын

Another awesome Video ! It really nakes my day better when I see a new video is up..

@user-xo3om9dx6w 10 ай бұрын

If you tighten the lock In the standing column by taking the wheel off turning the tightening screw in a quarter turn and then putting it back together the wheel will lock properly

@HorsepowerDepot 10 ай бұрын

I will look into that! Thank you!!

@theinsaneshecklador6598 10 ай бұрын

I remember some of the Mopar guys complaining about your dad not running an air cleaner. Maybe it's different on the 69 vs 67 but it's pretty funny that it's actually slower without it. 11:58 lol you actually mention it.

@HorsepowerDepot 10 ай бұрын

Same exact air cleaner and filter setup on the 69! Its been brought up a couple times. Funny how its actually now documented that they are slower without them. The 69 ZL1 hated no air filter or even no air cleaner lid! Did a lot of dyno testing with that car.

@princeomar140 10 ай бұрын

I’m sure you probably already have jet extensions in the secondaries. I think since your car 60 foots pretty hard that taller vents may not be enough to prevent fuel from coming out of the vent. They sell a whistle to prevent fuel from coming out of the vent but it’s not 100% effective in racing. You can install a hose that connects the two vents together and put a couple holes in at the top so it can vent. They also sell a one piece vent that connects the two bowls together as well.

@HorsepowerDepot 10 ай бұрын

It’s got jet extensions in it. The current vents aren’t tall enough to put a hose on or I would have tried that. Lowering the float level helped a bit. I think others in the class would complain about the non factory “look” if I put the one piece vent in, but that’s the one I’d like to run.

@toddgreim9254 10 ай бұрын

Love all your videos, thanks for sharing. Got my eye on a 69' chevelle for a FAST series car, and hope to meet you guys one day.

@user-tu8kz3lc1m 7 ай бұрын

These guys know their stuff❤❤❤❤❤

@sporty196071 10 ай бұрын

66 SS has Been my favorite for years

@derrickgeltmaker6127 10 ай бұрын

I would love too see y'all do a 1970 454 L-S6 Chevelle build a race it !!!

@p1315 10 ай бұрын

Damn!

@1diggitech 10 ай бұрын

Right, double damn!

@richardsmith-qy6vl 10 ай бұрын

Yalls cars are so impressive I just put my 60 over 427 in my 88 monte carlo SS yesterday the motor makes pretty good power for what it is its got a small howards hydraulic roller it's 235x241@50 with 628 lift on a 108 lsa it's right at 11 to 1 compression and has afr 265 roval port heads I don't know what it's going to run but once I get a 9 inch rearend in it I'll find out it's got a stock 10 bolt posi with 373 gears but I'll be going to 430s or 456 gears great video

@Justme-zt7gk 8 ай бұрын

Fricken awesome!!!!

@neilgoldstrom6312 10 ай бұрын

Hey I absolutely love your channel!!!! You're old school drag racers...I have a question....I was always taught to never let the motor pull the car down when you pass the finish line ...but you let the motor pull the car down....your feelings on this????

@HorsepowerDepot 10 ай бұрын

You need to hit neutral to be able to shut the engine down, using factory shifters and reverse pattern valve bodies we can't go right to neutral to shut the car down. Its never really been an issue with our engines.

@neilgoldstrom6312 10 ай бұрын

@@HorsepowerDepot ahhhh i didn't know that ...thank you for educating me!

@user-wq7yk9fj8p Ай бұрын

i can tell you how to fix that telescopeing column,awesome what you all have been doing!!!

@TimAtkinson-qs6sv 2 ай бұрын

That Vette is a bad machine. Amazing just having an air filter changes et.!!!

@vancejohn4834 10 ай бұрын

Try extending the fuel bowl vents outside the hood. You might be pulling so much air that fuel is being sucked out of the fuel bowls. that way you get true atmospheric pressure in the carb. which is 14.3 at sea level. or put fuel injection on it.

@Ls6racer 10 ай бұрын

pretty damn cool !

@twine3410 10 ай бұрын

Holy Moly! What was the DA on that pass? You got it goin' on!!

@zone47 10 ай бұрын

With some fine tuning, I'm thinking 8s for the 67! It sounds like 3rd gear in that Chevelle is pretty tall ... compared to the Corvette. 1st to 2nd sounds good but 2nd to 3rd is a bit of a gap. Still getting into the 9s first time out isn't too shabby.

@HorsepowerDepot 10 ай бұрын

Yeah we have some work to do to the chevelle before next time out.

@1diggitech 10 ай бұрын

@@HorsepowerDepotBrother bad a*s 💪🏿💪🏿.My friend couldn't believe it especially with cast iron manifolds.

@MAPRTX 10 ай бұрын

LOVE IT

@howabouthetruth2157 10 ай бұрын

Wow Jordan!!!! That Vette is freakin' flying!!! How many cu in is that L88??? And how many cu in is the 396 in that Chevelle???

@HorsepowerDepot 10 ай бұрын

They’re both 560 cubic inch.

@howabouthetruth2157 10 ай бұрын

That's it. For some reason, I couldn't remember. Thanks Jordan, and keep makin' that '67 quicker & quicker. @@HorsepowerDepot

@charlescooper8235 Ай бұрын

I the FAST rules, can you put a hose on the carb vent tubes to prevent gas from dumping? Thanks

@joethompson-tv1ss 10 ай бұрын

I was happy to find your post today. I bet that chevelle is not a 396! Tell us more about it. Sorry the good weather is about over for you guys. Tell us what your Winter projects are.

@HorsepowerDepot 10 ай бұрын

It’s not my car so I won’t say too many details. But it’s 560 cubic inch.

@BernardBouchard-qq9kq 3 ай бұрын

Make sure you upgrade driveshaft on chevelle

@patrickmoore1017 10 ай бұрын

Vent baffles will fix the fuel running up the vent if you don't already have them.

@HorsepowerDepot 10 ай бұрын

It’s got them and for some reason still does it.

@rcfred_689 6 күн бұрын

Wow what is the displacement of the engine in the Chevelle?

@philhazeldine8618 10 ай бұрын

hey is that an electric vacuum pump you switch on just as your staging, love the channel here in nz

@ILYMAD66 9 ай бұрын

Love it! Do you know what the wheel size is that are on the Chevelle?

@johnboy9769 10 ай бұрын

I'm probably wrong but kinda sounded like the Chevelle was blowing through the trans or converter at the top of second gear.

@HorsepowerDepot 10 ай бұрын

Yes it does sound that way, It's got a couple issues we need to address before next time out.

@drewcrabtree9607 10 ай бұрын

Put you a sneaky Pete nitrous kit and you can get it in the 8's!

@HorsepowerDepot 10 ай бұрын

No no no. We’re going 8s NA! If we used nitrous this thing better be going 7s!

@dansherwood9851 10 ай бұрын

Yes!

@douglasgeiger7591 10 ай бұрын

Excellent!! One criticism... Couldn't you have emptied the tissue dispenser to save a little weight?? Would the rules allow you to move the tissue dispenser to the trunk!?

@HorsepowerDepot 10 ай бұрын

The owner of the car says the tissue dispenser stays to hand out tissues to all the cry babies! And it slings back on launch for better weight distribution!

@douglasgeiger7591 10 ай бұрын

@@HorsepowerDepot 😂🤣😂🤣 thank you

@dansherwood9851 10 ай бұрын

All the ford whiners….hahaha

@johnsheetz6639 10 ай бұрын

I would love to see one of these make a hellcat cry

@HorsepowerDepot 10 ай бұрын

It’s happened! Lol!

@johnsheetz6639 10 ай бұрын

@@HorsepowerDepot YESSS,!THAT'S WHAT I'M TALKIN 'BOUT!

@babaoreally8220 8 ай бұрын

An L-88 is an aluminum headed 427 cu. In. engine.

@HorsepowerDepot 8 ай бұрын

It is an aluminum headed. GM painted the heads in 67.

@babaoreally8220 8 ай бұрын

@@HorsepowerDepot I owned a new 64 GTO and spent many a weekend at the old US30 drag strip.Nicki and Baldwin Motion thrashed these engines to 10.7-10.8@130s in the day.Just figured this engine had something else going on.Beautiful car and clean setup,nonetheless.Car club friends had 66 split window and the other an L-72 427.Those were the days of endless street racing.