Learn more at DependableOxyge... How to test you’re Oxygen level for a Portable Oxygen Concentrator using an Oximeter. Some Oximeters are available without a prescription
Пікірлер: 12
@chrisscott15474 жыл бұрын
$40+ for the finger tester? They're going for 10-15 on ebay. I bought one and it works well.
@DependableOxygenCompany4 жыл бұрын
you get what you pay for. Quality is not all the same. Good luck with the cheap $10.00 one when your life depends on it.
@richardbenson40482 жыл бұрын
I don't get these comments. I have severe COPD. If my concentrator is working I get relief right away. If the flow or the content is not as it should be I get no relief. The finger tester can provide another proof one way or the other if working properly. Each usage I put on the finger tester and start up my concentrator. If I feel relieved and the finger tester says 60 and 90 or above I know the concentrator is good. If the finger tester is lower I know it's time to get a new one. If I don't feel better it's time to use the backup concentrator and get the concentrator analyzed. All I'm saying with this is, your body and heart will tell you better than any mechanism what's not working properly.
@allenrose1547 жыл бұрын
This is a useful test for the patient; however it is not a direct test that the concentrator is working.
@AffordBindEquipment5 жыл бұрын
if your oxy is down, then the device isn't working. Not a direct test be effective anyway. "is my car working?" "can you drive it? If you can't drive it, your car isn't working."
@metallampman4 жыл бұрын
How do you test the oxygen concentrator directly ? Its ridiculous to breath from the machine and see if the oxygen supply is working by a monitor
@DependableOxygenCompany4 жыл бұрын
Arch. To directly test the oxygen concentrator requires a oxygen analyzer that cost $500.00. Also you have to know how to get you portable concentrator into a demo mode so it pulses continuously so you can analyze the flow. So consumers don’t ever do this. Dealers like me should perform checks. That’s why I made this video for consumers. Because if the oxygen level in the patient is above 90 or above you’re normal “baseline”. Then you know you’re machine is working. Also you have to make sure the machine you use makes enough oxygen to keep you’re oxygen levels above 90 percent. That’s why I recommend you get tested before using a pulsing POC. Thanks
@livinglifemyway73495 жыл бұрын
How do I get into the diagnostic settings of a simply go, as in there it will show 02 purity thanks
@DependableOxygenCompany5 жыл бұрын
Press the power button once and when the Respironics logo appears press the down arrow.
@mikemorningstar11307 жыл бұрын
i need to test the concentrater
@DependableOxygenCompany7 жыл бұрын
mike MORNINGSTAR any dealer can check it out. Some POC have an on board testing and alarms. You have to test it with a device, call you're provider. I will say if you're oxygen level is above 90 on the device it's probably working.