You just cost me a $20 in the swear jar, but saved me my sanity. Worth it.

Worked in 5 minutes with a 30", 1/2 drive breaker bar. They were tight but they came right out. Thanks so much!

Well done! I had done this before, forgot about method, was searching web for a flywheel lock and found your video 👍. We older folk, need a reminder 👍

Good idea, good video, straight to the point. Thank you

I freaking love you !! lol this was so easy and it held like a champ never fell off or damaged anything . it just stayed how you showed how to set it up and reversed the direct to put the flywheel back on and torque it. Seriously don't know what I would have done without this video. Can't speak highly enough about how great this trick was. Seriously life saver ! Thank you !!!

Awesome idea, I normally use a punch and stick it in the clutch bolt hole to catch the back of the block.

Thank you so much! This worked flawlessly for me, and I saved so much not having to get an impact. Very clever workaround.

This video helped me out. Had no trouble getting the bolts out fast with this method and didn't have to use an impact.

Thanks mate! I've struggled with this for 3 cars now. About to do my 4th. You just saved me.

Thanks for that tip, will definitely be using it! Oh and that last part with the "hey" gave me chills!!! 👻😱

just used this trick on my BMW e30. you saved me a lot of grief. thanks!

Woohoo just Google searched for this stuff an bam you got first vid post!!!! Hell yeah Love peace and axle grease brother! Congrats again on the move too

Absolute amazing idea!! Worked so good! Been going at these flywheel bolts for an hour and saw this and got in a few seconds!! Appreciate it

Good idea never woulda thought of anything like this. I don't have an impact so thought I was stuck here. Ill try this tomorrow.

Thanks for posting this; it worked great for me! I had the engine out of the car, with the oil pan sitting on the floor and the top of it supported by my cherry picker. I found the best way to do this was jam the flywheel with the wrench like you showed, grab the valve cover with my right hand, the intake manifold with my left hand, and then use my left foot on the end of the breaker bar to loosen the bolts. It also worked on the crank bolt, just like you said.

Awesome man, soo easy and yet I didn't get to that myself. Thank you!

I was trying to figure out a method to remove my flywheel bolts! Thanks for the tip!

Your the man. How did the 12 point not slip once

You seem like the type of guy to grind out a car in any location under any circumstances lol. Cool video and good tips 👍🏽

Thank you, Sir! I was replacing the clutch & flywheel on my accord typeS , in the driveway on axle stands with basic tools. Nightmare job, removing the subframe, etc. Finally got to this part. Was losing the plot and about to reach for the angle grinder... 😅 Nice one 👍

Thanks for the tip. I tried it and it worked. I also bent the trans bolt but no big deal.

Thank you! I needed this so badly! Good told impact torque wrench couldn’t move my loctite fly wheel Bolts!!!

Sweet, I’m changing my clutch and you can use this method with a double box end wrench to tighten them up also with your torque wrench! I thought I may need to buy a flywheel holder but this will do the trick.

Nice. Thanks man. Also sounds like you have a helper from the other side.

You saved my life. Thank you so much

Thank you!!! You saved me many hours of cussing and frustration

Thanks its worked you help a lot, good job, shout out here from the Philippines

You helped me so much man! Subbed!

Bro!!! I spent 5hrs fighting my engine. I will try this next!

Made my life so muzh easier. Ur the best!!!

This helped me. Thank you.

Thanks for the video friend!

Beautiful! Thank you!

thanks so much dude. your smarts saved me alot of headaches. thanks n Kudos.

This is super smart. Thanks!

it was so easy, thank you so much

Wow this is the best way I’ve seen

Sweet video man that will come in Handy great way to get those off

Brilliant. Thank you!

Simple but ingenious solution!

Nice trick man!!! Thanks for sharing

Pretty slick trick👍

Thanks, it worked perfectly

Thank you! This worked awesome

Very helpful!!! Thank you so much!!🤙🤙🤙🤙😁😁😁😁🙏🙏🙏

Worked for me thank you I was very upset

🏎🏎

so easy and smart thanks

Good tips bross

Thank you so much!

I appreciate you man

Shot bro🤜 omfl I've been struggling

Need to buy a better battery powered impact. I got one close to $300 from harbor freight, well worth it, paid for itself numerous times. First test to see if I would of kept it was at junkyard and busted loose 5 honda accord crank pulley bolts, so kept it. Had it for now about 2-3 years no issues, I just used it today to break axles,calipers, crank pulley bolt, mount, and all transmission housing bolts.

2000 Civic Flywheel, you failed to say the socket (1:25) sizes, at 12 point or what? Then the torque?

Great tip.

Thank you so much my savior

Dude thank you you da man!...

Thanks dude 🙏

Thank you so much

this trick works wonders

Just tried this 😂 bent one of my transmission bolts

Thank you so much!!

Thanks homie

Good video

Damn brother man.. awesome trick.. I am in the process of building a little turbo engine and needed flywheel off.Can I torque it back up this same way? It won't hurt the gearbox mounting bolts?

Thank you..

thanks you ..

it was the ghost of your engine coming back to life

What size socket did you use

What socket are you using ?

great vid hopefully ill get these bolts off

Lol

THANK U

Thats great

That's ingenious, but the bell housing on the corvair motor I'm disassembling won't permit it. Was thinking of using some heat. Yay? Or Nay?

What size of bolt did you put in the flywheel hole?

Genius

Sir which side does flywheel move

I goona try this tomorrow m flywheel bots overtorked by impact gun n I've been trying get them off by wrench without success

Thanx Mate😂

I ain’t afraid of no ghosts 😜

So what happens if the flywheel moves? I was trying to remove the bolts and the flywheel moves like 1inch

does this ruin the flywheel?

The problem is getting these screws out with the engine in place.

Earthquake or Milwaukee would break the bolts free. Bauer 1/2" cordless is junk

W

Just get an impact! Borrow one buy one… eff the dum shhhh

🏎🏎