TGK Motorsports Jack Block Install DIY | C7 A6, A7, S6, S7, RS6, RS7

Рет қаралды 3,264

4 ай бұрын

These things are so easy to install and are a game changer for DIY enthusiasts who need to lift their car up often. Thanks again to ‪@tgkmotorsport‬ for sending these to the channel so we could make this video. Check out the DIY and then go order yours here:
tgkmotorsport.com/products/tg...
----------------------------------------------------------------------------------------------------------------------------------------
*NEW* Audi C7 Owners Apparel! Check it out: bit.ly/4croagi
Check out our Amazon Shop!: amzn.to/3hcFE8u
Amazon Wish List for Audi C7 Owners: amzn.to/3FpgxqR
----------------------------------------------------------------------------------------------------------------------------------------
Follow our other Socials!
Facebook: / audic7owners
Instagram: / audic7owners
Disclaimer: Some of these links are affiliate links where I'll earn a small commission if you make a purchase (at no extra cost to you). Shopping through these links is a great way to support the channel so I can keep making helpful videos for you. Thanks!

Пікірлер: 42

@AudiC7Owners 4 ай бұрын

Buy your TGK Jack Blocks here: tgkmotorsport.com/products/tgk-motorsport-billet-jack-blocks **NEW** Audi C7 Owners Apparel! Check it out here: bit.ly/4croagi

@glennr9913 4 ай бұрын

I just purchased a Kwik-Lift for my garage. They're out of production but I found it nearby on FB Marketplace. Solved the lifting issue for all of our vehicles. 👍

@aesca151 13 күн бұрын

@jancarlostrinidad9881 made a comment below that this doesn’t resolve the issue of placing the car on stands after jacking up at the jack points. I agree. In the video the stands are a little further back, but it looks like the area was bending from the pressure. The only area that I could find that is reinforced barely sticks out beyond the covers under the side skirts. Remove those covers and you can see that reinforced area with two plastic plugs. You can jack from there and put your stands at the designated jack points. Powerflex makes good puck-like adapters for the jack points.

@CombsTanner 4 ай бұрын

Preordered a set of his new sway bars for the B8 platform. He makes some good stuff, just need him to snag an S4 so we can also get some more parts.

@cm.5023 3 ай бұрын

Me watching even though my C7 was deemed totaled last week. Awesome to see folks still innovating.

@AudiC7Owners 3 ай бұрын

Bimmer dude! What's next for you?

@cm.5023 3 ай бұрын

@@AudiC7Owners picked up a 21 A6. I'm liking the extra MPGs but some of the nanny features are annoying. I need a new VCDS cable to start hacking since my old cable won't work with the newer models

@TremainSr 4 ай бұрын

I need those thanks again

@AudiC7Owners 4 ай бұрын

They are so nice!

@TremainSr 4 ай бұрын

@@AudiC7Owners Compared to mine being missing 🤣🤣

@TremainSr 4 ай бұрын

@@AudiC7Owners How’s the engine coming along after shipping it out. You have any updates?

@AudiC7Owners 4 ай бұрын

Just pulled my oem engine out of my car, and the heads on my replacement engine are being done now 👌🏼

@jancarlostrinidad9881 4 ай бұрын

A bit too expensive... Doesn't really fix the problem I have with fitting my jack and a jack stand at the same time.

@glennr9913 4 ай бұрын

$250 does seem a bit steep considering what they are.

@AudiC7Owners 4 ай бұрын

These are solid billet and engineered extremely well. It does suck that the car lacks dedicated places for Jack stands.

@BlackCoasterGeek 3 ай бұрын

Way too expensive for what it is

@AudiC7Owners 3 ай бұрын

Let us know when you make one that's cheaper

@BlackCoasterGeek 3 ай бұрын

@@AudiC7Owners definitely will and I’ll send it to you to test it

@hjaniel4428 4 ай бұрын

👍

@mattkraick4846 2 ай бұрын

Bought these mostly because one of my 4 OEM jack blocks was missing when I bought the car. That one went in easy, but....how the %$@& do you get the other OEM ones out? No amount of prying on that grommet thingy is getting it out!

@AudiC7Owners 2 ай бұрын

They all popped off the same for me

@boerieza 4 ай бұрын

This is so flippen cool! I just ran to my SQ5 to see if it has similar jack spots and, NOPE. Seriously? I are disappoint. Great product though!

@AudiC7Owners 4 ай бұрын

Unfortunately these are only for C7 fitment haha.

@EGEIS9 4 ай бұрын

Hey so I ended up picking up a 2014 a6 and I love the car, way more then my s4. However it does have 135k miles. From your video I already plan on replacing the pcv, thermostat, and water pump. With 135k miles do you think it’s smart to tune the car for power and start pushing it? Or is 135k to much. Also how much more miles can I expect to get out of this car? The previous owner was on top of maintenance and it was only 1 owner. Sorry with all the questions just super interested in this platform

@AudiC7Owners 4 ай бұрын

These cars are very reliable, but if you want to verify it's in good shape then get a compression test done.

@EGEIS9 4 ай бұрын

@@AudiC7Owners should I do a compression test when the engines warm?

@AudiC7Owners 4 ай бұрын

Yes

@EGEIS9 3 ай бұрын

@@AudiC7Owners also one more thing I never really had an automatic car before but when I revved the car and let the rpms drop back to idle the tranny makes a rattle noise from 1300 ish rpm to 1000 rpm is that normal for the zf8?

@geriatricginger 4 ай бұрын

4L Q7s are the worst for jack points. These would be nice, if they made them for the 4L chassis.

@talonpilot 4 ай бұрын

I would be a little concerned that the screws would back out due to harshness of driving over rough roads.... and I dont mean off-roading, just driving on todays roads! It didnt seem that there as any room for a small lock washer with them being machined so precisely; I'd probably add a bit of Loctite to give me the piece of mind of not losing a part that pricey. $250 bucks is no joke just to have a jacking point... and you still dont have a place for a jack stand!

@AudiC7Owners 4 ай бұрын

Blue locktite isn't a bad idea, but I think I'll be fine. Time will tell.

@andrewodri5409 4 ай бұрын

I bought some rubber pucks and immediately regretted it... The jack+squishy rubber+shallow plastic does not make any more confident that my 4,000lb S6 won't squash me. Got me wondering anyone out there has just tried cutting down a couple of bits of box steel cut down to length, bolted/welded a couple of them together for height, and maybe notched it slightly for jack stands? I feel like it could be a $300+ saving, and let you use a U-jack so you don't have to cut your carpet for jack points

@jxrdnz 4 ай бұрын

Meanwhile my side skirts are already fucked lmfao so i just keep doing it the old way

@craigauty6756 4 ай бұрын

I sware the b8 s4 only has the pinch welds to jack up from, awful design

@chuck77k 4 ай бұрын

And an original jack? You'll never be able to use it.

@AudiC7Owners 4 ай бұрын

You mean the one that comes in the car? I never use it anyways. Widow makers

@jasonpatterson7266 4 ай бұрын

@@AudiC7Owners Only issue is if you are on the side of the road with a flat tire, all you have is the widow maker.....unless you call a tow truck/AAA.