Many more to do, thanks.

I got a real good deal at Sloan Express. Still was not cheap, lol. Thanks for being here and watching.

👍

I looked at getting the spiked closing wheels but they are expensive. I got these for around $25, so I just did these. I'm only out $150 if I change them and will has spare parts, lol. Thanks for watching and commenting. Let me know how they work out. The plant is not no-till but I'm looking into upgrading with down pressure springs to be able to no-till.

Your welcome.

Yes on adjusting them. I would love to switch to the upgrade with the T handle. Maybe next year.

@@TAHDAHFarm i have some used ones but the shipping alone would be costly. With shoup you used to get free shipping on larger orders.

Over $200 and it is free shipping at Shoup. I've ordered extra stuff for the free shipping if I'm short and need to get it right away. If not it goes on a list and when I get $200 I order what is on the list, lol.

It is a ball joints fork. But I need the small one. I found a 5 piece kit on Amazon that had the size I needed. Thanks for stopping by and enjoying my videos.

Thanks but I'll let you in on a secret, the job I have gives me a lot of time to do the research on what will need to be done, lol.

I have worked on the meters a lot. I covered some in a video about a year ago when I got a new monitor. Search "IH 1086 part 7" about 10 in I talk about it. With it all hooked up and on, you should see a led light down in the meters. It could be red or green is the most common colors. If no light it is not getting power, has a bad ground, or is bad. If you have a light, do like I did in the video and it it detects it then all should be good. If it doesn't then check the censor wire. I replaced the monitor because it was not working right in 4 row when on the grain drill.

Also check out "John Deere 750 Drill Lights and Monitor Sensors"

@@TAHDAHFarm great. I'll check those videos out. Thanks

I've had pretty good experience with this one. Need to have the seed meters checked but haven't had time to do it. Thanks for stopping by.

Brand was KAKO and was listed as Pickle Fork Tool Set, Pickle Fork Ball Joint Separator Set. It had 5 different sizes from 11/16" to 1-5/8". I was tired of the chisel or screwdriver also. It was $48.99 and free shipping with prime.

partscatalog.deere.com/jdrc/sidebyside/equipment/81550/referrer/navigation/pgId/22928 See if this works. If not go to John Deere parts. Under model search for 7000. Then look up your model and clic on it. Scroll down and look for "100 drive" then scroll down to "drive wheel (D09) 100-24" and that should help. Good luck.

Shoup parts or Sloan express parts have replacements.

Me to but it is going to need to warm up, lol. Thanks.

I am not a fan of WD-40 but I was out of Karola oil and couldn't find the can of PB Blaster. So, anyway that is was got used. Looking forward to getting out there.