We'll show you how we fixed a loose tile using a drill and carpenter's water-resistant PVA glue. If you have a loose tile in your home, it's important to fix it as soon as possible to prevent its cracking or shearing. This quick and easy fix can save you time and money in the long run.
To begin, you'll need a few materials: a drill with a shin drill and a carpenter's water-resistant glue (PVA).
Use the drill to create small holes in the seams around the loose ceramic. Be careful not to drill too deep or too close to the edges of the tile to avoid cracking it. We used a big syringe without needle to insert the glue into the holes created.
Press the tile down firmly onto the floor and allow the glue to dry completely. It's important to keep the tile in place while the glue dries, so use a heavy object like a big bottle with water to hold it down. We used baking soda and super glue (cyanoacrylate) to restore the seams around the tile we fixed.
Once the glue has dried, your tile should now be firmly in place and ready for loads!