This channel is underrated. I can't wait for it to get big one day

I love how every livestream a lot of people are not sure if it's live or pre-recorded because the quality is so high :)

37:20 - Theres already something called a demolition screwdriver, most tool makers have them. Generally its a #3 flat head with extra thick shaft, shaft goes through the handle so you can hammer it from behind, they often have a hex collet or square shaft so you can take a wrench to it for extra leverage, and my personal favorite from Milwaukee has a notched tip that makes it easier to pry things wiith. Basically its a screwdriver spesifically designed for all the things youre not supposed to do with a screwdriver and I absolutely love it.

happy to see the channel back, good job, can't wait for the Wan show

From working at a casino, that small display is exactly the one in some slot machines. They even have that dongle on them for the control board.

Wish I could've caught this live but love the streams, keep it up LTT team!

For the canned air, at 1:05:00, you can always recycle the can by(*ONCE IT'S EMPTY*) drilling a hole in the bottom and adding a tire valve stem, seal it up, then refill whichever way you want.

Great video. The part where Linus talks about color and hdr was super interesting, sad he didn't finish because he got distracted by the AIO cooler😂

Big fan of Dan and his quiet nonchalant comments. He's smart, intelligent, dry witted, low key sarcastic and able to internalize then shrug off incoming comments at him. SDR vs HDR comment was a peek at him buying time. Bringing out the replacement RTX4090 3 wide with "It's where I put my feet" was gold gold gold of throw away low key background line that made me laugh for a minute. Enough for me to decided to post a comment. Please has a live build every 3 months. Thanks!

Linus does so well at soloing a stream. Sure Dan and company are there to help but he sure holds it down and keeps important and entertaining info coming.

I miss the quality over quantity your channel used to offer! Your team works so hard as well as You. I know Your a family man but let's get back to the quality in your channel that most viewers truly appreciated!

Love to see you up and running again Yay!! Can’t wait for tonight’s WAN

Thanks for doing this at a time so those of us in EU / UK can enjoy at a reasonable time! Was fun :)

I love how the frame counter is fluctuating so fast on the monitor that the camera just picks up that it's between 500 and 600 fps blurring most of the digits together as they update too fast for the frame-rate of the recording XD

I in lvoe with recent stream videos. Long, informative and action packed. amazing.

I love the videos where Linus is just being Linus with that full on nervous creative energy he has.

for the fixed handle drivers, i would actually like to see them as simple 1/4" hex based, with a really good locking fixed handle. that way we could use them in the ratcheting driver when it's needed or in the fixed handle for simple convenience. plus, if/when the drive head gets damaged, we only need a new shaft rather than a whole new driver.

This is the best thing to listen to while building in the exact same case for my first ever build.

Mount the case on a wall at a downward angle with the screen facing down to use it as a browser scrolling to quick access guides, etc while gaming. you could even have a tiny window open playing a movie while you game with a tiny browser open for guides etc. I can see many use for it, but it require3s custom mounting for the case itself. It could end being a super nice room feature mounted.

Damn that's some crazy quality for a live stream. You can tell you've been doing this for years you just got that just another day making a review video thing down. Defiantly earned everyone of them 15.4m subs keep it up!!

It’s like having a mid-week LAN show lol. Love it.

Does anyone have the "budget version" of this built gathered together that Linus mentioned he would always keep in the conversation?

Instead of having multiple bore sizes for the handles, do something similar to SnapOn and have 1 size bore for just a couple of handle sizes (Small, Medium, Large). Or just 1 bore size for 1 handle size, 1 handle for everything. They have a transitional hex designed between tang and shaft (designed to put a wrench on it) that allows them to turn the shaft down to whatever size they need. Less total parts is better for all.

Great content as usual. But I'm having trouble wrapping my head around the screw drivers lol. I guess for someone who has a drawer to toss 10 screw drivers into, this is ideal. However, as a data center technician, I want to limit the amount of tools I carry to the least possible. Perhaps, respectively, you could work on a modular design similar to Wiha or Klein, where you have a grip that the blades themselves are removable and on the butt end of the handle, it expands and has bits that corresponds to a separate attachable blade that utilizes a magnetic bit holder. Perhaps double sided blades, that way a technician could carry a few blades for narrow applications, and the magnetic bit blade for the bits in the end and offer the handle in different sizes for different hands. I would buy it, if it were durable. The issue with Wiha is that the blades get stuck. The issue with Klein is that the magnetic bit is too wide. This is remedied but using long bits, but it makes zero sense on why not just design double sided bits like Wiha. They are not cross compatible, I have tried lol

Idk which ones Linus has used, but the electric "duster" (works like a vacuum, but focuses the exhaust) that I have is actually really good. It's not as powerful as a compressor, but it's way better than the compressed air cans, and doesn't stop working in no time. Also, on top of all of the waste, what pushed me to buy an electric one is how terrible the canned air dusters have become. They don't seem to hold the pressure nearly as long as they used to.

LTT should do an updated video on newer ATX 3.0 and PCIE 5.0 power supplies. I'm trying to decide if I should get the Corsair 1200w Shift or something else. Would like to see more power supply videos at makers start producing these newer spec units.

I was SOOOO happy to have the LTT screw driver! My kids bought me one for my birthday and shortly after needed to assemble a wine cabinet. It had a so many damn screws and some were tough to get to during the assembly. The driver saved me a ton of time. Also, I work in AV for a Fortune 50 company, and let me tell you, many, many are tight lipped about live event streaming and off site streaming and other practices. We have had to dive in and teach ourselves how to do a number of things so we can provide what our upper level management wants. Thankfully, it's fun as hell.

this was suggested after i watched the all screen pc. 9 months later. lmao.

500Hz monitor. That is going to make reading emails one hell of a damn smooth experience.😂

Watch this in 2050 this is console grade

so nice to see LMG supporting smaller creators and letting Linus host this pc build.

Recommendation for large size screwdrivers is have a fitting on the back to fit a wrench to get torque on those rusted large screw

If you want to collab with DIY perks you could have a competition, you each get given the same problem and solve it in your own way, then you meet up and reveal your creations to each other and discuss the differences. You could even turn it into 3 videos, 1 each for building your solution, and another for meeting with each other to discuss the differences. I think it would be interesting to see the differences between the solution LMG and its huge resources produce compared to the expertise and aesthetics DIY Perks would produce. It also means you'd only need to be away for a day or two to shoot the collab without compromising the final products. If you come up with the right problem you might even be able to make it more interesting by gearing the LMG solution towards being a product to sell on the LTT store for people to buy and having DIY perks naturally offering the DIY alternative to it. Though obviously LMG would be putting forward a prototype for the collab rather than the final manufactured product because you'd never get a product made to LMG standards done in such a short time, and if the DIY perks solution is better you may want to incorporate some ideas from it into the LMG product or get viewer feedback.

I love how cheap or expensive they always give us more affordable options

Love my Datavac blower for cleaning parts, works amazing!

The only true benchmark is how fast the cards fall when you win a game of solitaire

Holy crap! Linus finally made it past the first level of Doom Eternal!

I used to work on sales at the biggest air conditioner store in Brazil. With 3 warehouses feeding the whole country it was already a nightmare for us at sales. I can't even imagine the nightmare it is for accounting. Depending on the origin and destination state taxes would apply and shipping would get way more expensive. But I guess that is the price of scaling a business.

Quick tip about the fixed handles screwdrivers. Maybe put a hole in the handle or a common standard hex shaft or something. Always nice to be able to put some extra torque on it when needed.

the psready guy made a good point a week or 2 ago about the state of games vs hardware. the low supply and high demand of the ps5, and slow response to the situation caused game devs to not go too hard on making games good enough to actually fully take advantage of the latest and greatest hardware coming out, simply because they need to sell to everyone to make money,

At first I was thinking that 800 dollars isnt bad, then you said, "for a 1080p monitor" 💀 It makes sense though. You'll have a better chance at being able to fully utilize the full range for the refresh rate compared to having a 500hz 1440p or 4k monitor.

I gamed on a 1080p 60hz monitor for years. When I got a 1440p 144hz Gsync a few years ago....the difference was unreal. Actually makes my RTX 2080 stretch its legs

Just one day prior to this live I've ordered the Hyte Y60 Snow White and the display for the screen mod. Amazing

The thing about that screen, is that you could probably just buy that kit, and not put it in the case. Just attach it to the side of your actual monitor or something. And the idea of using another video source is pretty good. You could have something like a PiKVM monitoring your system, and have a display of data without it actually impacting your system performance at all, and it wouldn't freeze if the system had an issue.

Does it support back light Strobing? If it can, that would mean 1 ms of image persistence.

Ltt got hacked and started live stream

Linuis or LMG or Luke need to look into a Datavac ESD for an electronic duster. I have one and it's honestly amazing.

I don't even own a pc but when i do im going to be ready with the amount of pc building videos I've seen

theyre back!!

36:00 thought I was watching Canadian QVC. Lol love the new products.

56:00 Twitch does not compress anything, except for the lower quality versions. The source quality on a stream is just a straight up `-c copy` for both audio and video, at least it used to be. Twitch explained this in their dev blog. It is much more cost-effective to impose restrictions on bitrate, resolution, frame rate, and other factors than it is to transcode the same resolution as the source.

Banana for bedtime guy here. I was just thinking you could make one that has a big zip down the side and a removable cushion section that you place a banana shaped hot water bottle. Honestly I'm not trying to make this sound "dirty". I just think a banana is nice shape to cuddle at night. . . . . I'll get my coat. . . . . In the meantime I can't wait for my LTT screwdriver. Thx Linus.

To be honest that is one of the most honest give aways I have seen in a long time a 3 in 25 chance is generous even for the low tier prices good on you guys ltt.

I use an 18V Ryobi workshop blower with 3 settings, it is very effective. Before that I occasionally used a cordless leaf blower but it just seemed a little crazy.

my favorite part about Linus is that he has never gone full Neil Degrasse Tyson on us and just thought he was the only one with an important opinion. been watching the LTT channel for... sheeeesh idk. almost a decade now? keep at it man.

Everyone has to start somewhere Linus, but taking a shot at Paul's Hardware wasn't cool.

I have that case and I do enjoy it.

It would be really cool to see behind the scenes for F1 as for computer tech. If you guys were able to do that I would be extremely shocked F1 teams are very closed doors, understandably. The only thing I could think a team may be down to do is maybe talk about the computer systems they use, and maybe(wishful thinking) they'd let you come to a practice day but I highly doubt it they'd let the cameras roll while the system is in use. For people that don't know, the top teams spend around $100 million a season they gotta have some cool stuff. They actually have a team back at the factory monitoring systems during races, as well as a team on site, like a command center back home then a mobile command center. Now I just thought about it, you may be able to get F1 to let you see their stuff as for what it takes to track cars and broadcast the races, definitely not as cool as seeing what the teams are using but still would be interesting

Holy Crap!!! I love this info that Linus is putting out!! It is like I am in Biz201 in highschool taking University classes senior year!! This is great additional content around 2h mark!!! I feel like I should be taking notes!

I would watch a LTT 3D printing channel with Dan

I came to the live stream 5 seconds before it ended :D

Started watching for the "Tech" but became enthralled with the nitty gritty of the many permutations of running a business. The "T-Shirt" example was absolutely amazing. The honesty and transparency is very refreshing. Roughly starting @ 2:00:06

Sometime in 1997 I was invited to attend a demo for BeOS at UT Austin. They had a BeBox that had a dual PPC processor set up. We got to see the BeOS run some amazing graphically intensive tasks, run video and just totally rock our minds. There was a game demoed called “nerd kill” that was hilarious. You had a window full of tiny walking nerds and all you had to do was click with your mouse and kill the nerds. It was an awesome demo and I distinctly remember the presenter talking about hopefully being the future OS alternative for Mac and windows users. The audience each got a CD copy of the most recent at the time version of BeOS. Later that night I remember installing BeOS on a second drive in my Power Computing Power Tower Pro 250. It was an interesting time for computing at the time.

8:30, eh, Bannerlord can probably use 16 cores at full load if not GPU-bottlenecked, I know it can use 10 just fine

Imagine having that case with the little screen side panel and using a raspberry pi connected to it and have the screen output the feeds for your home security cameras. That would be cool.

I use the smallest shopvac to blow electronics off. I only use it for this, so it stays clean. Just attach the hose to the exhaust port.

That looks like the display panel freightliner uses for their digital mirrors on the cascadia.

Can't wait for WAN show LET'S GO!

Listening to Linus fumble about building a PC is far better entertainment than listening to music while closing at work. Wish I could've caught this live.

I'd love to see a video on how the stream is done and all... I think Cathode Ray Dude was mentioned just because he's been covering commercial video mixers and such like news stations would legitimately use but of course upgraded to the new hot tech, but it's not like the older stuff isn't amazing and I just find it fascinating as well so I think there is definitely an audience, but maybe not as much as other content but it also seems like a lot of popular videos are usually the unexpected cool vids that weren't even put together quite as well as a proper review or polished successful video. 🍻🌎❤️📺🖥️💻📽️

Anyone else have the issue of the clickable link just randomly opening and taking you to Facebook when your phone is sitting on a counter and in full screen? This channel does it for every single video and I don't have this issue with any other channel.

I wish PC parts was cheaper

144hz 1440p is okay for me :))

I did figure out what float plane is but. I Certainly would Not mind an explanational video especially if it mentioned things like how it came to be

What was the power consumption of the set up, what was it's energy efficiency like?

Absolutely LOVE my XFX 7900XTX. Fantastic GPU

No millennial pause on this one.

production quality so good didnt even realize it was a stream 5 mins in

8:22 a game that could utilise all the cores would be arma 3 if you go into the parameters tab in the game launcher you can force the game to use any number of cores

Regarding the statements about nearly all games not taking advantage of the highest core modern CPUs, clearly you haven't thrown Star Citizen at them. Regularly see utilization of all cores/threads on my 7950x

Linus really makes everything seems harder than it should be

39:53,during the ad, linus in the background: "Don't forget what?" 😂👌

What I really want in a screwdriver is a #2 phillips with "THIS SCREWDRIVER STOLEN FROM LITTLE MEG" engraved on the handle. I have had to buy 5 replacement #2 phillips screwdrivers in just the last two years, because people keep taking them. I even quit getting Xcelite or Klein ones, and got cheap ones from Horror Fright instead, and people still stole them. #2 phillips is what I need about 98% of the time. I use a #1 phillips about 1% of the time, and all other sizes and types, combined, about 1% of the time. Does Plastidip come in pink? When I started only getting pink charging cables and USB flash sticks, people stopped stealing those.

7:10 And that's why people are waiting for the 7800x3d... Why pay extra for only half the cpu to get an improvement?

These streams need to be done more often. Problem is I can't find the time to watch it since it's so long 🙃

1:06:52 I have used cans of compressed air before. I found them to be useless and hate them. I bought an "XPOWER A-2 Multi Electric Computer Duster Dryer Air Pump Air Spray Blower Vacuums" and to me, it's amazing. It gets rid of all the dust for me in less than a minute. To hear Linus say that all electric blowers he tried were trash was a shock to me, the Xpower one I have was one of the best purchases I've ever made.

You should make a set of screwdriver tips branded as "Linus Tech Tips" lol

How much in total is on this table?

Honestly, you should just send me the pc

You should work on two separate halves of the same project and have episodes on both channels leading up to the final… being a two part episode where you combine the two halves you each worked on.

you guys should do a build where the monitor is bulit inside the pcs case behind the back glass or smt

YOUR CHANNEL GOT HACKED BY TESLA

19:40 Maybe do it like how you did your collab with nerdforge. Have things done on either of your ends, and then move to when the things are ready for finishing touches.

Linus, look into the Ryobi blower. Model#: P755. It has 3 settings so you can be safe. On high it rocks.

The purpose of the pattern, kata or form is to teach you the different moves in a memorable way and to develop the body's ability to move fluidly between techniques. like learning to dance or the alphabet. Structured Sparring teaches you how to actually use the different moves. Then free sparring teaches you to use them randomly and effectively. Most schools don't really do the last two well if at all so most people end up boxing with a few kicks thrown in.

Where is that all-screen PC video Linus mentioned in this stream? Has it not been put out yet?

Your channel is awesome man

Will not lie... having the chat on the PC case is kinda dope... if you have the case close enough to the camera and have a lens where you have enough depth of field you could do the "chat on the side of the screen" but in camera :P

A few more ways monitors can improve in the future. Power consumption, power efficiency, and panel heat output. I honestly don't now how much power my monitors consume, I'll admit. But I do know they throw A LOT of heat. I have a 2560x1440 main monitor and a 1920x1080 secondary monitor, both about 2 feet from me. Even with my ceiling fan on high and my desk fan, which I specifically bought for this reason, on high, my desk area gets stupidly warm.

I just upgraded to almost this exact build, sans the monitor, and an EVGA 3090 FTW3 I was able to get for half the current price. From AMD PILEDRIVER. AMD FX-8320 to AMD Ryzen 9 7950X3D. I am absolutely loving it. It's been a much needed upgrade and time to spoil myself.