The $60 Adirondack Chair for Backyard Comfort!

Рет қаралды 2,975

2 ай бұрын

Summer time is here and here's an easy project to make for friends and family or to even sell for a side hustle or wood working business. Leave a like and comment down below and subscribe if you haven't already
Instagram: / bearviewllc
Merch: www.bearview.squarespace.com
MATERIAL CUT LIST BELOW:
(2) 2x4 @ 20 3/4 inches with both ends cut parallel at 15 degrees off-square (back legs)
(2) 2x4 @ 20 inches (front legs)
(2) 2x2@ 26 1/2 inches, longest point measurement, one end cut at 15 degrees off square (arm support)
(2) 2x4 @ 31 7/8 inches, one end cut at 35 degrees off square to longest point, other end cut at 20 degrees off-square to shortest point - see Step 2 (stringers)
(2) 2x4 @ 22 1/2 inches (front apron and back support)
(5) 1x4 @ 22 1/2 inches (seat slats)
(5) 1x4 @ 36 inches (back slats)
(1) 1x4 @ 19 1/2 inches (back top support)
(1) 2x4 @ 19 1/2 inches (back base support)
(2) 1x4 @ 27 inches (arm rests)

Пікірлер: 13

@user-yf5no8py8n 2 ай бұрын

Turned out nicely!

@stephenlipton525 2 ай бұрын

Hi from Ireland! Loved the video and have subscribed to the channel. I have been looking for s simple adirondeck chair to build. keep up with the simple easygoing style and keep the mistakes and suggested adjustemt like sanding before assembly in. It helps us mere mortals see that these results are within our reach with simple tools! Regards.... Steve

@bearviewllc 2 ай бұрын

Hi Steve! That’s much appreciated feedback! You can definitely make the chair too!! I look forward to providing quality content to you and others

@drakekoefoed1642 2 ай бұрын

there is a plan for a similar chair where the slats run crosswise.the seat and back are both curves that are a lot more comfortable than flat surfaces. they have them in golden gate park, and i have seen wood ones also.

@bearviewllc 2 ай бұрын

Okay cool, thanks for the heads up and a potential video and project to sell. I’ll definitely check it out

@dre7637 2 ай бұрын

Great job!!!

@bearviewllc 2 ай бұрын

Thank you I appreciate it

@wsfnbystephanielynnc 2 ай бұрын

Well alright! WTG!👍🏾🙏🏾❤

@Gigi_1977 Ай бұрын

Beautiful chair! What kind of wood did you use?

@bearviewllc Ай бұрын

Thank you, this was just made out of regular pine due to being a chair in my woodshop. But if you’re looking for longevity I would do pressure treated for the elements. It will be a little more expensive but it’ll give that extra protection. Only thing is you’ll have to wait about a year till you can paint it or stain it with pressure treated

@Gigi_1977 Ай бұрын

@@bearviewllc thank you!

@melissabreedlove8211 2 ай бұрын

U used ur driver for a drill and ur drill as a driver… shld have flipped those.. but other than that… good luck on ur future of the channel… unfortunately ur gonna have to actually show the whole build if u want ppl to keep watching.. u can’t just say.. “it’s easy do this or that” if ppl wanted that they wld have read how to do it on the internet

@bearviewllc 2 ай бұрын

I appreciate the feedback. I will take that into consideration for future content