Рет қаралды 431,010
I have long wanted to make a detailed video of how the cables in my builds are made, so here we go. My guide for making the perfect length cables, every time.
The process consists of 9 steps:
1: Cut wire to length + 5-10 cm
2: Crimp one end
3: Put sleeving and heatshrink on, and finish that end
4: Stretch the sleeving, and cut where you can feel the wire ending
5: Burn the end you just cut, and squeeze the sleeving together
6: Route and cut the wire to final length
7: Crimp the other end of the cable
8: Stretch the sleeving again, it should now fit precisely with the terminal
9: Put heatshrink on, and finish the last end.
To follow a worklog of this build, check out this link:
www.overclock.net/t/1634667/sponsored-the-grey-wolf/0_20
Or visit my facebook page: DesignsByHPS/
Materials and tools where purchased from:
www.e22.biz & www.pexonpcs.co.uk