The Advanced Combat Helmet (ACH) Mods - Redefining Issued Equipment (Episode 5)

Рет қаралды 24,152

3 жыл бұрын

If you find yourself in a unit that requires the use of this ACH and does not allow the use of an aftermarket ballistic helmet don't stress it there are a couple of mods that you can make to this helmet so that it is more comfortable and more functional.
Oregon Aero Helmet Pads & Chin Straps and the Ops Core Chin Strap are the two mods that you can make to the helmet for the comfort piece. Both companies have exceptional products. The helmet pad system is like putting a tempur-pedic bed around your head, and the ops core chin strap wont itch and scratch like the standard issue one it comes with. We highly recommend making these mods because they are superior to the issued components and will make your life easier.
www.oregonaero.com/helmet-upg...
shop.gentexcorp.com/ops-core-...
When it comes to the helmet covers there are better helmet covers on the market but if you are required to use the issued helmet cover we recommend adding velcro to the front, sides, and back of the helmet to help give the helmet cover a more adaptable sense of purpose.
www.entrygear.com/product.asp...
www.skdtac.com/FirstSpear-ACH...

Пікірлер: 50

@robertdonnell8114 2 жыл бұрын

Indeed Oregon Areo pads and kits are the cat's meow. I do also recommend them.

@LegionPreparedness 2 жыл бұрын

I agree!

@Joshua.Carrasco 2 жыл бұрын

Awesome video. Thank you for the information!

@LegionPreparedness 2 жыл бұрын

You bet!

@miletello1 3 жыл бұрын

You should consider the team wendy harness. It's amazing.

@LegionPreparedness 3 жыл бұрын

I have it in my airframe. I’m going to do a setup video on. For this video though I had to keep in mind some of the restrictions that airborne units put on aftermarket components I’ve seen guys get scratched from jumps cause they didn’t have the “correct type / style” pads for jumps. But I love the team Wendy harness and pads they are incredible !

@miletello1 3 жыл бұрын

@@LegionPreparedness big army is sooo fucking stupid 😂

@LegionPreparedness 3 жыл бұрын

I'm trying with everything I can to be a voice of reason and help articulate experienced based information to help guys get the authorization to go out and purchase gear so that they can increase the performance at the individual level and then through the teams, squads, platoons, companies, battalions, and more. I would love to look back in the future and know that all this time, effort, and work put into all this helped service members out and allowed them to justify specific points to commands to allow them the freedom to make equipment decisions on their own.

@smesaric 3 жыл бұрын

Any experience with the 4d helmet pads vs the oregon aero ones? Anytime I've heard anyone talk about the 4d ones i've always heard that they were absolutely the best, and they are a little cheaper too.

@LegionPreparedness 3 жыл бұрын

This is the first time I’ve ever heard of them. They look solid to me from the pictures. I would absolutely buy them they look well constructed and your dollar looks like it’s going a little further with a little more. I’ll put it on the list of things to look further into

@smesaric 3 жыл бұрын

@@LegionPreparedness thanks for the input brother

@madarchermoto4955 Жыл бұрын

I bought a Velcro kit for my helmet from shellback tactical and it was junk. Peeled off with patches, super thin and didn’t stick well with accessories. Velcro started separating from the adhesive for no reason. So I went to Walmart and bought the $3.70 Velcro kits from the craft aisle and custom cut my own Velcro kit, and it stuck better and held accessories on better than any of the online kits…….. and it’s stuck good, doesn’t seem to be going anywhere.

@luke50469 8 ай бұрын

Im having trouble finding an OD green helmet cover for a XL ACH helmet

@kacasio1 2 жыл бұрын

How are the pads with sweat? I sweat a ton and my helmet pads were always soaked.

@LegionPreparedness 2 жыл бұрын

to be honest no matter what helmet or pads ive ran in them they all get hot and they all retain sweat. Its just a matter of getting a fan and circulating air through the helmet at night to dry it out.

@JosephsCoat 2 жыл бұрын

You must have some chill senior NCOs

@LegionPreparedness 2 жыл бұрын

Lol I am an senior NCO and all of this is to mentor and teach all service members, change the narrative in the military when it comes to equipment, and to help build trust between officers and NCOs. so that we can just spot check guys real quick and then focus our efforts where they really matter

@JosephsCoat 2 жыл бұрын

@@LegionPreparedness well good on you for being practical in terms of training and gear. I always had control freak E-7s and up. I totally get it for instilling disciplinary things. But everything from gear to field craft had to be 100% by the book. Always pissed me off when some PFC would creatively find answers to solutions when LTCs writing policy couldn’t and the junior guy would be dismissed and maybe even smoked for using his brain.

@jimmycannon1968 3 жыл бұрын

God bless the Herd!

@LegionPreparedness 3 жыл бұрын

YES

@chriswools638 Жыл бұрын

Ah, a fellow herdsman. I can appreciate that

@LegionPreparedness Жыл бұрын

that was a long time ago

@intergalacticchicano 10 ай бұрын

Man if i would have known about putting counter weights on my Kevlar and mitch helmet it would have saved me a lot pain both figuratively and literally. Putting those old school NVGs when i was the Poggiest of PoGs then when I was a scout. It sucked that it gave you neck pain and headaches, not including how it used to till your helmet forward. Too bad the Army was or is such an ass when it comes to making improvements to your gear.

@intergalacticchicano 10 ай бұрын

Btw i also served at the Herd from 2002-2007, good unit lots of pride and history. Not my favorite unit but not my least favorite either

@LegionPreparedness 10 ай бұрын

Agreed! I’m glad I know what I know now to help the military enhance its capabilities and atleast slow the process at which we hemorrhage experience and knowledge. Good to see a fellow herd guy on here as well!

@Frens03 Ай бұрын

Go Sky Soldiers!

@b-rad6978 2 жыл бұрын

can you fit walker's razer active headset under these? or will i need a high cut

@LegionPreparedness 2 жыл бұрын

I would go with the high cut the walkers are kind of bulky

@b-rad6978 2 жыл бұрын

@@LegionPreparedness thanks for the reply. I actually just received an ACH that I ordered after watching your video and was going to highcut it if my walkers didn't fit. The size large ACH helmet fits my walkers under just perfect, I could go highcut for sure but I like the ear protection.

@LegionPreparedness 2 жыл бұрын

@@b-rad6978 another guy asked about getting ach helmets cuts. I’m waiting for the guy to reply with his website

@b-rad6978 Жыл бұрын

@@LegionPreparedness Kustom ACH I found cuts them for about $100

@LegionPreparedness Жыл бұрын

@@b-rad6978 they are a awesome company ! He’s updated and done a lot of overhauling on his site from when I first found him a couple years ago

@99Racker 2 жыл бұрын

One suggestion: take a permanent black marker and color out the brand name on the band. Thanks for the video.

@LegionPreparedness 2 жыл бұрын

Thanks for the suggestion!

@antoniocapilupi1225 11 ай бұрын

Random question, what watch it that?

@LegionPreparedness 11 ай бұрын

Garmin delta tactic I’m actually looking at selling mine

@antoniocapilupi1225 11 ай бұрын

@@LegionPreparedness I had the Garmin tactical solar and it only lasted a year, started randomly shutting off and it wouldn’t hold battery life anymore. I’ll check it out, I’m always looking for good items to last

@Gamer_Ghost251 Жыл бұрын

how did you paint the helmet

@LegionPreparedness Жыл бұрын

diamond and circular mesh with just rattle can spray paint. Tan as the base and then brown, green, grey, and black for the terrain / environment your in. Tan base - let that dry Diamond mesh - for your browns and greens, let that dry on the helmet - use 550 to help keep the mesh tight to the helmet Small circular mesh - for greys and blacks - cover the diamond mesh with the small circular mesh and use 550 to secure the mesh tight to the helmet. (be conservative a little bit goes a long way) Once its all dry remove the mesh and you should be good to go

@Gamer_Ghost251 Жыл бұрын

@@LegionPreparedness thank you. it look nice