Hi Steve it's 2nd April 2023 and this is the first time of seeing you loved this have now subscribed. Ty 😂
@cherieducotebreaux38042 жыл бұрын
I love the black one best. It looks like black opal!
@ParkerE9242 жыл бұрын
So trying this tomorrow on a tumbler!! Brilliant!!
@christinaperson11682 жыл бұрын
These turned out great! The one with the black background is my favorite! Always love what you do! Thank you Steve 😊!!!
@DOTTYTIME2 жыл бұрын
You do the stuff with resin that I am to chicken to try
@carolynmozzone4122 жыл бұрын
Great idea! Love the black😀
@missbrat7112 жыл бұрын
Those look amazing AND its on sale for Canadians on Amazon.
@LisaVornhagen2 жыл бұрын
I love the holographic effect! I think the black one and the white one are my favorites. Beautiful!
@joycepugh53472 жыл бұрын
Sweet - love this idea - thanks for the awesome share
@KarenYauney4 ай бұрын
Perfect!! Thank you for sharing
@Ali-H34442 жыл бұрын
I make these but i put the film in my coaster rough side up. Pour in my resin and when its set i pull off the film then its permanently on the piece without all the extra steps you just did. Then if you want you can make a mold of that piece then you never need the film again.
@Zalfabets2 жыл бұрын
Great idea!
@offairhead2 жыл бұрын
Yes. I’ve seen others do it that way and it seems so simple. I can’t wait to start crafting again (I’m moving so everything is packed up) so I can do this.
@Ali-H3444 Жыл бұрын
@Dream_Sickle cut your window film to the size of your coaster. Peel off the backing and stick it to the bottom of the mold. Then add resin. After it cures, unmold it. Then peel off the window film if it sticks to the resin. It might stay on the mold which is great. That window film is pretty thick and resin doesn't adhere to it. I made a ton of windchimes out of coaster molds and that film. Just drill holes and add those clear crystals. Good luck sweetie!
@tattersall667 ай бұрын
Do you mean you put a thin layer of clear resin, cure then add the film, then more resin on top
@Ali-H34447 ай бұрын
@tattersall66 no I stick the film in my mold. Then resin.
@ownsacat2 жыл бұрын
Thats neat. Love the red one
@debranoble84452 жыл бұрын
They're all so pretty but I like the black one better because you can see the holographic pieces better and then I like the clear one followed by the white one then the red one
@lucindagardener61002 жыл бұрын
My favorite is the black
@sandyeubanks49722 жыл бұрын
Very very pretty
@MCher2 Жыл бұрын
So pretty, thank you!
@1972chezza2 жыл бұрын
thank you for your videos it has given me the confidence to start using resin., and i made some coasters.
@joycecaldwell41372 жыл бұрын
So beautiful!
@craftingcuties3249 Жыл бұрын
Great work love the outcome
@KatherineTheGreat5012 жыл бұрын
Awesome! Those are pretty.
@jeanniesartadventures61462 жыл бұрын
Hi Steve, fellow Norfolkian here 😉 like you I think you can never have too much sparkle, it makes life happy. Love these btw, right up my street.
@meduza652 жыл бұрын
Probably a comment you have already heard, but I always save my expired gift cards & expired credit cards to use to burnish things like this. Extra bonus, they can be used to do dishes as well and actually have a couple local restaurants using them too to clean counters and cookware. Seems to be my underpaid calling these days with all the inflation hitting world wide.
@RebelBart672 жыл бұрын
Those are pretty cool!
@DesleighDorrstein23 күн бұрын
Love these
@dragonfly98512 жыл бұрын
QUESTION how do you think this would work in a pyramid or the lage crystal mold if stuck two pieces together back to back and put it in the center of the mold as you poured? New experiment maybe?
@dylanharrell5032 жыл бұрын
He made a video a few weeks ago about how to make a resin pyramid and save resin. If you use that technique in a clear pyramid and then go back after it cures put the holographic paper on and then fill up the rest of the pyramid it might work.
@michelle_resinrebel2 жыл бұрын
Thanks for sharing great tips ❤️
@Kimmie9782 жыл бұрын
Awesome! I think I'm going to start a Patreon channel for myself so I can buy more supplies! 🤣
@dollybrown19932 жыл бұрын
Oh so pretty!! The only drawback I see is that once you've poured resin on them you can't reuse the holographic material..... With the molds you can reuse them. You can even make or buy insert to go in different molds. I'm currently making several of different shapes and sizes for my own use. ( trays, jewelry, ect.) Just remember if you are going to make inserts that you NEED to make them very thin, and also make sure to treat them gently. Stay safe, you do you, and stay crafty👍👍🔔🔔🦋🦋
@ConnieConnie8242 жыл бұрын
Beautiful
@rowanstephenson31922 жыл бұрын
Marvellous 👍❤️
@k9htm2 жыл бұрын
Wow I love it!
@bonny96802 жыл бұрын
That looks awesome Steve, very nice effects 👍 😀
@jaxgonsalves2 жыл бұрын
Brilliant!
@rebeccabartley50612 жыл бұрын
I am a holo addict, anything holo, i go crazy for.. love this idea, i have nothing but holo nail polish i have been playing around with too. and yes, black is the absolute best color to showcase holo.
@catrinafairlady84042 жыл бұрын
For me, this is a game changer. Thank you, Thank You, THANK YOU!
@heatherwells67232 жыл бұрын
You must read my mind, lol. I just ordered a 25 pack of the same holographic sheets to see if this would work. There are 5 different holo prints in the pack. I purchased 1 holo mold, and as much as I love it, I wanted to make different things, but the molds can be pricey. I've been so afraid to try this for fear of wasting resin. Thank you so much bc now I am super excited to try so many different things!!!!!! Steve, you are the best & my favorite crafter hands down. ❤️❤️❤️❤️❤️
@lindaeastment45422 жыл бұрын
HI Steve, OMG WOW 🤗 my goodness thank you so much for taking the time to do a demo & share your super lovely Sparkly holographic coasters I loved them 👍 I will definitely be looking Into getting some of the film 👍✨🤗😀 Lin
@spectonkular75102 жыл бұрын
Oh my dayzzz! I wish I had seen this before buying one of those expensive moulds! Oh well I will use this idea too and double/triple my production! Lol Thank you Steve 😊 my resin guru!!
@leannewright96862 жыл бұрын
Glad to hear you ordered your 3D printer it’s another obsession …. I swear your like the male crafter version of me jack of all crafts anywho I blame my adhd but what I was gonna say is that keep your eye out on Amazon warehouse for cheap PLA the warehouse staff are extra careless with stock and I get loads of bargains on warehouse don’t think I’ve had a single item that was a return all was broken boxes and so far all my PLA has been warehouse best one was half price cause the exterior box had a rip right through it!
@irenerhynes67322 жыл бұрын
Thank you Steve, you always come through. Love your tutorials.
@christinedas3202 жыл бұрын
Love the black background one. The others are good too.
@christinevenner1832 жыл бұрын
Very beautiful and not complicated!
@carolthorburn29792 жыл бұрын
Really pretty 😍 my favorite is also the black the colors shimmer so much really really pretty. I do like the others as well. Many thanks for sharing another great video Steve hugs from Québec Canada 🇨🇦 🤗 🫂
@TektonicDragon2 жыл бұрын
I really love the holo effect! All of them are just so pretty!
@fizzliebob2 жыл бұрын
I was thinking about trying out those molds to see if the end product really does come out holographic, but I don't want to be making coasters, so this video has been very useful
@carlycharlesworth14972 жыл бұрын
Cool idea Steve. They are really pretty and mesmerising to look at. I would love a set of the white and black ones! God bless you and those you love, now and always. Have a great day Steve!
@victoriabutterfly6521 Жыл бұрын
How funny that you & I bought the same holographic vinyl around the same time for the exact same reason 😁 I didn't use mine yet though. Wanted to do it during my time off but the 10 days I was off were super stressful for me due to some news I got. So actually did not one bit of what wanted to do 😭 But now I know at least thanks to you that it will work 💕
@maiaallman46352 жыл бұрын
So pretty Steve.
@tinawells31602 жыл бұрын
I luv them, but... What about cutting, like a cat/dog, Micky Minny or something like that. That would b cute
@kristadesotejones84682 жыл бұрын
The white one looks like opel
@user-sf9mh1ms4q11 ай бұрын
I wonder if those Holographic Vinyl effect would transfer into the resin if sticked to the mold. Some crafters are using holographic window films to make a mold and the holographic transfers to the silicone mold. Then when you use that mold, it transfer to the resin.
@fairyspunfibers90982 жыл бұрын
Brilliant idea, Steve! They're all so gorgeous! ❤😊 You're so right about holographic molds being very expensive. Ouch! Worth it, if you afford it, but...yikes. 😲 A black background always seems to show off holographic stuff best, for some reason.
@vickicole24852 жыл бұрын
So pretty 😍 I love them all 💗
@lindas99772 жыл бұрын
Steve, I've become a paying member and answered all the questions to join Facebook group and have been declined three times. Help I don't know what else to do. And I just didn't know how else to reach out to you but to post a comment. Thank you
@rkhnd512 жыл бұрын
Love the effect but you couldn't leave them in the mold and add the film as you won't be able to use the scraper on them for the bond and expelling of water.
@judyjohnson26992 жыл бұрын
I have tried this and had a LOT of trouble getting the film down without bubbles, which is a bummer. I was totally with you on your thought process!
@craftinforcoinswithangelab396 Жыл бұрын
Love this! Where can I get the clear holographic vinyl?
@niccilefevre2 жыл бұрын
I thought I knew what you were doing...then you took a strange deviation lol. Dont waste the holo sheets. these work by using a very fine texture to create the holo effect, so you line the bottom with the sheet, rough side up, then pour into it. the sheets peel off and it creates a beautiful holo effect while being able to reuse the sheets.
@aieraelyn2 ай бұрын
I am a resin virgin, do you think this would help create a night sky effect? I eventually want to create a side table.
@JusSmith2 жыл бұрын
Hi. Thank you so much for adding me to the member shout outs💖 (but you spelled my name wrong: it's Jay Smith not Smity, 😂. ) ... I loved this tutorial and I'm trying them tomorrow as soon as I get off of work. I loved the results of the black coasters and I can't wait to make them.
@JusSmith2 жыл бұрын
@@SteveMcDonaldArtsandCrafts I'm so happy to have been able to finally join. I actually started resin crafting after watching your videos and I just have to say thank you so much.
@dragonfly98512 жыл бұрын
Steve I was wondering if you have ever thought of getting the glasses for your color blind?
@teenaleer64472 жыл бұрын
👍
@havacomment2 жыл бұрын
Those turned out really nice. This video reminded me of another floating around the tube somewhere detailing making holographic molds which were used for making holographic chocolates. Wonder if the same process could be used with resin? I've never actually done any resin projects but find your content very interesting 😊
@jennitalbot67852 жыл бұрын
It can. I had never seen anyone leave the holographic vinyl inside of the resin, but I like it, because you can put a clear coat over it, where as when you use the transfer method like on chocolate, you can not cover it or the effect goes away.
@bellaannecgoff23352 жыл бұрын
❤️❤️❤️
@ConnieConnie8242 жыл бұрын
Where do you sell your Resin pieces?
@vlg8482 Жыл бұрын
Gorgeous as usual. Do you still sell things if they have an air bubble. Also do you add something like pads to the bottom of your coasters to stop them from sliding around on the surface.
@georginasalazar12042 жыл бұрын
Can I do that with holographic window film?
@annagray6491 Жыл бұрын
Can you cut the vinyl with a die cutting machine?
@safehavensanctuary-hollyg.88142 жыл бұрын
Hi Steve, thanks for the beginner video. I still haven’t moved beyond UV resin. I tried to make a bangle with an insert using a mold and finally did one without air bubbles but it still has a rough edge on top. Thought I poured enough resin but it still had a valley. Can you do a tutorial with bangle molds and inserts? Also, what exactly is a “torch?” I thought that was a “flash light” in British terms but you can’t pop bubbles with a flashlight. One other resin tutorial KZfaqr advised against using a “lighter”. Is a short lighter more likely to melt the mold than a long neck lighter? Be well! “Enjoy your resin!”
@elizabethlaws91282 жыл бұрын
Don't use a short lighter to try to pop bubbles. He uses a long one like is sold for candles or grills. I've seen people use butane torches, but I've also seen them catch things on fire doing so! If you use a shorter lighter there is a very good chance that you will set your thumbnail on fire. That is smelly and if you keep your nails short quite unpleasant. Keep your flame moving and away from your mold, and of course the fewer bubbles you put into your pour the fewer there are to try to remove!
@teresaredmiles19642 жыл бұрын
Is the vinal sell sticking
@Jennygeee2 жыл бұрын
They look lovely Steve! Are they heat resistant?
@badassbloggettes47622 жыл бұрын
Hi Steve, I used Epoxy resin for the first time and my lighter to pop the bubbles but I couldn’t get them all popped, the mould started to smoke, can you give me any advice please, Thanks Sheena
@Thinkeringwitharts2 жыл бұрын
If it sparkles or is shiny we need it
@dylanharrell5032 жыл бұрын
Have you ever tried using cake sprinkles in resin? It might make a nice effect.
@enricolambrusco2449 Жыл бұрын
Is that regular holographic contact paper?
@Believe30 Жыл бұрын
Why do you add vinyl? You said you would sell them for $25. Is that each or for a set of four?
@ZippedUpKitz2 жыл бұрын
I thought you were going to use the holographic moulds… trying to find some WITHOUT fingerprints in them!!!!!
@liebedom25282 жыл бұрын
Hallo Steve kannst du mir bitte den link zu den Folien für das deutsche Amazon sagen ich finde es nicht dankkkeee
@wondergranny2299 Жыл бұрын
$20 for each one, or for a set of four?
@CyndiOyea Жыл бұрын
Hi Steve! Thanks for this. I’ve been looking for larger sheets like this! Question: couldn’t you just stick it inside the mold and it would transfer? I’ve poured resin onto holographic sheets and it transfers over. But this idea is awesome also! 🙏
@capatainnemo5 ай бұрын
you know you can take an silicone print of that plastic and sit it on top of almost cured resin
@DovahHouse2 жыл бұрын
That’s similar to getting an expensive holographic mold or an insert.
@bubblemum2 жыл бұрын
Are you going to shave down the edges that are sticking up?
@crinatoma68622 жыл бұрын
0
@ps38452 жыл бұрын
Hi Steve love how these turned out, Wendy @toonpishcrafts did something very similar to this but on a larger scale about 4 months ago you should check it out xx
@spongegirl71662 жыл бұрын
The red one is really cool hey do you have an American facebook page