Рет қаралды 6,561
In this episode I take you through what is in my opinion the best DIY live bait tank set up for on or off the boat.
This tank didn't take too long to do and you don't have to be handy on the tools to make it, it's only two drill holes and you can put it all together. I have tried to remember all of the fittings used as best I can so refer back to video when you are buying materials if any confusion.
items needed...
DRILL
1 DRILL-BIT to match the inlet elbow
1 DRILL-BIT to match the outlet plug
materials needed...
60L drum
-3m of 20mm clear pvc hose (inlet hose) note use size of hose that fixes to the back of your pump.
-1m of 40mm clear pvc hose (outlet hose)
-hose clamps for both ends of each hose
-marine grade adhesive
-1 inline pump
-1 flowrite power stream air rater
-1 inlet elbow plug as shown in video
-1 straight outlet plug as shown in video
total cost as of two years ago came to $400 so it is moderately priced but it will last forever if looked after.
I hope this helps you get onto some trophy fish in the future.
if you have any questions leave a comment and I will answer as vets I can.
hope you enjoy the info video.