The BEST Fender Eliminator for the Yamaha R1!

No video

The BEST Fender Eliminator for the Yamaha R1!

Рет қаралды 80,155

Күн бұрын

THE FENDER ELIMINATOR - bit.ly/2Bpk4Zl
Couldn't put it off for very long! NEEDED to get the fender eliminator install taken care of on my 2020 Yamaha R1 so I could free up that gorgeous rear end. TST Industries sent out their Elite-1 fender eliminator / tail tidy to get the job done. I've been using TST stuff for almost 7 years now and the quality is top notch. I did the same eliminator on my 2017 Yamaha R6 which, as you know, as a very similar tail and without a doubt, it's the best fender eliminator you can install on your bike. Got lots of parts already here and more videos to come, so make sure you're subscribed and have post notifications turned on!
Get your Motonosity Merch! - Motonosity.com/...
++ 🛡️ PARTNERS I RECOMMEND 🛡️ ++
Luimoto Designer Motorcycle Seats - bit.ly/389Ip0W
Ruroc Helmets - bit.ly/2Z0FEey
Motovation Motorcycle Parts - bit.ly/3f4oZjO
Chin Mounts - bit.ly/2DAJ6Fy (click link and use code "MOTONOSITY" for 10% off!)
++ ⚙️ MY GEAR ⚙️ ++
My Street Gear - bit.ly/351XlwK
My Motovlogging & Camera Gear - bit.ly/2x1m5bY
My Dirt Gear - bit.ly/2VCv10Y
My Motorcycle Phone Mount - bit.ly/2zoGRTJ
++ 📸 FIND ME HERE 📸 ++
Instagram - / motonosity
Twitter - / motonosity
TikTok - / motonosity
Exclusive Email Updates! - bit.ly/MotoNews...
Support the Builds on Patreon - / motonosity
Send Mail - PO Box 141836, Austin, TX 78714
WANT TO SEND A PLATE? - www.motonosity...
++ 🏍️ CURRENT BUILDS 🏍️ ++
BMW S1000RR M - bit.ly/S1K_Build
300cc Honda Grom - bit.ly/Grom_Build
Yamaha MT-09 - bit.ly/MT09_Build
Honda CRF450R Supermoto - bit.ly/CRF_Build
Honda Ruckus 171cc GY6 - bit.ly/Ruckus_...
++ 🏍️ PAST BUILDS 🏍️ ++
Yamaha R3 Streetfighter - bit.ly/R3_Build
Yamaha R6 - bit.ly/R6_Build
🎵 MUSIC
Epidemic Sounds - bit.ly/Motonosi...
📧 BUSINESS - motonosity@gmail.com

Пікірлер: 145

@madhavram146 4 жыл бұрын

Hoping you gonna do the Austin racing GP1R FULL EXHAUST SYSTEM 🔥🔥 for the Yamaha R1

@chris_k02 4 жыл бұрын

SC Project CR-T way better sound tone...🔥

@KentPhillips 4 жыл бұрын

@@chris_k02 gotta disagree. Austin keeps that deep crossplane sound to me.

@_Machine631_ 4 жыл бұрын

that would sound killer. Austin racing sounds so good.

@12bravo51 4 жыл бұрын

Bro be careful. I just bought a 2020 R1 Raven and they havent been able to unlock the ECU yet. The 2020 ECU is different from the 2015-2019. So swapping exaust ur R1 wont be running in the best way it should. So now i have a damn 2020 R1 just sitting in my damn garage 😡😡😡😡

@chris_k02 4 жыл бұрын

@@12bravo51 Oh man, that's a shity situation!

@jayholt2101 4 жыл бұрын

I got a TST fender delete for my 2019 zx6 with the integrated taillight and it’s fire. So easy to install and looks amazing. I keep returning to there site to see what they make next. I wish it was a little more tucked under the fender but it keeps the cops off me here in California. The only one I recommend.

@Ride4lifeR1_4life Жыл бұрын

I'm sure glad I found your channel, lots of good useful information. I too have a 2020 R1 I'm going to do sprocket change soon and flash.

@alexhammett1212 4 ай бұрын

Never has a video actually not delivered context as badly

@mannydcbianco 4 жыл бұрын

I had my license plate mounted just like you did at 8:04 and it looks soooo clean, but I almost got ticketed for it, and even reached out to a local attorney who specializes on traffic offenses and she said that if I do get ticketed for it there's absolutely no way to fight it. It is definitely not legal here in Texas, but usually they cops don't care. After that I moved it up to below my rear light. Doesn't look as nice (looks alright though as it's a very minimalist mounting bracket) but I won't get ticketed for it now.

@Da0R30 4 жыл бұрын

TST for the Win! Cause of you I have TST on my R6 and love it! I just didn’t wait as long as you did for the R6 to change it out, lol.

@LunchBXcrue 3 жыл бұрын

TST are the best! For such an awesome company that is pretty big now I still get to talk to them all the time on their videos on youtube, which is hella cool that they respond to anyone and everyone.

@Thelonewolf1154 11 ай бұрын

I love the placement of your license...."Simply Outstanding"

@vbkishore9731 4 жыл бұрын

Someone who doesn’t ignore his family duties while working. A man of quality

@mitch_cave 4 жыл бұрын

Aw man, so glad you still appreciate my plate submission!! 🤩

@jimmyeli7363 4 жыл бұрын

yoo!! I thought that was little man's head at 5:28!!! It was your knee...lol

@RagnarR1 4 жыл бұрын

I just barely sold my R1, to see this makes me buy another bike, but I can't due to this pandemic... I'm in Texas too close to Austin so I can't go out just like @Motonosity... lol

@_Machine631_ 4 жыл бұрын

I hate watching motonosity vids...I don't dislike him, but I dislike the fact I want to buy newer R1 every time I see him working on this bike. hahaha Loving how the r1 is turning out.

@lettersforvalen2612 4 жыл бұрын

Thats it. The re live of liscense plate... love to see that again.

@pascalvandenbroek5479 4 жыл бұрын

Man i really like the looks of this bike! You are living the dream!

@charliehenderson3404 4 жыл бұрын

Tst industries all the way!!

@Saul2jz 4 жыл бұрын

i completely changed how it looks. Beautiful 👍

@Zephyr.Lo-Renz 4 жыл бұрын

Lovin’ that hip-hop track you played at the finish of your fender eliminator 🤘🏽

@bfkrug 4 жыл бұрын

Cant wait to see the final result&the progress.

@jeremyhorne1989 11 ай бұрын

Gotta get the VF designs turn signals 🙌🙌🙌

@Firestorm637 4 жыл бұрын

Evotech performance makes some of the nicer billet aluminum tail tidy’s vs a stamped steel plate. Plus their billet aluminum are made hollow to run wires through. No wires visible.

@franufc8 4 жыл бұрын

Awesome job man, looks so much better!! Nice editing too with the step by step. Thanks for the video

@motonosity 4 жыл бұрын

Thanks man glad you like it!

@pwnzormcduck6546 5 ай бұрын

It's to bad they never make enough of them. Been trying to get one for months now. So it's either a really hot item or not many people buy it. They usually keep stock. Never had a problem getting anything for any of my other bikes from them.

@colbywishneski5800 4 жыл бұрын

just noticed that Motonosity is a MINIVAN MAN

@colbywishneski5800 4 жыл бұрын

good thing he has motorcycles too otherwise he would be a lame dad

@rafaelgarcia5974 3 жыл бұрын

I drive around without a license plate and have never been stopped! 🏍💨 😉 🚓

@gsalien2292 4 жыл бұрын

Beautiful bike! My 09 R1 Raven is basically a garage queen, but I want a 2020 R1-M, so this fender is what I want! Loved Austin back in the day....The Oasis,. Chuay's, Bee Cave Road at 160 MPH and day trips out to Enchanted Rock! Great video!

@muzzaanddrewsyoutubechanne7320 4 жыл бұрын

In Scotland our plate has to be fully visible this is way cooler

@kapilchaudhary4617 4 жыл бұрын

Bro,which exhaust will you put in this bike💥

@Gaulien 4 жыл бұрын

So lucky to be able to mount licence plate like that, here in the UK we have to have it sticking out at the back :-/

@masonbailey6442 4 жыл бұрын

I’ve never clicked on a video so fast.

@danejanis6639 4 жыл бұрын

Love the Vids, you deserve more likes 🤩

@mikeylg041 4 жыл бұрын

Racefit or werkes is the way to go !!

@Harmony_Worship 4 жыл бұрын

quality man 🔥 , would like to recommend to install a belly pan cover,

@WoodyRides 4 жыл бұрын

I seen my old plate in there! 🤣

@frowdo8455 4 жыл бұрын

Not first but earliest I’ve ever been😂

@motonosity 4 жыл бұрын

That’s all that matters 🙌🏻

@yamaharidaaa8732 4 жыл бұрын

Nice!!!👍🏼👍🏼👍🏼by the way, is this your first time showing your son?? His a cutie.. I got 2 boys as well..lol🤙🏼🤙🏼🤙🏼just waiting on the rest of your mods!!

@iBraap 4 жыл бұрын

Surprised JL Designs didn't make a closeout like they did with the R6, the rest of the kit is minty though. TST always delivers.

@chadknox6919 4 жыл бұрын

Jl designs does make an amazing close out for the r1. I just bought it for my r1 along with integrated tail light with side lights. The closeout runs about 120$ and is adjustable.

@iBraap 4 жыл бұрын

@@chadknox6919 I guess i meant the closeout piece alone. I have JL's closeout and TST's low mounting bracket on my 18 R6 just like Brent's setup was on his 17. Both companies make killer stuff though for sure.

@jaredbaray553 6 ай бұрын

nice vid! just had a question, for this low profile mount does it come with a led light for the plate? or do you not use one? thank you

@Zephyr.Lo-Renz 4 жыл бұрын

You should’ve tackled at the same time a lite weight battery install, too.

@ldp1993 4 жыл бұрын

Very good looking license plate stand.But here in Italy is completely illegal😠

@Jacobibrahim_ 4 жыл бұрын

I actually hope you so the taylormade exhaust for the r1, i have it on my 2016 r1 and really cleans up the bike and adds some carbon fibre to the under body

@madhavram146 4 жыл бұрын

Much Love from India ❤️❣️😍

@MostroMoto 4 жыл бұрын

Great video!

@asadplays7906 4 жыл бұрын

I love watching your videos 🤩

@motonosity 4 жыл бұрын

Thanks man!

@kunwarpratyush4250 4 жыл бұрын

This beast needs an undetail exhaust.

@Jonathann2000 4 жыл бұрын

When do we get to see the new exhaust? 😍

@dzachalski 3 жыл бұрын

Yeah! I got the same one . Best one on the market and can be set up legally or illegally on your R1 😅

@jacksoncoleman8073 4 жыл бұрын

Wait so you got a new r1 congrats man

@srinathsith1510 4 жыл бұрын

R1 looks good without mirrors

@motonosity 4 жыл бұрын

heck yeah it does

@mikeylg041 4 жыл бұрын

To the 4 people who disliked the video .. prob Think Busa’s are sexy

@digitalmotorhead5323 4 жыл бұрын

lol...

@WoodyRides 4 жыл бұрын

They mad because they hate finder eliminaters! 😂

@steveyork8069 4 жыл бұрын

In Indiana they’ll let you get away with almost anything,but not having illuminated plate usually gets you stopped.Is that not a problem in Texas.🏍💯👍

@motonosity 4 жыл бұрын

I didn’t have a problem on my R6. On my R1 it was a couple years before I had it mentioned.

@randyschmidt19 4 жыл бұрын

Check out the The NRC kit on my 2020 R1. Looks much better.

@digitalmotorhead5323 4 жыл бұрын

Awesome change, looks much better that way!

@da6965 2 жыл бұрын

I'm interested but I'd like to keep my stock turn signals. How does that work?

@tharunjprasad6517 4 жыл бұрын

TST industries 👍

@FreshRides 4 жыл бұрын

I've used TST for all my eliminators for tail and turn signals. I will comment and say the paint they use is trash/needs a better clear coat finish because it doesn't hold up over time.

@paintslinger1045 4 жыл бұрын

Just ordered a custom luimoto seat cover and gel insert.

@motonosity 4 жыл бұрын

Heck yeah man! You're gonna love it.

@giancarlofanigliulo6298 11 ай бұрын

Can speed cameras see recognise this?

@sinlungherald1787 4 жыл бұрын

Not first on the entire Globe, but hope first fron NE India🤟

@vincbestia 4 жыл бұрын

do you need light for license plate?

@udaytej4074 4 жыл бұрын

Bro is that legal in your country to keep the number plate below..

@motonosity 4 жыл бұрын

It depends on local jurisdiction but it’s typically not an issue

@Fazal828 4 жыл бұрын

did you mean to blur your plates and forgot to? Never seen a youtuber be so open with that

@muhammedashik2989 4 жыл бұрын

R1 🔥🔥

@aayazahmed5389 3 жыл бұрын

Turn signal lights?

@mystummyhurt2115 4 жыл бұрын

Deciding on a new R1 or Fireblade as my first litre bike. Your vids are making me very partial to the R1 😉

@kunwarpratyush4250 4 жыл бұрын

why not the 10r or a gixxy 😭

@mystummyhurt2115 4 жыл бұрын

Kunwar Pratyush ZX10Rs are a bit too track focused for my liking, the power on that bike is too up top. I don’t have any problems with gixxers but I don’t like the headlights, just personal preference. Imo the R1 is the sexiest and I love the crossplane motor, but from what I’ve read it seems like the new CBRs are the best street litre bikes

@mystummyhurt2115 4 жыл бұрын

CJCashMoneyIMVU 2017+ fireblades are really light, approaching 600cc territory. They seem to be a lot more adjacent to street riding than the R1. Also in the US the 2017+ Fireblade has depreciated heavily and can be bought new for 10k out the door. It seems like the fireblade would be the best option for street riding

@mystummyhurt2115 4 жыл бұрын

CJCashMoneyIMVU New Fireblade looks incredible. Haven’t looked into it too much because it is far beyond my price range, but if I had 20k to spend on a SuperBike I’d go with the rr-r

@jaywatson8720 4 жыл бұрын

I know I’m in the smallest minority but.....I actually like the original fender on the new R1s😶. I’m thinking I’ll keep it on when I get around to getting an R1

@gurvindersingh7471 Жыл бұрын

whats the liecence plate bracket part number

@jackhorner5011 4 жыл бұрын

Take the passenger pegs off too and it’s complete

@motonosity 4 жыл бұрын

Yep taking those off!

@kunwarpratyush4250 4 жыл бұрын

@@motonosity what are you making? a spacex rocket?

@ryu-rt4yc 4 жыл бұрын

I find the bike beautiful with f.on more than with the f.off

@ericsanchez9723 4 жыл бұрын

Where are you moving to? And what area in Texas are you from?

@Dozjah 3 жыл бұрын

Why have plates at all? I’m not stopping

@jeanruiz6298 4 жыл бұрын

These legal in Cali?

@iamilham7082 4 жыл бұрын

would like if u got license plate from a different country? like mine from malaysia.

@talonblack8250 4 жыл бұрын

how is that legal at that angle?

@Fast_Flick 4 жыл бұрын

Wow👌🏻👌🏻😍freaking awesome

@motonosity 4 жыл бұрын

Heck yeah!

@Fast_Flick 4 жыл бұрын

@@motonosity absolute stunning😍👌🏻👌🏻🙌🏻 ur ideas r always something new.. Stay blessed bro👍🏻

@LucKyvNiNjA 4 жыл бұрын

Toce exhaust to go all black? 😬

@taylorharmon3262 3 жыл бұрын

Anyone know if this setup is legal in TN?

@DanielBrown-yw5zc 4 жыл бұрын

Bro your the reason I went ahead and purchased the new R6 ! You got to stop man lmao I will go bankrupt now I have to get the R1 .... ugh! 😂😂😂😂😂😭😭😭😭 Are you going to track it?

@motonosity 4 жыл бұрын

Haha hey that R6 is sick tho! Yeah I’d like to

@T1k213 4 жыл бұрын

Bro how uncomfortable is the R6 though?! Lol I purchased a 2020 and traded it in a month later for an MT10 I couldn’t take it. Officially feel like an old man 😂

@motonosity 4 жыл бұрын

Tom R - haha yeah it’s certainly not meant for comfort but personally it’s not that bad 😂

@Daxboy16 4 жыл бұрын

Exhaust soon?

@HGE2007 4 жыл бұрын

Would this fit a 2018 r6

@jonathanvalenciavalencia6204 3 жыл бұрын

What that song called

@Armin-ry9rm 4 жыл бұрын

JL Designs turn signals?

@motonosity 4 жыл бұрын

👀

@adamkernohan 4 жыл бұрын

What happened to the Tesla? ⚡️

@caphegiotang9635 4 жыл бұрын

How much is this bike ?

@kindajal 4 жыл бұрын

smoked integrated brake and signal lights!!!

@ShafiqShikin 4 жыл бұрын

kicap dok

@madhavram146 4 жыл бұрын

Will you be getting ECU FLASH from bauce racing

@motonosity 4 жыл бұрын

When it’s available! Can’t flash these yet.

@madhavram146 4 жыл бұрын

@@motonosity but on their Insta page they have been testing it. Hopefully you'll get it

@LucKyvNiNjA 4 жыл бұрын

That’s the weirdest license plate placement I’ve seen

@SamS-bg3bk 4 жыл бұрын

My plate is exactly how that one is placed. Sleek look

@derbohmann4790 4 жыл бұрын

I still don't get why this license plate mounting is allowed. I mean when the police is driving behind you they can't read it at all.

@rocketsoda9188 4 жыл бұрын

Yeah this would never pass in my state. I'd get pulled over every 5 minutes

@ItsyBitsyWidow 3 жыл бұрын

@@rocketsoda9188 only get pulled over if you stop 😏

@delta182 4 жыл бұрын

Heck yeah.. Looks bad a$$.. need that 4 my 2019 R6

@motonosity 4 жыл бұрын

yeah dude! Check out the install vid from my 2017 R6 if you're interested!

@detroit12 4 жыл бұрын

Are these even legal!?

@Steve-ec6ed 4 жыл бұрын

Yamaha spends all the time designing the tail on this bike and making it look like a work of art and then they slap that rear fender on and take a shit on their design. I get why they do it, its just unfortunate.