The BEST Hi Capa Upgrades!!!

Рет қаралды 86,443

2 жыл бұрын

In this video we go over the best parts to your hi capa. All parts can be found on our store:
www.lacapacustoms.com/store.h...
We have many new products being made that are coming out in 2022, so be sure to stay tuned.
Also, like, subscribe, and follow our Instagram for more updates, and let us know what videos you want to see next!

Пікірлер: 131

@azzanoorbergen2136 2 жыл бұрын

Absolutely fantastic guys well done really like the frame design

@lacapacustoms 2 жыл бұрын

Thank you so much! Should release some more info on it very soon!

@tox1c8 2 жыл бұрын

I will be good to finally have a store that can keep up with there stock once all your parts are finalised doing good

@lacapacustoms 2 жыл бұрын

Heck yeah man we are getting our new year stock over the next week, and don’t plan to be out of stock anymore!

@usyachannel 2 жыл бұрын

私は日本のハイキャパファンです。この動画はハイキャパのカスタムをするのに勉強になりました。動画を参考にして自分のハイキャパ5.1をカスタムしようと思います。また、LA Capa Customsのショップも今回知ることができました。今年発売予定のシアーやハンマーなどを日本からも買えることを期待します。

@ethansmith9353 2 жыл бұрын

Keep up with the great and helpful vids

@lacapacustoms 2 жыл бұрын

Appreciate it!

@EscworksAirsoft 2 жыл бұрын

Thanks so much to trust in ESCWorks and use the HULK bucking in your build💪

@oimakoikelevra152 2 жыл бұрын

Have you tried the CLPD novel design piston head with the Edge v2 bbu? Would be nice if you guys make a review on that…performance, reliability or maybe if it could boost fps a little..

@DaSauceDatsBoss Жыл бұрын

What length inner barrel can I put on a 5.1 to fit flush with a Cow Cow threaded cap? Trying for the best range/accuracy outdoor build, but information is difficult to find. Thank you for all these great suggestions!

@lukeolson7322 2 жыл бұрын

Love the videos! Keep it up

@lacapacustoms 2 жыл бұрын

Thanks man! ❤️

@pumba5322 2 жыл бұрын

Can’t wait to get my conquer slide, la barrel and la magwell, it’s been a long wait, but will be worth it 😀

@lacapacustoms 2 жыл бұрын

Yes sir man the ultimate combo!!

@aceshakur3956 Ай бұрын

If you’re in Jersey be sure to stop by Totowa Airsoft and army/navy store located on 400 Minnisink road in totowa! They have everything you need to have a great time In anything airsoft, and yes! Tons of hi Capas

@mathewgajewski1925 Жыл бұрын

Liked and subsribed. I'm not ready to upgrade yet, I just want to replace the parts that are almost definitely going to fail. Slide, what else? Nozzle? Anything else? Ty

@emersonryanescueta4107 Жыл бұрын

That was a very nice gun..its a dream to build my own just like that ..

@godspeed2492 8 ай бұрын

Just cost around 400-500 dollars for these simple upgrades....

@irondan357 Жыл бұрын

can u please do a vid on ur new in house brass hopup unit? im really interested in it, but theres so little information out so far on it

@dennisdiaz4135 10 ай бұрын

Can you have a video upgrade for a KP06 if it can use a 4.3 guide plug and rod so you can place more buffers to short stroke it, and last is the We Dragon 7 because theres not much video upgrades on it due to its design and only few have it. And one more since youre building some aftermarket parts, can you make a tdc hop up chamber for hi capa's so we can keep up with what Novritsh products have same as to his mid placed low profile rmr red dot too. I'm planning to buy KP06 and a Dragon 7 and thats what plays mind for my build if i got this two to match up to SSP5, i hope you can read this so you can help me out to view some of upgrades available on the market on those unit. Ill watch more of your videos guys if I got the luck on those two guns.. Thank you..

@djshyproductions 2 жыл бұрын

dope video!!!

@lacapacustoms 2 жыл бұрын

Thank you!!!🔥

@ollinevalainen8642 10 ай бұрын

Great! How do you check that whether La Capa custom parts also fit for certain Hi-Capas by Armorer Works? Usually all instructions videos are for the TM Hi-Capa, not AW. Thank you!

@HPN295 2 жыл бұрын

love the Barrel, do you guys deliver to Germany ?

@chrisyo2178 Жыл бұрын

Question : can you put only 2 short stroke green buffers? Is it optimal?

@cfb1293 Жыл бұрын

Any word on when you guys will restock? Specifically the LimCat Speedcat.

@Radley_Airsoft 2 жыл бұрын

do you have an in person store? im new and looking for an hpa pistol that has decent parts so its nice to go to a store to learn about it

@lukedavis8700 Жыл бұрын

Do you know when the 5.1 tornado barrel and guide rod will be back in stock?

@Frambhueee 2 жыл бұрын

Hi!, capa! Xd I have this doubt, the thumb safety it has to be made of steel?, or aluminum its just fine?

@doncarne3263 Жыл бұрын

When are you guys gonna start making the Conqueror slides again?

@Yowans Жыл бұрын

I'm very new to airsoft and looked into Hi-capa pistols and as well as single-stack pistols, and I am curious about Hi-C upgrades and if they apply to most Hi-C models from different brands like Tokyo Marui, WE, Army Armament and such.

@crayden12 Жыл бұрын

from my experience. upgrade’s are pretty much universal amongst the brands. unless specifically noted or something idk. but yea, they’re all pretty much the same

@teraformsniper 8 ай бұрын

I 100% recommend the JAG pit viper TTI for the mid price of 220. it preforms better then my fully upgraded Tokyo Marui pistol (about 600 dollars)the only upgrade I added to my Pit Viper was a $150 drum mag (holds 450 BBS) and I converted the mag to HPA (mini compressed air tank with hose for much more gas. I also have a tracer unit and flashlight+lazer and have a attachable red dot but ZERO internal upgrades, I have 6 hi capas and I love them all, I have 4 5.1s a 4.3 and a 3.8 YOU SHOULD 100% GET A 5.1!!!!!!! the 5.1s are more accurate by far. I got a fully custom Tokyo that's about 600 bucks but I use my JAG TTI pit viper ALWAYS. the hope is insane. about 370FPS on green gas/propane and about 400-415 on HPA. the hopes curves it up about 20 ft at max. my recommendation

@Jooders 2 жыл бұрын

This is my favorite video

@lacapacustoms 2 жыл бұрын

So glad you liked!

@Lukaii 2 жыл бұрын

fourth :D thx for the great uploads

@lacapacustoms 2 жыл бұрын

Of course man!

@NanceLvr Жыл бұрын

Do you guys sell full kits? Just one with hop up, barrel, spring, bucking?

@mpzairsoft9142 2 жыл бұрын

What percent spring should I get for a am hive slide ?

@hendrikg3616 Жыл бұрын

So far I thought in terms of hop-up unit, bucking and barrel Maple Leaf was the best. I have a Crazy Jet 6.03, ML unit and bucking in my 5.1. Is switching to your mentioned components worth it?

@co1in_fps Жыл бұрын

id recommend 6.00 inner barrel, bucking is all preference, and by far the best hopup unit is the AM brass hopup no debate. if u use any other hopup it won’t last u

@justiningle8884 2 жыл бұрын

100% the cow cow short stroke kits swell up and crazy things I have three hi capa pistols and they have all done this through time

@lacapacustoms 2 жыл бұрын

PLEASE try our short stroke kit! it will be well worth it!

@Sinner.number23 2 жыл бұрын

What do you think on maple leaf hop chamber?

@magicmanspaz 11 ай бұрын

Will your hop up work on gel blasters?

@wingmanizer1912 Жыл бұрын

Hi, im thinking of getting the Hi-Capa 6 Custom, do internal upgrade parts still work for it ?

@Deadeye205 2 жыл бұрын

What blowback nozzles have the best fitment with the LA Customs turbo housing? I wanted to get a KJW red nozzle and was wondering if that would fit it well

@sLydFXv6 2 жыл бұрын

I think they mentioned the guarder nozzle that comes with internals fit best with the turbo bbu.

@Deadeye205 2 жыл бұрын

@@sLydFXv6 Thank you! I wanted to get the kjw red for the color since i preordered the pink turbo but i would rather have better performance and fitment over looks on my gun. Im going for a silver slide, frame, and grip look with gold and rainbow accents and thought it would be funny to just have some random pink for the internals

@lacapacustoms 2 жыл бұрын

We will have multiple o ring sizes so any will fit well, I personally really like the guarder shells!

@andrewtang9123 2 жыл бұрын

great video, only suggestion would be to kind of keep the product you are presenting stable so we can maybe get a good look at it, I noticed quite a bit of fidgety hands and that can get a bit distracting. (EG when you were presenting the double oring BBU)

@farizbadiuzzaman7874 Жыл бұрын

This is a very noob question. Is it possible to build one with upgrade parts on the market instead of buying a new tokyo marui stock first?

@dannywelborn2231 2 жыл бұрын

Any advice on rmr mounts

@0hJuicy 2 жыл бұрын

I'm the thousandth viewer and I'm proud

@lacapacustoms 2 жыл бұрын

Very glad!

@emsattt 2 жыл бұрын

At that point do you even need the TM base

@E210.VICTOR Жыл бұрын

Any parts that’ll fit my WE Tech 6” Irex Hi Capa?? 😅

@kirihikoazuma8045 2 жыл бұрын

Do you know of any Swiss Arms P226 mods? I’m working on my P226.

@omardiaz9432 2 жыл бұрын

Does this parts fits in a Jag Arms GM5?

@8man_01 2 жыл бұрын

How does the Aluminum AIP hop chamber set compare to the brass version and also the AIP brass version vs. the AM one? And with the brass version can an ML wheel and arm work with it or only the AIP ones? Still waiting for either you guys or Gaosen Kinetics to market your products in SEA region. Oh btw have you heard/tried of the Wii-tech short recoil BBUs with the double o-rings and early disconnect groove? Thoughts on the Edge?Guns Modify Blue standard/short stroked nozzle w/ internals?

@kai9086 2 жыл бұрын

Don't buy an aluminium bbu thats not better than Stock. I have the brass from aip and am the am has a better finsh and falls better. The aip one is good the maple leaf wheel fits but is not the best Stock tm wheel fits like garbage adjusting is horrible. I would defently take the Am with the pin that you can Stick your guide rod on it. Kind regards from germany

@lacapacustoms 2 жыл бұрын

Highly recommend the AIP aluminum one if you cannot get your hands on an AM brass. I find it works really well and do recommend. I have not tried the AIP copper one, but the aluminum one has done well!

@maxkoch6529 2 жыл бұрын

Do you ship over to Germany? Cant find slides for the 4.3 excepted on your site.. :(

@arthurpendarvis5524 Жыл бұрын

What kind of upgrades can I do on a hicapa baba yaga

@dorkstarx 2 жыл бұрын

Take my money 💰 🔥

@lacapacustoms 2 жыл бұрын

Sure, check out the website!

@Iamtyy3._ 2 жыл бұрын

what does it take green gas co2 gas

@sausageofmarnies2799 2 жыл бұрын

What do you guys thing of the ICS Challenger? And if you'd recommend it, how compatible is it with aftermarket TM spec capa parts?

@lacapacustoms 2 жыл бұрын

I have seen it and heard good things, personally I would stick with the TM base if you plan on doing a bunch of upgrades, but does look promising on its own!

@sausageofmarnies2799 2 жыл бұрын

Sounds good! Now just gotta wait till you guys restock, all the parts I want are currently sold out 🤣

@user-vp4jx7wr8e 10 ай бұрын

Are 5.1 frames and 3.9 frames the same size??

@kai9086 2 жыл бұрын

I love the cowcow guide rod with the spring and for barrel pdi 6.01 in 138 for 5.1 length. Test the cl project sear spring there better than the cowcow and am one 😅

@lacapacustoms 2 жыл бұрын

I will test the CL sear spring! And CowCow guide rod is good and pdi barrel too, just addressing my favorites!

@Ji-ato Жыл бұрын

if you replace all the parts in a replica, is it still the same replica?

@AYEitsVIC822 Жыл бұрын

I need a better visual demonstration of how the 6" inner barrel is made to fit a 5.1 hicapa with cowcow silencer adapter

@lunazwerenz5827 2 жыл бұрын

This made me think, 4.3 conqueror slides, I would definitely but it (if I had the money)

@lacapacustoms 2 жыл бұрын

We are making them now! Launching second quarter!

@lunazwerenz5827 2 жыл бұрын

@@lacapacustoms hallelujah I know what I’m saving up for

@jaycesama8877 2 жыл бұрын

Just a question. Is GBB and AEG inner barrel the same? not in lenght but compatible in the hop up unit for my hi capa since i need long inner barrel for my hi capa project.

@luisorozco8583 Жыл бұрын

No it’s not

@chills1228 2 жыл бұрын

posion dart will take over slides

@zigor1988 2 жыл бұрын

hi i would like to do similar, you have link to buy all thinksss ...thanks so much

@samsungdog4169 Жыл бұрын

Do these parts with the WE Tech hi capa 5.1

@kyle404040 2 жыл бұрын

I've not even been to an airsoft field yet and I'm contemplating spending big bucks upgrading the gold match i just got. In glad you are getting stuff in, was getting worried with 90% of upgrades out of stock. Was wondering if everyone had moved onto a new model i didn't know about.

@kyle404040 2 жыл бұрын

Hope you can ship to the UK and that importation isn't stopped because of some firearm rules

@lacapacustoms 2 жыл бұрын

Yes we ship worldwide, haven't had any problems to the UK

@lacapacustoms 2 жыл бұрын

No no the TM hi capa is here to stay!! We are constantly getting stock in, as well as have the lowest US prices. Highly recommend checking out the store lacapacustoms.com/store

@BingstonGames 2 жыл бұрын

i have a "7 we tech dragon pistol so finding an inner barrel is kind of a stumper for me.

@luisorozco8583 Жыл бұрын

You should check out Nine ball they have some

@96vmax4 2 жыл бұрын

Do you offer barrels that are longer than 6"? I have a longer version made by we and would like a better barrel

@lacapacustoms 2 жыл бұрын

Just 6in right now but some rifle barrels may suffice

@danielschmidt1990 Жыл бұрын

Curious.. What does the Tornado threads do? only looks or do they actually have a purpose

@Zaevia 11 ай бұрын

Saves a bit of weight

@reggieh6038 2 жыл бұрын

i would like to see a inner barrel that's around 125 mm so it works with a 5.1 slide but long enough to go inside a barrel adaptor for a little bit of added fps/ range

@DaSauceDatsBoss Жыл бұрын

Hi, Reggie. Have you been able to find something that works? Been working on figuring out and outdoor build. Any info you’ve discovered would be greatly appreciated

@reggieh6038 Жыл бұрын

@@DaSauceDatsBoss no unfortuntely. i also haven't been playing for a little while. life got me busy but if I do I'll be sure to post here and update you!

@DaSauceDatsBoss Жыл бұрын

@@reggieh6038 I appreciate it! I’m currently working on making a hi capa build. It may not be what I’m looking for, but it’ll still be better than my best stock sidearms. Once it’s bought and put together, I’ll tell you about it’s performance using numbers. (I’m very particular about actually doing tests to show effectiveness. Gun in a vice, no wind day, etc etc) Mine probably won’t have the longer inner barrel. But I’ll see what I can do with the build someone is helping me with.

@reggieh6038 Жыл бұрын

@@DaSauceDatsBoss So according to the fps video that la capa custom has the best thing to use is nineball 6.00mm TM socom mk23 6 inch barrel paired with the cow thread adaptor and it should sit flush with the cap. No cap you can see a tiny bit of it sticking out but its either keep the cap on or using a tracer and it will hide it nicely. Might have to shave down the nubs that hold the inner barrel to the hop up unit as I don't think it has cut outs on the socom inner barrel to fit the nubs on both sides of the hop up unit according to one of his build videos. Still iffy on shaving down the nubs on the inside of my expensive ass AM hop up unit. 😕

@reggieh6038 Жыл бұрын

@@DaSauceDatsBoss or according to deemoe (in his halo pistol build) you can run a PDI 6.01mm g34 inner barrel and it will sit flush with the outer barrel with no thread adaptor.

@darylsmith5734 2 жыл бұрын

Do you guys deliver to the UK? Need me one of those outer barrels.

@lacapacustoms 2 жыл бұрын

Yes sir we do! Under 20 US and no customs typically

@colemiller9892 2 жыл бұрын

Yo I messed up and didn’t see that my maple leaf inner barrel was 6.02 and the bb just falls straight through the bucking and barrel with no force

@SuperDeinVadda 2 жыл бұрын

Personally I wouldn't go below 6.03 for the barrel. Especially with bio bbs you may have trouble in colder conditions with 6.01 barrels. So many bbs got stuck in mine.. So don't worry about your barrel.

@sLydFXv6 2 жыл бұрын

Are the 5.1 outter barrels that la capa customs offer threaded????

@browngxd9324 2 жыл бұрын

yes

@lacapacustoms 2 жыл бұрын

Indeed they are!

@owensayers9169 2 жыл бұрын

i have a taran tactical combat master that ive been looking to upgrade would anyone know the best first upgrades to do would be?

@Snake305airsoft 2 жыл бұрын

Watch some videos of it and find out what matches for that that’s how a I learned

@lacapacustoms 2 жыл бұрын

Short stroke, recoil spring, guide rod, inner barrel, bucking. Those are the main ones, highly recommend TM platform!

@owensayers9169 2 жыл бұрын

@@lacapacustoms thanks a lot! :)

@SodaLiciousOfficial 2 жыл бұрын

Please release more heat gradation colors!!!!!!!!!!!!!

@lacapacustoms 2 жыл бұрын

We are on it, more heat gradation coming soon. Currently we are making a ton of products in all 10 rainbow colors!

@mrrpg7013 2 жыл бұрын

@lacapacustoms 2 жыл бұрын

Thanks!

@Str3tSpec 2 жыл бұрын

My tornado barrel I ordered never came with o rings :(

@lacapacustoms 2 жыл бұрын

All of the ones we made did? Reach out to our support team if needed!

@jonahmcintosh415 2 жыл бұрын

First

@lacapacustoms 2 жыл бұрын

😁😁😁

@bigdraco151 2 жыл бұрын

i like upgrading my guns

@lacapacustoms 2 жыл бұрын

Sweet 😁

@bigdraco151 2 жыл бұрын

@@lacapacustoms i have a short stroke kit innmy glock and hi capa now

@bigdraco151 2 жыл бұрын

do u have glock parts

@lacapacustoms 2 жыл бұрын

Yes we do we carry many of them, check out the site!

@bigdraco151 2 жыл бұрын

@@lacapacustoms ill look

@bigdraco151 2 жыл бұрын

@@lacapacustoms fot g18c?

@bodstrup 26 күн бұрын

You have so good info - but hard for me to watch, because your hands are constantly flapping around in front of the objects - almost nauseating

@Valentin-ri1zr 2 жыл бұрын

So we don't even need to buy a hi capa lmao Since we're changing every single part

@codyrollins3894 2 жыл бұрын

Don’t trust a word this guy says I have been continuously lied to for the past month As to when my stuff is supposed to be here text days to get a response then I get the same generic response every time it’s gonna be out next week it’s been going on for over a month

@Reepapers 7 ай бұрын

Hate to say it, but I think you just had a bad experience. This is a super good company and they make high quality products. Hopefully it was just one bad experience. Happy airsofting to you my friend. I hope your future experiences are better😊

@mechmaster11 22 күн бұрын

@@Reepapers yea ive had nothing but great experiences. ordered from them multiple times

@Reepapers 22 күн бұрын

@@mechmaster11 Glad its going well for you. Hope you continue to have amazing experiences. Happy airsofting brother❤️