Install Raid for Free ✅ Mobile: clik.cc/5WytI ✅ PC: clik.cc/DK969 and get a special starter pack 💥 Available only for the next 30 days!

I will never play raid just because I feel assaulted at this point.. that being said I think its cool that you are getting sponsors.

Ive kinda taken up my dad's hobby, I remember when I was just a little kid watching my father build gundams, I remember watching him build the red zaku as well as most of the 00 Raiser, but i never saw him finish it, sadly he got really busy and hasnt been able to work on kits in a while, ive explored our basement a few times and found quite a bit of unbuilt gundams, but also actually found his unfinished Raiser, I asked him about it and he gladly let me finish it, im honestly really sad that he hasnt gotten to work on any in a while, his most recent kit being a year or so ago when I got into gundam after all these years and he built the MG Sazabi Ver.Ka, he told me about all the gundam's i broke when I was little and it hurt me lel, thinking about all the hard work my tiny self destroyed unknowingly

Exia needs a 2.0 after all the others Season 1 suits come out...period.

in my own experience, the seven sword can actually hold the buster sword nicely with two hands and do some poses, which is way better than astray red frame kai. but then I accidentally destroyed it when dipping it in solvent to remove the paint, which I turned into a diorama mimicking the wrecked 00 in the ending, and just left it at my brother's shop. and somehow someone actually want to buy it and surprisingly paid enough for me to get an XN Raiser.............

RAID be like: oh yeah unrelated content advertising

I know this might be a little late, but after building the MG Amazing Exia, it looks like Bandai fixed the issues with the original Exia. Even with the backpack and weapons attached it can stand without issues. The joints are tight OOB and can hold the weapons.

I appreciate the work and effort put into the video, I think I will hold off until they do a 2.0 of the Exia. As you said in the video, Dynames and Kyrios are from season one, here's hoping they dont stop with Dyanmes and Kyrios and give us a fully loaded Virtue/Nadleeh Gundam.

Gosh, you startled me when you shouted ""GUNDAM!" hahaha. Nice video, tho. :)

Gah I would love to see you review the OO XN Raiser! I've been drooling over that kit since I saw it and would love to hear your complete thoughts on it!

I'll go with Exia Ignition mode and stick it to Repair mode until an Exia 2.0 since God knows that the repair parts will definitely end up as PBandai

I always enjoy watching your gundam reviews! Keep doing what you're doing! Wishing more subscribers to your channel!

2:12 to skip the ad.

I picked up the XN Raiser earlier this year, and I absolutely loved building it. I love the look of the 00, so I had to get it when I saw it.

Going to save up for Kyrios so I can customize it. Nice to have a transformable Gundam besides the Zeta types

aw you missed the avalanche exia dash version in the exia review

Nice! I've yet to see anyone else with the MG Gundam OO XN-Raiser except me. Expensive and very back heavy but it's so worth it when you see the finished product. 🤩 Kinda like when I finished my MG-E Unicorn Gundam. That led strip had me sweating till it was installed. And so many decals, they're the bane of my building existence. 😐

I must’ve gotten insanely lucky. The MG Ignition Mode Exia was my first ever gunpla and it went together with the only issue being a dangly beam sword handle on the right shoulder. I finished it last week and I’m still trying to decide if I’m going to convert him to the destroyed version.

I am very hopeful for a Exia 2.0. I would also love to see you review the XN-Raiser kit since i have been planning on getting it for like 3 months xD

Thank you for the insightful comparisson!

Couldn't agree more! 00 Raiser totally got me addicted to gunpla Hoping Bandai would make other S2 MG kits🙏

of course RAID is here why not they're everywhere

I just wish I know if Bandai ever plans to release an Exia 2.0 to keep up with Dynames and now Kyrios. And with Virtue in the background of the Kyrios box artwork, you KNOW it’s coming. Just like Kyrios was in the background of Dynames’ box artwork. :)

Im just very happy about this coz my very first gunpla is an HG OO RAISER. Now i have 4 gunplas,im hoping to collect more! Nice content as always!

FINALLY I knew I wasnt crazy about the exia MG. Just go with the perfect grade if you REALLY want an exia, its perfect

I haven't had a kit for like... close to 20 years? And when I saw the 00 XN Raiser I was just blown away and bought it... it's now making me build Gundams again... also just bought the Full Saber!

Thank you for the review

hmmm good to know, currently cleaning / re-panel lining and topcoating my sazabi ver.ka was gone do my 00 raiser next but might just order the XN to replace it (it was my first mastergrade i made some whoopsy's with it arm loves to come off for example)

Really Like That Parody Lol Gundaaammm ,Love your review and Channel

Just the video I needed

Love this video. It’s very helpful. I am going under the assumption that once they release the rest of the season 1 suits they’ll finish it off with an exia 2.0.

Great video gunpla’s awesome!

I got the 00 XN Raiser when it came out, and god did it feel like the build that would never end.

Exia really looks super cool and awesome video mate 😎👍

“Lockon sad times” at the bottom of the GUUNDAAAMM O-METER, had me rollin’ 5:11

Amazing review

They got you too with Raid Shadow

idk if this is a bit late but you should totally review the oo XN Raiser!

woah thanks for the review, i gonna hunt that MG 00raiser

Love the 00 Raiser to bits, but when I was building it, both elbows crumbled to pieces. Luckily enough though, I managed to glue them back together, but it's loose...

Wouldn't be surprised if we see a Gundam Exia 2.0 soon. Would make sense to have one to go with all the new molds.

Saw that MG Sandrock Custom in the corner at 13:38. Please do a review of that soon!

I've built the Exia four times now across the different variations made available and not a single one has been bad. They're all still holding the same poses and such, no loose parts, nothing falling off.

I want to get the MG Exia so bad, but I don't want to get one and then the 2.0 comes out!

Exia was my first MG. before, i only build sd and 1/144 kits but beacuse of this kit i got hooked collecting MG kits.

I have the Qan[T] in my back log from one of your best gunpla of the year videos :p I might get the exia mg just to get the full season 1 team(assuming the virtue is on its way).

I had been waiting hehehehe Please do a full XN Raiser review! It needs to meet my 00 Raiser, which actually was my first ever MG. as a fellow 00 Raiser builder, I gotta thank you for the love. #Gandamuuuuuuu!

I have all. In trans am. I also just got Dynames in trans am. Can't wait to build it.

I totally agree with you. 00 (XN) Raiser would have to be my favorite Setsuna suit. Follow closely by Qan(t)/Full Saber. Love me some Gundam 00. :D

Recently got MG Exia Ignition Mode, and they either fixed it all or I got a really good kit. No issues at all with joints, holding weapons or holding poses! Now I need another to use the repair kit on...

I have heard that they made the reissues of mg exia with the blue bandai logo have better plastic quality and hold up itself properly

i built the gundam 00 7 swords for my first gunpla and it was hard i should have started with the small gunpla but my gundam looks sick and just looking at it makes me proud for some reason

I know you did this in anticipation of the MG Kyrios and, inevitably, Virtue/Nadleeh; but I hope you can do this again this time for their RG counterparts.

I would like a full review of the MG Avalanche Exia Dash as well as the 00 XN Raiser please.

i go 00 7 sword, i've been wanting this kit for a long time.

I'm still going for Exia because I want to complete my Season 1 Celestial Being kits., it gets hate for being floppy yet if your a fan, despite the negatives, you will still love it on your shelf.

The Gundam shout startled me.

Yeah, pls make a review on the MG 00 (XN) Raiser! 🥺 🙏

The MG 00 Quanta FS is actually my 2nd gunpla ive ever built as well as my first MG

a pre-2010 kit that i love is the 2009 exia repair

Seed MG series are the most sturdy gunpla kit of all time. I have them since they're out and believe me they are still tight even after years passed

i'd say 2005 would be a better cut off point, as the 2.0's started then, with the gundam mk 2 which is a great kit

Coming back to this vid after they revealed the MG Kyrios box! Virtue/Nadleeh coming next! Just a little more and Exia 2.0, baby!!

Between all the OO gundam kits, the seven sword is the only one That I can pose without a stand. That's a big plus in my book compared to the others. And you can pose on the ground with the buster sword or gun and he will still stand.

My 00 Raiser was a hand grenade. Shoulder parts and the Raiser itself would fall off if you looked at them funny and at the time I didn't have a stand so getting it to stand up on it's own was a matter of balancing it on the Raiser without the Raiser popping off. Been meaning to revisit the 00 Gundam in general but I am wary.

I would love for you to do a review of the 00 XN Raiser! 😁

I got the 7 swords, dynames 2nd, and kyrios hopefully. I'm still targeting the qant and exia

Do you actually have a Gundam 00 XN Raiser review? Cause I can't find it. (Awesome video btw, and I think the more recent "Repair parts Exia" is an updated/2.0 version)

Cool, got the Exia, 00 Raiser and the full saber. Ordered the seven sword and dynames, and this video pops up

My MG XN Raiser only came with one LED unit so I think you might've either got extremely lucky with a mispackage or mine is missing a part. Either way it's a decent kit. I want to get the MG seven swords and combine them all together with a bunch of lights for an absolutely everything style build. Also you'll want to get another XN unit if you can cuz then you can make an even cooler 0 Raiser.

I love the Ptolemias look of the 0 XN Raiser

I was building one of those Quanta 00 MGs about two years ago. I spent an hour putting the hand together, polishing off the stub marks, panel-lining the fingers, etc.. I start working on the next arm, when the index finger just falls off the hand. So, I take a closer look, and I see what looks like a small seem slowly split down the panel-line of the palm of the hand, and it spreads down the connected panel-lines. So, yeah, I watched the palm of the hand slowly crumble over the course of 15 seconds.

Please can we see a Master Grade OO Raiser/XN Raiser review in full detail? It'd be really awesome

See I’m new to this all and this general style kit as well as the angel wing kit are among the ones I want the most

The Exia isn't really that bad. I think they improved the plastic since it was first released.

007 gundam = james bond's mobile suit GGUUUNNNDDDAAAAMMMMM

same 00 7 sword was the gundam who made me loved it even more

I love the Seven Sword but just for the gun. I hope it can be bought separately and get the 00 Raiser.

Basically if you combine all of those oo gundam you get the metal robot spirits gundam oo + 7 swords + raiser + xn unit but in mastergrade

I NEED A MG EXIA 2.0!

Hey man, really love your reviews btw. I wanted to ask what do you think about the recirculation color exia neon purple? Will it have the same problem as the 2009 original exia? Because i really like the color of the kit

They're well built I hope I can be like a builder like you sirr

The toy store you bought it from reminds me of the one in Toy Story 2

Would love to see a review of the MG 00 XN Raiser

Thanks for this video. I somehow agree with your ranking. I own the regular MG Exia and even if it looks good as a kit, it has some loose parts. I did tighten them up and now it is alright but still, I hope that Bandai will release an Exia 2.0 because the current MG isn't capable of doing some Anime-Exia poses. The manipulators/hands of the kit are just not good enough, the LED that passes through in front looks like a joke compared to Dynames' GN Drive, articulation is not the best, and it has weak joints. There is really a need for the 2.0 especially when you want to collect the first generation kits of gundam 00. The 00 and 00Q in the video are better kits, but I still hope that in the future, they will get their 2.0 counterparts as well. It may be a long shot and will require a lot of work but it will be worth-it for sure.

The GUNDAM!! meter got dying 🤣😆

This reassures me so much because I'm new to gunpla and I always fuck up the stickers so all I do is put it together and I bought the 00 QuanT and I want to buy the 00 Raiser which are #1 and #2

It would be really awesome if you could review the xn raiser set!

Can you do full review for MG 00 XN RAISER, I REALLY LOOKING FORWARD TO IT! :D

Ye I’ve got a Mg exia repair, thank for it was the new/fixed one where the negatives are fixed. No doubts about buying that one Take that gundam scale

The hg 00 kits are actually amazing my favorite being 00 7 sword g

00 raiser’s design is what got me curious to gunpla. Very sleek and beatiful design

After watching 00 season 2 eng dub, Mecha's Setsuna impression is painful

4:53 i can safely say that as far as old kits, the RX-79[G] Ground Gundam, despite how much of a pain in the ass the legs were to put together, is built like a brick shithouse. If it came with extra pairs of hands for holding the weapons instead of relying on the poseable hands to hold everything [ which is my one major gripe about this kit], it would be much better. The joints are nice and tight and it holds even my AGE-- Magnum's behemoth of a gun fairly well, something the magnum can't do itself but i attribute that to the screws in the ground gundam's shoulders. It's my favorite grunt suit and i'd snatch up a 2.0 in a heartbeat if they ever release one for it.

I've seen Sword Strike, Astaroth, Fenice, and No-Name. Frankly, I also got an HG 00 7SG. But honestly it looks really awkward with that huge sword, it gives a weird unbalance feel to the side. It can only be help if the Gun was also mounted on the right. . Definitely would go with the other 00 versions if I'm planning to get an MG.

Thanks so much for this review. I needed a new Exia replacement and now I know what to buy. Old Exia looks awful with the rest of the MGs on its team.

Hopefully we get a Exia 2.0 just like how the Strike got it's RM(aka 2.0) after the initial SEED Gundams all came out.

Thanks to this video i can finally differentiate exia, 00,and qan[t], i still havent watched the anime so idk wtf am i looking at, i do however have the hg 00 raiser + gn sword iii

if you notice it, the left cheek of exia is actually a little slight off to the outer side of the head. of course it is hardly noticable, but if you are the one who assembled it, you will see. i just realized it after i built my avalanche exia's head.

I would be so happy if you showed us The perfect 00 xn riser 7 sword combination in one kit